Canon Imageclass Mf7460 User Guide

Machine Settings
12‑32

System Settings
IPv6 SettingsSets IPv6 Address settings.
Use IPv6Sets the use of IPv6 address.
Off
On
–
–
Stateless Address 
Settings
Sets the machine to obtain the IPv6 address automatically 
using the machine’s MAC address and the prefix (information 
indicating the network belonged to) included in the RA 
(Router Advertisement) notified by the router when the 
machine is started.
Off
On
–
–
Manual Address SettingsSets whether to set a fixed IPv6 address to the machine. 
OffA...

12‑33
Machine Settings

System Settings
IP Address Range 
Settings
Sets whether to use the IP address filter function.
OffDisables the IP address filter.
OnEnables the IP address filter.
Permit/RejectSelects whether to permit or reject access from a specified 
IPv6 address or IPv6 address range.
Reg.Specifies the IPv6 address or IPv6 address range to be 
restricted.
Single AddressSpecifies a single IPv6 address to be restricted.
Multiple 
Addresses
Specifies a range of IPv6 addresses to be restricted....

Machine Settings
12‑34

System Settings
WINS ConfigurationSets the WINS settings to resolve a name with WINS.
OffSets the machine not to resolve a name with WINS.
OnSets the machine to resolve a name with WINS.
WINS ServerRegisters the IP address of a WINS server.
LPD SettingsSets whether to use LPD as the print application.
On
Off
–
–
RAW SettingsSets whether to use RAW as the print application.
OnEnables the use of RAW.
Use BidirectionalSets whether to use bidirectional communication.
On
Off
–
–...

12‑35
Machine Settings

System Settings
Receiving MAC Address 
Settings
Sets whether to activate a MAC address filter.
OffDisables MAC address filter.
OnSpecifies a MAC address filter to access. MAC address must 
be entered for each setting.
RegisterRegisters MAC addresses. Up to five MAC addresses can be 
registered.
EditEdits MAC addresses.
EraseErases MAC addresses.
Proxy SettingsSets the proxy settings.
Use ProxySets the use of a proxy server.
OffProxy server is not used.
OnProxy server is used....

Machine Settings
12‑36

System Settings
SMB SettingsSets the SMB settings to use the machine on a NetBIOS 
network.
Use SMB ClientSets whether to use SMB Client.
OffSMB client is not used.
OnSMB client is used.
ServerEnters the NetBIOS name of the machine.
WorkgroupEnters the name of the workgroup the machine belongs to.
CommentEnters a comment about the printer.
LM AnnounceSets if the machine notifies the LAN Manager of its existence.
Off
On
–
–
SNMP SettingsSets detailed information about SNMP.
Use...

12‑37
Machine Settings

System Settings
Enable Dedicated PortSets or browses detailed information on the machine with a 
Canon printer driver or utility.
On
Off
–
–
Ethernet Driver SettingsSpecifies the type of network connection.
Auto DetectSelects the detection method of Ethernet driver.
OnSets the machine to determine the communication mode 
(Half duplex/Full duplex) and Ethernet type (10Base‑
T/100Base‑TX) automatically.
OffSets the communication mode and Ethernet type manually.
Communication 
Mode...

Machine Settings
12‑38

System Settings
SMTP Authentication 
(SMTP AUTH)
Sets whether to use the SMTP server requires SMTP 
Authentication (method for authenticating users who have 
logged in the POP server before sending e‑mail).
OffDisables SMTP Authentication.
OnEnables SMTP Authentication.
User
Password
–
–
SMTP ServerRegisters the SMTP server name.
E ‑mail Address Enters the e‑mail address your machine will use (max. 64 
characters).
POP ServerEnters the POP server IP address or name (max. 48...

12‑39
Machine Settings

System Settings
Fax SettingsSets the facsimile communication.
Send Start SpeedSets the transmission start speed for faxes. (33600bps, 
14400bps, 9600bps, 7200bps, 4800bps, 2400bps)
Receive Start SpeedSets the reception start speed for faxes. (33600bps, 
14400bps, 9600bps, 7200bps, 4800bps, 2400bps)
Memory Lock SettingsSets whether to receive and store all documents in memory 
and not to print automatically. (See Chapter 4, “Sending and 
Receiving,” in the Reference Guide.)
Off...

Machine Settings
12‑40

System Settings
FaxSets the forwarding condition for received fax documents.
[disregarded]: Disregards the Fax Number information as a 
forwarding condition.
[does not exist]: Forwards the document if the Fax 
Number information does not exist.
[equals]: Forwards the document if the Fax Number 
information matches all of the characters entered.
[differs from]: Forwards the document if the Fax Number 
information differs from the characters entered.
[begins with]: Forwards the...

12‑41
Machine Settings

System Settings
Forward w/o Cond.Sets whether to store the forwarding destinations of a 
received document if the forwarding settings of the received 
document are not registered, or if the received document 
does not match all of the forwarding conditions that you 
have specified.
Forwarding DestinationSets the destination address to forward the document.
File Format*1Sets the file format of the document you want to forward.
TIFF
PDF
–
–
Detail/EditYou can check or change...