Canon Imageclass Mf8050cn Quick Start Guide

 
Starter Guide
 
  
 1  Preface  
 Next Page 
  
 2  Installing the Machine  
 P. 4 
  
 3 
  
 Configuring  and
Connecting the Fax  
 P. 11 
  
 4 
 Appendix  
 P.  A - 1  
  
 
 
 
   
 
 Connecting to a Computer 
and Installing the Drivers 
 
 P. 15 
   Read this guide first. 
 Please read this guide before operating this 
product. 
 The remarks for important safety 
instructions are described in Basic 
Operation Guide. Read the guide also. 
 After you finish reading this guide, store it in 
a safe...

0-2
 Setting Up the Machine to Suit Your Needs 
 Determine which machine functions (Copy, Print, Fax, PC Fax, Scan, Remote UI) you intend to use, and make settings 
according to the flowchart below. 
 Copy   Fax  Settings  froma Computer  Print 
 Scan* 
 PC  Fax 
 Print 
 Scan 
 PC  Fax 
 Required  Operations 
 Preparing the Toner Cartridges  P. 5 
 Loading  Paper 
P. 6   Connecting the Power Cord 
 P. 8 
 Registering the Sender Information 
  P. 11 
 Fax  Settings 
 Settings are now complete....

1
 Checking the Supplied Accessories 
 1.  Confirm that all the supplied accessories are contained in the box.  If an item is missing or damaged, please contact our Canon 
Authorized Service Facilities or the Canon Customer Care 
Center. 
 The machine unit 
 The following parts are already 
installed. 
 Paper  cassette 
 Toner  cartridges 
•
•
 Power  cord 
 User Software CD-ROM 
 Limited  Warranty  Notice  Telephone  cable 
 Speed dial label 
 Starter Guide (This manual)  Basic Operation Guide 
 Legal...

2
 User Software CD-ROM 
  
   About the Drivers and Software 
 The drivers and software included in the CD-ROM supplied with this machine are as follows. 
  
 MF  Drivers 
Printer driver You can print from an application using the machine by installing the printer driver on your computer. You can process print data at high speed by compressing the print data using the 
computers processing capabilities.
Fax driver If you install the fax driver on your computer, you can select “Print” from an...

3
 About the Supplied Manuals 
 Read this manual first. 
 This manual describes the settings for 
the machine and software installation. 
Be sure to read this manual before 
using the machine. 
 Starter  Guide 
 Basic Operation Guide 
 e-Manual 
 Read this manual next. 
 This manual describes the basic 
machine operations. 
 Read the desired chapterto suit your needs. 
 The e-Manual is categorized by subject to 
find desired information easily. 
  
 
 
 Determining the Installation Site 
 Front View...

4
 2.  Remove the packing materials.  The packing materials may be changed in form or placement, or may be added or 
removed without notice. 
*
 1.  Carry the machine to the installation site. 
    Carrying the Machine to the Installation Site 
and Removing the Packing Materials 
  
 
 
 Hold  the  grips. 
 Carry the machine with two or more people. 
    
 
 
(1)
(3)
(2)
   
 
 Remove the packing material. 
 Remove the packing material.  Open the rear cover. 
 Remove these packing materials after. 
*...

5
   Preparing  the  Toner  Cartridges 
 Open the front cover. 
 Pull out the toner 
cartridge tray. 
 Close the rear cover. 
 
   
 Did you remove all the packing materials? 
 Check! 
 Tape x10 
 Packing materials with tape x3 
 1.  Open the front cover and pull out the toner cartridge tray. 
 Open the feeder.  Remove the packing 
materials with tape. 
 Close the feeder. 
  
  
 
 
 
 
 
   
 
 Press the lever. 
 Preface1Installing the Machine2Configuring and Connecting the Fax3Connecting to a Computer...

6
 3.  Push the toner cartridge tray back in, and then close the front cover. 
 2.  Pull out the sealing tapes on the four toner cartridges. 
 Did you remove all the 
packing materials? 
 Check! 
 Sealing  tape x4 
    
 
 
  
 
 
 Pull out the 
paper cassette. 
 Remove. 
 Hold down the 
toner cartridge.  Pull out the 
sealing tape. 
 Close the front 
cover. 
 Push in the 
toner cartridge 
tray. 
 1.  Load paper in the paper 
cassette.  
   Loading  Paper 
  
 Hold the paper cassette with both hands. 
 

7
 Load the paper. 
 When loading Legal size paper •
  
 Hold the lock 
release lever. 
 Adjust the length of 
the paper cassette. 
  
   Make sure that the paper stack does not 
exceed the line of the load limit mark. 
 Check! 
 Push in the paper cassette. 
 Hold the lock release lever and 
slide the paper guides.  Slide the side paper guides. 
 Slide the paper guides to the 
width of the loaded paper. 
 Slide the paper guides to the 
width of the loaded paper. 
 
   
 
 Set the paper 
under the hooks....

8
   Connecting the Power Cord 
 1.  Turn ON the power of the machine. 
 2.  Specify initial settings. 
 Select with [] or [], 
and then press [OK]. 
    Turning the Power ON and Specifying the Initial 
Settings 
  
 
    
 
 
 Press the power switch. 
 Language French
Spanish
Portuguese
English 
 Do not connect the USB cable. Connect the USB cable when installing the software. 
 Check and press [OK]. 
 
Open back cover; see
if orange packing
material is removed.
Next 
 Select with [] or [], 
and then...