Canon Hf R400 Instruction Manual

Additional Information Š 171
6/4  List of Messages for Wi-Fi Functions
Refer also to the instruction manual  of your wireless router and other 
devices you will use.
The compact power adapter was disconnected.   Could not safely remove the external hard 
drive.
- While the camcorder was connected to an external hard drive, the camcorder’s compact  power adapter was disconnected and the connection was ended. Check whether data in the 
hard drive was corrupted.
Another user is already controlling the...

172 Š Additional Information
Unable to complete WPS.- Turn off the camcorder and wireless router. After a short while, turn them on again and try again. If the problem persists, perform setup using the [Search for Access Points] option 
(A 137).
Unable to connect - Cordless phones, microwave ovens, refrigerator s and other appliances may interfere with the 
wireless signal. Try using the camcorder in a location farther away from such appliances.
Unable to obtain an IP address - If you are not using a...

Additional Information Š 173
List of Messages for Web Services
Wi-Fi error   Incorrect encryption method- Make sure the camcorder and access point are using the same authentication/encryption method.
- If the access point is using MAC address filtering, enter the camcorder’s MAC address in the  access point’s configuration screen.
Wireless communication is not working correctly - Cordless phones, microwave ovens, refrigerator s and other appliances may interfere with the 
wireless signal. Try using the...

174 Š Additional Information
Try again- An error occurred when connecting to the CANON iMAGE GATEWAY server or the server is temporarily down. End the Wi-Fi connection and try again.
COPY  

Additional Information Š 175
Do ’s  and  D on ’tsHandling Precautions
Camcorder
Be sure to observe the following precautions to ensure maximum per-
formance. 
•Save your recordings periodically.  Make sure to transfer your record-
ings to an external device such as a computer or digital video recorder 
( A 107) and save them on a regular basis. This will protect your impor-
tant recordings in case of damage and create more free space on the 
memory. Canon shall not be liable for any data loss. 
• Do not...

176 Š Additional Information 
• Do not use or store the camcorder in dusty or sandy places. The cam-corder is not waterproof – avoid also water, mud or salt. If any of the 
above should get into the camcorder it may damage the camcorder 
and/or the lens.
• Be careful of heat generated by lighting equipment.
• Do not disassemble the camcorder. If the camcorder does not function  properly, consult qualified service personnel.
• Handle the camcorder with care. Do not subject the camcorder to  shocks or...

Additional Information Š 177
• Dirty terminals may cause a poor contact between the battery pack and 
the camcorder. Wipe the terminals with a soft cloth.
Long-term storage 
• Store battery packs in a dry place at temperatures no higher than 30°C 
(86°F). 
• To extend the battery life of the battery pack, discharge it completely 
before storing it.
• Charge and discharge all your battery packs fully at least once a year.
Remaining battery time
When you are using a battery pack that is compatible with...

178 Š Additional Information 
• Secure Digital (SD) memory cards have a physical switch to prevent writ-
ing on the card so as to avoid the 
accidental erasure of the card’s con-
tent. To write-protect the memory card 
set the switch to the LOCK position.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in rechargeable lithium battery to keep the 
date/time and other settings. The bu ilt-in lithium battery is recharged 
while you use the camcorder; however, it will discharge completely if...

Additional Information Š 179
Maintenance/Others
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the camcorder body. Never use chemically 
treated cloths or volatile so lvents such as paint thinner.
Lens
• If the lens surface is dirty, autofocus may not work properly.
• Remove any dust or dirt particles using a non-aerosol type blower  brush.
• Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use  tissue paper.
LCD Touch Screen
• Clean the LCD touch screen using a clean, soft...

180 Š Additional Information 
• Remove the memory card and battery pack. Then, place the camcorder in an airtight plastic bag and let it adjust gradually to temperature 
changes before removing it from the bag.
When condensation is detected 
The precise time required for water droplets to evaporate will vary 
depending on the location and weather conditions. As a general rule, wait 
for 2 hours before resuming use of the camcorder.
Using the Camcorder Abroad
Power Sources
You can use the compact power...