Canon Hf R400 Instruction Manual

Wi-Fi Functions Š 141
In step 2, if you selected [OPEN NONE], this step is not necessary.
4 Touch [Automatic] or [Manual] to select how to obtain the IP  address.
If you selected [Automatic], proceed to step 11.
5 For both the IP address and subnet mask areas, touch [0.0.0.0]  and then touch [ Í]/[Î ] to change the value.
Touch and next field and change the value, as necessary.
6 Touch [OK] and then touch [Next].
7 In the default gateway area, touch [0.0.0.0] and then touch [ Í]/
[ Î ] to change the...

142 Š Wi-Fi Functions
1 From any movie index screen, open the setting selection screen.
To view the smartphone’s connection settings
2 Touch [Smartphone Connection Settings].The camcorder’s SSID and password will appear.
3 If necessary, touch [Edit]  > [OK]  > [OK] to change the settings 
and then perform the procedure in 
Manual Setup ( A 140).
The next time you make a wireless connection, you will need to change 
the Wi-Fi settings in the smartphone.
To view the access point’s connection settings
2...

Wi-Fi Functions Š 143
Glossary
This is a glossary of some of the basic terms used frequently in this 
chapter. The documentation for your wireless router may also con-
tain a glossary you can refer to.
Access Point
A wireless access point (WAP) is a device that allows wireless 
devices, like your camcorder, to connect to a wired network (includ-
ing to the Internet) using the Wi-Fi standard. In most cases, this will 
be your wireless router.
IP Address
Exclusive number assigned to each device connected...

144 Š Additional Information
Additional Information
This chapter contains troubleshooting advice, screen mes-
sages, handling and maintenance tips, and other information.
Appendix: Menu Options Lists
The functions that are available depend on the shooting mode. In the 
following tables, available functions are indicated by  z and functions 
not available are indicated by –. On the camcorder’s screen, menu 
items not available appear grayed out. For details about how to select 
an item, refer to  Using...

Additional Information Š 145
[ZOOM] Zoom controls, [START]/[STOP] control zzzzz
48
[ W ] (tele macro): Toggle on or 
of
f–– zzz 85
[ R Faders] [
jOff],  [T Fade Trigger], 
[ V Wipe],
[Black Screen]
, [White Screen] z
–zzz 78
[Zoom Type] [ Optical]
, 
[ Advanced],
[Digital] ––
zzz 48
[ È Powered 
IS] [ON], [OFF]
––
zzz 76
[ z  Pre REC] [ON], [OFF]
z –zzz 82
[ < Focus] [ D] (manual focus): 
Toggle on or off
, Touch AF frame ––
zzz 80
[ y Exposure] [ n] (manual exposure): Toggle 
on or off
, Touch AE frame...

146 Š Additional Information
[Edit] Panel -   Mode
[Edit] Panel -   Mode
[ Other Settings] Menus
p Camera Setup
Control ButtonIndex ScreenPlayback PauseA
6 /4
From the built-in memory:
[Copy ( &
`)]
, 
[Select],
[All Scenes] – 107
6 /4
From the built-in memory:
[Convert to MP4 
( &
`)] [Select]
–110
[Delete]
, 
[Select],
[All Scenes] [This Scene] 56
[Divide] – z99
[Trim] – z100
Control ButtonIndex ScreenSingle Photo ViewA
6/4
From the built-in memory:
[Copy ( &
`)]
, 
[Select], [All Photos] z
108...

Additional Information Š 147
[Zoom Position at Startup]:  Allows you to choose the position of the zoom 
when you turn on the camcorder.
[Full Wide Angle]: The zoom position will be at full wide angle.
[Last Used Position]: The zoom position  w ill be at the same position it was 
the last time you used zoom.
• When this function is set to [Full Wide Angle] and you manually adjust  the focus, the focus will be lost and autofocus will be activated the next 
time you turn on the camcorder.
[Focus...

148 Š Additional Information
s /   Playback Setup
 Display Setup
[Onscreen Markers]: You can display a grid or a horizontal line at the cen-
ter of the screen. Use the markers as a reference to make sure your sub-
ject is framed correctly (vertically and/or horizontally).
• Using the onscreen markers will not affect the recordings.
[Display Date/Time]: Select whether to display the date and time during 
playback. For MP4 movies, only the date will be displayed.
Menu itemSetting optionsyA
[Select Music]...

Additional Information Š 149
[Output Onscreen Displays]: When set to [iOn], the camcorder’s 
onscreen displays will appear also on the screen of a TV or monitor con-
nected to the camcorder.
• This function is not available when the shooting mode is set to  .
[LCD Brightness]: Adjusts the brightness of the LCD screen.
• Changing the brightness of the LCD screen does not affect the bright- ness of your recordings or the brightness of the playback image on a 
TV.
[LCD Backlight]: Sets the screen to one of...

150 Š Additional Information
• This function is not available when the camcorder is connected to an HDTV using the supplied High Speed HDMI cable.
q  System Setup
Menu itemSetting optionsvyA
[Language  ] [ ], [Dansk], [Deutsch], [ ], 
[English], [Español], [Français], [Italiano], 
[Magyar], [Melayu], [Nederlands], 
[Norsk], [Polski], [Português], [ ],  
[Suomi], [Svenska], [Türkçe], [ ], 
[ ], [ ], [ ], 
[ ], [ ], [ ], 
[], [ ] zzz
31
[Time Zone/DST] [ ] (home time zone) or [ #] (travel 
time zone): [New...