Canon I Sensys Mf8230cn User Guide

Specify a wait  time  for  connecting to  a network. Select the  setting depending on  the  network environment. Setting a Wait Time for
Connecting to a Network
0
 to  300 (sec.)
Select the  communication mode of Ethernet (half -duplex/full -duplex)  and  the  Ethernet type (10BASE-T/100BASE-TX). You  can also  v iew
the  MAC address of the  machine.
Auto Detect
Select whether  to  automatically detect or manually select the  communication mode and  the  Ethernet type. Configuring  Ethernet
Settings
Off...

0ALJ-0AX
Preferences
All  the  settings about  the  sound  volume and  display are  listed with short descriptions. Default  settings are
marked with a dagger ().
NOTE
Asterisks ( )
Settings marked with " " are  only available for  the  MF8580Cdw  / MF8550Cdn / MF8280Cw.
Settings marked with " " have different  defaults depending on  the  country or region  of purchase.
Sound Volume Control
Display Settings
Adjust volume at which the  machine beeps when a key  is  pressed on  the...

Only  When Error  OccursThree  Levels
Scanning  Done Tone
Select whether  the  machine beeps when scanning fax  documents is  complete.  You  can also  adjust the  volume.
Off
On
Three  Levels
Only  When Error  Occurs Three  Levels
Entry Tone
Select whether  the  machine beeps when a key  is  pressed on  the  operation panel.
Off
On
Invalid Entry Tone
Select whether  the  machine beeps when an  invalid settings value  is  entered, such as when a user  is  trying  to  enter a number
unavailable  for  a...

By default, the  main  copy screen is  displayed immediately  after the  machine is  turned ON or when the  Auto  Reset function is
performed. Specify the  setting to  change the  default  screen and  display the  main  screen of a different  function.Copy
Fax
Scan
Memory Media  Print
Brightness
Adjust the  brightness  of the  display to  suit the  installation  location of the  machine.Five Levels
Invert Screen Colors
Select  to  invert the  display colors.  Select  if  the  display is  hard to  view...

Message Display Time
Specify the  interval  in seconds  at which two different  messages are  alternately displayed.1  to  2
 to  5  (sec.)
Scrolling Speed
Adjust the  speed for  scrolling  the  screen by selecting from three levels.Slow
Standard
Fast
Cursor Movement
Configure how the  cursor moves after a character is  entered  on  the  screen. Select  to  automatically move the  cursor to  th e
right of the  entered  character after approximately  1  second.  Select  to  manually move the  cursor to...

Remote UI  Language
Select the  display language used for  the  Remote  UI screens.English
, French, Spanish,  German, Italian,  Dutch,  Finnish, Portuguese, Norwegian, Swedish, Danish, Czech, Hungarian,  Russian,
Turkish, Polish
*2
    Select a language 
>à>ä>â>Ì>Û>Ì>â>ã>â
 

0ALJ-0AY
Timer Settings
All  the  settings about  the  timer are  listed with short descriptions. Default  settings are  marked with a dagger ().
NOTE
Asterisks ( )
Settings marked with " " cannot  be imported or exported via  the  Remote  UI.
Settings marked with " " may  be unavailable  or have different  defaults depending on  the  country or region  of purchase.
Settings marked with " " are  only available for  the  MF8540Cdn / MF8230Cn.
Date/Time Settings
Auto  Reset  Time...

Current Date/Time Settings
Set the  current  date and  time. Use  / to  move the  cursor, and  / to  specify  the  date and  time  or switch  between
/.
IMPORTANT
Set  before setting the  current  date and  time. If  the   setting is  changed, the  current  date and  time
are  also  changed accordingly.
NOTE
The current  date and  time  cannot  be changed for  1  hour after daylight  saving  time  is  in effect.
Time Zone
Select the  time  zone. If  the  time  zone setting is  changed, the  values set in...

Start: Month,  Week, Day
End: Month,  Week, Day
If  a key  is  not  pressed for  a specified period of time, the  screen and  the  settings are  initialized to  display the  default  scre en (Auto
Reset).  Specify the  interval  at which the  Auto  Reset is  performed. Select  to  disable the  Auto  Reset function. The Auto  Rese t is  not
performed in the  following  cases:
The setting menu is  displayed.
The machine is  processing data, such as when printing documents or sending or receiving faxes.
An...

the  setting menu is  displayed.  We recommend  using the  factory default  settings to  save  the  most power. Entering Sleep  Mode
MF8580Cdw / MF8550Cdn / MF8540Cdn 10
 to  60 (min.)
MF8280Cw / MF8230Cn 20
 to  60 (min.)
If  a key  has not  been pressed for  a specified period of time  after the  screen below is  displayed (the machine is  set online  for  scanning),
the  machine automatically becomes offline. Specify the  time  period at which the  machine becomes offline. You  can also  set the  m...