Canon Hf R400 Instruction Manual
Here you can view all the pages of manual Canon Hf R400 Instruction Manual. The Canon manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 161
Additional Information Š 161 Indicators and Onscreen Displays lights up in red. - Battery pack is exhausted. Repl ace or charge the battery pack. appears on the screen. - The camcorder cannot communicate with the batte ry pack attached so the remaining battery charge cannot be displayed. lights up in red. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card if the display does not change back to normal. - The memory card is full....
Page 162
162 Š Additional Information Abnormal characters appear on the screen and the camcorder does not operate properly.- Disconnect the power source and reconnect it a fter a short time. If the problem still persists, remove the battery pack and disconnect all other power sources from the camcorder. Then, reset all the camcorder’s settings to default values ( A151). Video noise appears on screen. - Keep a distance between the camcorder and devices that emit strong electromagnetic fields (plasma TVs,...
Page 163
Additional Information Š 163 Connections with External Devices Video noise appears on the TV screen.- When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. Playback looks fine on the camcorder but there is no image on the TV screen. - The video input on the TV is not set to the video terminal to which you connected the cam-corder. Select the correct video input. The camcorder is connected using the supplied...
Page 164
164 Š Additional Information - Wi-Fi networks with a stealth function that do not broadcast their network name (SSID) will not be detected by the camcorder during the Wi-Fi network setup. Perform the setup manu- ally ( A140) or turn off the stealth function of the wireless router. Wireless playback on a computer or similar device is not smooth. - Playback may not be smooth depending on the wireless router’s settings and capability. - Connect the computer to the access point using a LAN cable. - Remove...
Page 165
![Page 165
Additional Information Š 165
6/4 Built-in memory is full
- The built-in memory is full ([& End] appears on the screen). Delete some recordings (A 56, 58) to free some space. Alternatively, save your recordings ( A111) and initialize
the built-in memory ( A33).
6 /4 Built-in memory writing error Attempt to recover the data?
- This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writing to the built-in memory. Select...](http://img.usermanuals.tech/thumb/14/102390/w300_hf-r400-instruction-manual-1511194021_d-164.png "Page 165
Additional Information Š 165
6/4 Built-in memory is full
- The built-in memory is full ([& End] appears on the screen). Delete some recordings (A 56, 58) to free some space. Alternatively, save your recordings ( A111) and initialize
the built-in memory ( A33).
6 /4 Built-in memory writing error Attempt to recover the data?
- This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writing to the built-in memory. Select...")
Additional Information Š 165 6/4 Built-in memory is full - The built-in memory is full ([& End] appears on the screen). Delete some recordings (A 56, 58) to free some space. Alternatively, save your recordings ( A111) and initialize the built-in memory ( A33). 6 /4 Built-in memory writing error Attempt to recover the data? - This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writing to the built-in memory. Select...
Page 166
![Page 166
166 Š Additional Information
6/4 Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings ( A111) and initialize the
built-in memory using the [Complete Initialization] option ( A33). If the problem persists,
contact a Canon Service Center.
Cannot play back Check the memory card - There is a problem with the memory card. Save your recordings ( A111) and initialize the
memory card using the [Complete Initialization] option (A 33). If...](http://img.usermanuals.tech/thumb/14/102390/w300_hf-r400-instruction-manual-1511194021_d-165.png "Page 166
166 Š Additional Information
6/4 Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings ( A111) and initialize the
built-in memory using the [Complete Initialization] option ( A33). If the problem persists,
contact a Canon Service Center.
Cannot play back Check the memory card - There is a problem with the memory card. Save your recordings ( A111) and initialize the
memory card using the [Complete Initialization] option (A 33). If...")
166 Š Additional Information 6/4 Cannot play back Cannot access the built-in memory - There is a problem with the built-in memory. Save your recordings ( A111) and initialize the built-in memory using the [Complete Initialization] option ( A33). If the problem persists, contact a Canon Service Center. Cannot play back Check the memory card - There is a problem with the memory card. Save your recordings ( A111) and initialize the memory card using the [Complete Initialization] option (A 33). If...
Page 167
![Page 167
Additional Information Š 167
Cannot record movies on this memory card Initialize only using the camcorder- The memory card in the camcorder was initia lized using a computer. Initialize the memory
card with this camcorder ( A33).
Cannot save the canvas - Cannot save your [Pens and Stamps] drawings on the memory. Save your recordings (A 111) and initialize the memory (A 33).
Cannot trim the scene - You cannot trim scenes that were recorded using another device or copied to an SDXC mem- ory card....](http://img.usermanuals.tech/thumb/14/102390/w300_hf-r400-instruction-manual-1511194021_d-166.png "Page 167
Additional Information Š 167
Cannot record movies on this memory card Initialize only using the camcorder- The memory card in the camcorder was initia lized using a computer. Initialize the memory
card with this camcorder ( A33).
Cannot save the canvas - Cannot save your [Pens and Stamps] drawings on the memory. Save your recordings (A 111) and initialize the memory (A 33).
Cannot trim the scene - You cannot trim scenes that were recorded using another device or copied to an SDXC mem- ory card....")
Additional Information Š 167 Cannot record movies on this memory card Initialize only using the camcorder- The memory card in the camcorder was initia lized using a computer. Initialize the memory card with this camcorder ( A33). Cannot save the canvas - Cannot save your [Pens and Stamps] drawings on the memory. Save your recordings (A 111) and initialize the memory (A 33). Cannot trim the scene - You cannot trim scenes that were recorded using another device or copied to an SDXC mem- ory card....
Page 168
168 Š Additional Information Do not disconnect the power source. Do not disconnect the USB cable unless you first use the computer to safely end the connection.- When the camcorder is in mode and is connected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder. Use the computer’s Safely Remove Hardware function to end the connection and...
Page 169
![Page 169
Additional Information Š 169
Memory card writing error Attempt to recover the data?- This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writ ing to the memory. Select [Recover] to try to
recover the recordings. If you inserted a memory card that contains scenes recorded using
another device, we recommend that you select [No].
Need to recover files from the memory card. Change the position of the LOCK switch on the...](http://img.usermanuals.tech/thumb/14/102390/w300_hf-r400-instruction-manual-1511194021_d-168.png "Page 169
Additional Information Š 169
Memory card writing error Attempt to recover the data?- This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writ ing to the memory. Select [Recover] to try to
recover the recordings. If you inserted a memory card that contains scenes recorded using
another device, we recommend that you select [No].
Need to recover files from the memory card. Change the position of the LOCK switch on the...")
Additional Information Š 169 Memory card writing error Attempt to recover the data?- This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writ ing to the memory. Select [Recover] to try to recover the recordings. If you inserted a memory card that contains scenes recorded using another device, we recommend that you select [No]. Need to recover files from the memory card. Change the position of the LOCK switch on the...
Page 170
170 Š Additional Information 6/4 List of Messages for Connecting to an External Hard Drive Some scenes could not be deleted - Movies that were protected/edited with other devices cannot be deleted with this camcorder. Some scenes were recorded using another device and cannot be copied. - Scenes that were not recorded with this camcorder cannot be copied to the memory card. Task in progress. Do not disconnect the power source. - The camcorder is updating the memory. Wait until the operation ends and...