Canon Imageclass Mf5950dw User Guide

2-5
Document
	and
	Paper
	Handling
4 Align the document guides to fit the width of th\Fe 
document.
The machine is ready to copy or scan the docu\Iment.
	 		
 IMPORT\bNT
Up to 50 docu\fents can be loaded.
If more than 51 document\Is are loaded, paper jams may occur, or 
the document may not be scanned.
While scanning a docu\fent
Do not add or remove documents.
When scanning is co\fplete
Remove the document from the document de\Ilivery tray to avoid 
paper jams.
\bvoid scanning the sa\fe docu\fent \fore...

2-6
Document
	and
	Paper
	Handling
Paper Size
The	following	paper	sizes	are	supported.	
○ :	Supported								:	Not	supported
P\fper sizeP\fper Source
P\fper dr\fwer*1Multi-purpose tr\fy
A4	(8	1/4”	x	11	3/4”	(210	mm	x	297	mm))*2*3*4○ ○
B5
	(7	1/8"	x	10	1/8"	(182	mm	x	257	mm))*3○ ○
A5
	(5	7/8"	x	8	1/4"	(148	mm	x	210	mm))*3○ ○
Legal
	(8	1/2"	x	14"	(215.9	mm	x	355.6	mm))*2*3○ ○
Letter
	(8	1/2"	x	11"	(215.9	mm	x	279.4	mm))*2*3*4○ ○
Statement
	(5	1/2"	x	8	1/2"	(139.7	mm...

2-7
Document
	and
	Paper
	Handling
Paper Type
The	following	paper	types	are	supported.
	:	\bnavaila\fle
P\fper TypePrinter Driver SettingP\fper Source/P\fper C\fp\fcityP\fper Dr\fwer 1
P\fper Dr\fwer 2
(option\fl) Multi-purpose 
Tr\fy
Plain	paper*116	to	23	l\f	Bond	(60	to	89	g/m2) [Plain	Paper]
[P lain	Paper	L]*3250	sheets 500	sheets 50	sheet
Heav
y
	paper*224	to	34	l\f	Bond	(90	to	128	g/m2) [Heavy	Paper	1] 160	sheets 320	sheets 40	sheet
35
	l\f	Bond	to	60	l\f	Co

ver
	(129	to	163	g/m2) [Heavy	Paper	2]...

2-8
Document
	and
	Paper
	Handling
The	shaded	area	in	the	illustration	on	the	following	page	represents	the	printa\fle	area.
Note
	that	the	marg
 ins
	indicat
 ed
	in	the	illustra
 tion
	are	for	your	ref
 erence.
	Ac
 tual
	marg
 ins
	can	var
 y.
	
1/4"
(5 mm) 1/4"
(5 mm) 1/4"
(5 mm)
1/4"
(5 mm)3/8"
(10 mm) 3/8"
(10 mm)
3/8"
(10 mm)
3/8"
(10 mm)
* When an envelope is printed, the margin is 3/8" (10 mm) 
  on top, bottom, right, and left.
 NOTE
To enlarge the printable...

2-9
Document
	and
	Paper
	Handling
This	section	descri\fes	how	to	load	paper	in	the	paper	drawer		
and	the	multi-purpose	tra
y.
 NOTE
To set your choice of paper size or type
By default, the pape\Ir size is set to , and the type to . To use a different paper size or type, you 
need to change the defau\Ilt settings.
 “For the Paper Drawer” (→P. 2-1\b)
In the Paper Drawer
Before loading paper in \Ithe paper drawer, see “Precautions 
when Loading Paper” (→P. 2-12).
 NOTE
How to load the paper in\I the...

2-10
Document
	and
	Paper
	Handling
 IMPORT\bNT
\bdjust the paper guides to the paper width without 
space.
If the paper guides\I are loose or tight, t\Ihis may result in misfeeds or 
paper jams.
		
6 M\fke sure th\ft the p\fper st\fck does\F not exceed 
the line of the lo\fd \Flimit m\frk (A
).
* Make sure that the paper s\Itack does not exceed the line of th\Ie 
load limit mark
. If the paper stack \Iexceeds the load limi\It mark 
lines, this may result in misfeeds.
	 		
(A)(A)
(A)
7 Specify the...

2-11
Document
	and
	Paper
	Handling
3 Gently insert the p\fper st\fck into the multi-
purpose tr\fy with the print side f\fce up. 
 “Paper Loading Capacity” (→P. 2-12)
 “Paper Loading \frientation” (→P. 2-13)
	 		
When loading envelopes
(1) Fold the envelope flap.
	 		
(2) Loosen any stiff corners of the envelope and flatten curls as 
shown in the figur
e.
	 		
(3) Gently insert the envelope into the multi-purpose tray with the 
print side face up.
4 Adjust the p\fper guid\Fes to the p\fper width...

2-12
Document
	and
	Paper
	Handling
 C\bUTION
Be careful when handling \Rpaper.
Handle paper carefully not to cut your hands with the\I edges 
of the paper.
Precautions when inserting the paper drawer
Be careful not to catch your fingers.
Precautions when Loading Paper
 IMPORT\bNT
\bdjust the paper guides to the paper width without 
space.
If the paper guides\I are too loose or too tight, this may result in 
misfeeds or paper jams\I.
When using paper that has been poorly cut
If you use paper that \Ihas...

2-13
Document
	and
	Paper
	Handling
Paper Loading Orientation
 NOTE
Paper loading orientation when loading i\Rn the \fulti-
purpose tray
The paper loading or\Iientation for the multi-purpose tray is the 
same as that for the paper drawer.
When printing paper with a letterhead or logo 
(previously printed paper)
Load	the	paper	in	the	proper	orientation	as	follows.
(:	Feeding	direction)
Paper dr awer
Portr\fit l\fyout L\fndsc\fpe l\fyout
1-sided	printing*1
(with	the	printing	side	facing	down)(with	the...

2-14
Document
	and
	Paper
	Handling
Whenever	you	change	the	paper	size	and	type	loaded	in	the	
draw
er
	and	the	tra
 y,
	follo
 w
	the	proc
 edure
	in	this	section	to	
adjust	the	paper	size	and	type	settings.
 IMPORT\bNT
If the setting is d\Rifferent fro\f the size of the loaded 
paper
An error message appears\I, or printing is not performed correctly.
For the Paper Drawer
Keys to be used for this operation
OKSelect Paper/Settings
1 Press [] (Select P\fper/Settings).
2 Select  using [] or [] \fnd 
press...