Canon Imageclass Mf7460 User Guide

Original and Paper
2‑24

7 
8 Press [Done] repeatedly until the 
Basic Features screen appears.
 

2‑25
Original and Paper

Useful Functions
You can use the following useful functions.
Automatic Paper Selection/Automatic Drawer Switching
You can set which paper sources can be used for Automatic Paper Selection (APS) and 
Automatic Drawer Switching (ADS). This setting can be made independently for all the 
different functions of the machine, and is especially useful when you want to use different 
paper sources for different purposes.
Paper sources set to [On] are used for the following functions:...

Original and Paper
2‑26

5 
① Select [Copy], [Printer], [Receive], or 
[Other].
6 
①  Select [On] or [Off] for the stack bypass 
and the other paper sources.
Details of each item are shown below.
[On]: Makes the paper source eligible for 
APS/ADS.
[Off]: Makes the paper source ineligible for 
APS/ADS.
The numbers on the screen represent the 
following paper sources:
Stack BypassPaper Drawer 1Paper Drawer 2
②  Press [OK].
Regardless of the stack bypass setting, 
you cannot select [Off] for all of the...

2‑27
Original and Paper

Paper Supply Indicator
The paper supply indicator (A) shows whether paper is loaded in each paper drawer.
 appears on the Paper Select screen when paper is loaded in a paper drawer.  blinks 
on the screen that appears when paper in a paper drawer has run out during printing. (See, 
“Basic Copying Method,” on p. 3‑2.)
The Paper Select Screen
A
The Screen When Paper Has Run Out
 

Original and Paper
2‑28

Setting the Speed or Print Side Priority
You can set the priority of print speed or print quality for each drawer.
1 Press  (Additional Functions).
2 
3 
① Press [▼] until [Paper Feed Method 
Switch] appears.
4 
ƒƒ
5 
①  Set the priority of copy speed or copy 
quality for each cassette.
②  Press [OK].
6  Press [Done] repeatedly until the 
Basic Features screen appears.
ƒ
„
ƒ
„
 

2‑29
Original and Paper

Loading Preprinted Paper
Use this chart when printing on preprinted paper (i.e., paper with logos).
Do not load the following types of paper into the paper drawers, as this may cause paper jams:
Paper on which color images have been copied (do not print on the reverse side either)
If you want to print on the back side of preprinted paper, place the side you want to print on:
Face up when using a paper drawer
Face down when using the stack bypass
–
–
–
–
–
 

Original and Paper
2‑30
 

Copying

3
Copying
Basic Copying Method ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙ 3-2
Paper Selection ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙ 3-4
Scan Settings ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙ 3-10
Reserved Copy ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙ 3-19
Collate Copy ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\...

Copying
3‑2

Basic Copying Method
Follow this procedure to make a copy.
Enter the Copy ModePlace Your Originals
Press  (COPY).
The COPY indicator lights up and the machine enters the copy standby mode.
You want to adjust the image quality, 
density and copy ratio:
See “Scan Settings,” on p. 3‑10.
Ô
Place the original on the platen glass 
or load it in the feeder.
For originals you can copy, see “Original Requirements,” 
on p. 2‑2.
 

3‑3
Copying

Enter the Copy QuantityStart Copying
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
Press  (Start).
You enter a wrong number:
Press  (Clear), and enter a new number.
ÔYou want to cancel copying:
Press  (Stop).
Ô