Canon Imageclass Mf7470 User Guide

Machine Settings
12‑22

Printer Settings
7. AUTO ERROR SKIPSets whether to clear an error and continue printing 
automatically when an error occurs (Error skip).
Error skip only temporarily clears an error, so the data may not 
print correctly.
This setting is valid even if multiple errors have occurred.
–
–
OFFThe auto continue is off. You must perform error skips from 
the touch panel display.
ONError skips are performed automatically.
8.  ERROR TIME OUT
Sets the length of time before the machine...

12‑23
Machine Settings

Printer Settings
4. POINT SIZESpecifies a point size for the default font. This item 
appears when the number in  is that of 
a proportionally spaced scalable font. (4.00 point–999.75 
point)
5.  PITCH
Specifies the pitch for the default font. This item appears 
when the number in  is that of a fixed pitch 
scalable font. (00.44 cpi–99.99 cpi)
6.  FORM LINES Sets the number of lines to be printed on a page. (5 lines‑128 
lines)
7.  SYMBOL SET
Selects the symbol set most suited to...

Machine Settings
12‑24

Printer Settings
10. ENLARGE A4Sets whether to expand the printable area of A4 size paper to 
that of Letter size in width.
This setting is applicable for the PCL5 printing only. The PCL6 
printing is not supported.
This setting is applicable for A4 paper only.
This setting is applicable for portrait orientation only.
–
–
–
OFF All the area on a page 1/8" (4.23 mm) from the top, bottom, 
left, and right edges is available for printing on A4 paper.
ONAll the area on a page...

12‑25
Machine Settings

Printer Settings
12. RESET PRINTERClears all print jobs in progress and resets the printer 
function.
OFF
ON
If the machine is being used on a network, please note that 
resetting the printer may affect data being received from other 
users.
If you reset the printer, data may be deleted for print jobs that 
have already been received, or received while the printer is being 
reset. However, in some cases, the data is not deleted from the 
machine’s memory, and the print job may...

Machine Settings
12‑26

Address Book Settings
Setting ItemDescription
Register AddressRegisters the destinations in the Address Book. Up to 300 
destinations can be registered. (See “Storing/Editing Address 
Book,” on p. 4‑58.)
One‑touch Buttons Registers the destinations on one‑touch buttons. Up to 200 
destinations can be registered. (See “Storing/Editing One‑
Touch Buttons,” on p. 4‑71.)
 

12‑27
Machine Settings

Report Settings
Setting ItemDescription
SettingsSets the report functions. (See Chapter 11, “Appendix,” in the 
Reference Guide.)
TX ReportSets whether the transmission report prints out.
For Error OnlyPrints a report only when a transmission error occurs.
Report With TX ImageSets whether to print the first page of the document under 
the report. (When you are sending a PC‑Fax or a color 
document, the first page of the document is not printed even 
if you set [Report With TX...

Machine Settings
12‑28

Report Settings
RX ReportSets whether the reception report prints out.
OffNo report is printed.
For Error OnlyPrints a report only when a reception error occurs.
OnPrints a report every time you receive a document.
Print ListPrints lists.
Address Book ListPrints the destinations registered in the Address Book (one‑
touch buttons and Address Book).
One ‑touch Buttons Prints the destinations registered in one‑touch buttons.
Address BookPrints the destinations registered in the...

12‑29
Machine Settings

System Settings
Setting ItemDescription
System Manager SettingsSets the system manager information to protect the contents 
of System Settings. Once the system manager ID and system 
password is set, they must be entered every time you access 
the System Settings menu.
System ManagerSets the system manager name (max. 32 characters, 
including spaces).
System Manager IDSets the system manager ID (seven digits).
System PasswordSets the system manager password (seven digits).
Device...

Machine Settings
12‑30

System Settings
Allow ID Unknown Printer JobsSets if print jobs from computers with unknown IDs are 
accepted or rejected.
On
Off
–
–
Allow ID Unknown Remote 
Scan Jobs
Sets if network scan jobs from computers with unknown IDs 
are accepted or rejected.
Off
On
–
–
User ID Management*1Sets if the user ID management is used.
Off
On
–
–
Network Settings*1Sets the network setting. (See Chapter 6, “Network 
(imageCLASS MF7480/MF7470 Only),” in the Reference 
Guide or “Set the Machine...

12‑31
Machine Settings

System Settings
IP Address Range 
Settings
Sets whether to use the IP address filter function.
OffDisables the IP address filter.
OnEnables the IP address filter.
Permit/RejectSelects whether to permit or reject access from a specified 
IPv4 address or IPv4 address range.
RegisterSpecifies the IPv4 address or IPv4 address range to be 
restricted.
Single AddressSpecifies a single IPv4 address to be restricted.
Multiple 
Addresses
Specifies a range of IPv4 addresses to be...