Canon I Sensys Mf8580cdw User Guide

This machine generates a slight amount of ozone,  etc. during normal use. Although  sensitivity to  ozone,  etc. may  vary, this
amount is  not  harmful.  Ozone, etc. may  be more noticeable during extended use or long production runs, especially  in poorly
ventilated rooms. It is  recommended  that  the  room where the  machine operates be appropriately ventilated to  maintain a
comfortable working environment.
Do  not install in a location where  condensation  occurs
In the  following  cases, water...

0ALJ-002
Power Supply
This machine is  compatible  with voltages of 220 to  240 V, and  electrical  frequency of 50/60 Hz.
Use  only a power supply that  meets  the  specified voltage requirements. Failure to  do so may  result in a fire or electrical  shock.
Do not  use power cords  other than the  one provided, as this may  result in a fire or electrical  shock.
Do not  modify,  pull,  forcibly bend, or perform  any other act that  may  damage  the  power cord.  Do not  place heavy  objects on
the...

0ALJ-003
Handling
Immediately  unplug the  power plug from the  AC power outlet and  contact an  authorized
Canon  dealer if  the  machine makes an  unusual  noise, emits an  unusual  smell,  or emits
smoke or excessive heat. Continued  use may  result in a fire or electrical  shock.
Do not  disassemble or modify this machine. There  are  high -voltage and  high -
temperature components inside the  machine which may  result in a fire or electrical
shock.
Place the  machine where children will  not  come...

This machine is  classified  as a Class 1  Laser  Product under IEC 60825 -1:  2007, EN60825 -1:  2007. The laser beam  can be harmful
to  the  human  body. The laser beam  is  confined  in the  laser scanner  unit  by a cover, so there is  no  danger of the  laser beam
escaping  during normal machine operation. Read the  following  remarks and  instructions for  safety.Never open covers other than those indicated  in this manual.
Do not  remove  the  caution label attached to  the  cover of the  laser...

0ALJ-004
Maintenance and Inspections
Clean this machine periodically. If  dust  accumulates,  the  machine may  not  operate properly. When  cleaning, be sure  to  observe the
following. If  a problem occurs during operation, see  Troubleshooting . If  the  problem cannot  be resolved  or you feel the  machine
requires  an  inspection, see  When a Problem Cannot Be Solved .
Before cleaning, turn  OFF  the  power and  unplug the  power plug from the  AC power outlet. Failure to  do so may  result in a...

0ALJ-005
Consumables
Do not  dispose of used toner cartridges  in open flames. Also, do not  store  toner cartridges  or paper  in a location exposed  to
open flames. This may  cause  the  toner to  ignite,  and  result in burns or fire.
If  you accidentally spill or scatter toner,  carefully wipe  up  the  loose toner with a damp, soft cloth and  avoid  inhaling  any toner
dust. Do not  use a vacuum cleaner that  is  not  equipped with safety measures  to  prevent  dust  explosions  to  clean  up...

Store  in the  following  environment to  ensure  safe and  satisfactory use.
Storage  temperature range: 0  to  35°C
Storage  humidity  range:  35 to  85% RH (relative humidity/no  condensation)
Store  without opening until the  toner cartridge  is  to  be used.
When  removing the  toner cartridge  from this machine for  storage, attach the  protective  cover for  the  drum,  and  then  place
the  removed toner cartridge  into the  original  protective  bag  or wrap  it with a thick cloth.
When  storing...

0ALJ-006
Setting Up the Machine
Follow  steps 1  to  9  described below to  set up  the  machine. For more information  about  a particular  step, click on  the  link  to  go to  the
corresponding section.
Step 1Checking Supplied  Accessories
Step 2Removing Packing Materials
Step 3Preparing Toner  Cartridges
Step 4Loading Paper
Step 5Installing the Handset  (Optional) (MF8580Cdw  / MF8550Cdn / MF8280Cw Only)
Step 6Connecting the Power  Cord
Step 7Turning ON  the Power  and  Configuring  Initial...

Step 9Configuring  Initial  Settings  for Fax Functions (MF8580Cdw  / MF8550Cdn / MF8280Cw Only)
>Ý>å>Ì>Û>Ì>â>ã>â
 

0ALJ-007
Checking Supplied Accessories
If  an  item  is  missing or damaged,  contact our Canon  Authorized  Service Facilities or the  Canon  Customer  Care  Center.
The machineToner cartridge(s) Power cord
Getting StartedShortcut key  label
MF8580Cdw / MF8550Cdn  / MF8540Cdn  Only
User Software  CD -ROMMulti-lingual  User Manual CD
MF8580Cdw / MF8550Cdn  / MF8280Cw  Only
Telephone  cable Handset cable clamps
MF8580Cdw / MF8280Cw  Only
Wireless LAN Setting Guide
MF8280Cw  / MF8230Cn Only
>Þ>Ü>Ì>Û>Ì>â>ã>â