Canon Faxphone L75 Laser Fax Printer Users Guide

							Chapter 5 Print Media Handling5-3
Print Media
Handling
Printable Areas
3Paper
The shaded area shows the printable area of letter-size paper.
3
Envelope
The shaded area shows the printable area of U.S. Commercial No. 10-size envelopes.
U.S. Commercial 
No. 10
MAX. 0.39
(MAX. 10 mm)
MAX. 0.16
(MAX. 4 mm)
MAX. 0.16
(MAX. 4 mm)MAX. 0.16
(MAX. 4 mm)
FEED 
DIRECTION
MAX. 0.16
(MAX. 4 mm)
MAX. 0.39
(MAX. 10 mm)
Fax: MAX. 0.16
(MAX. 4 mm)
Copy: MAX. 0.24
(MAX. 6 mm)Fax: MAX. 0.2
(MAX. 5 mm)
Copy: MAX. 0.28
(MAX. 7 mm)
LetterFEED 
DIRECTION 
						

							5-4Print Media Handling Chapter 5
Selecting and Loading Print Media
Paper
3Selecting Paper
•To prevent paper jams in the multi-purpose tray, do not use any of the following:
–Wrinkled or creased paper – Curled or rolled paper
–Coated paper – Torn paper
–Damp paper – Onion skin or very thin paper
•The following types of paper do not print well:
–Highly textured paper – Very smooth paper
–Shiny paper
•Make sure the paper is free from dust, lint, and oil stains.
•Be sure to test paper before purchasing large quantities.
•Store all paper wrapped and on a flat surface until ready to use. Keep opened packs
in their original packaging, in a cool, dry location.
•Store paper at 64.4°–75.2°F (18°–24°C), 40%–60% relative humidity.
3Loading Paper
For instructions on loading paper in the multi-purpose tray, see p. 2-16.
Envelopes
3Selecting Envelopes
•Use standard envelopes with diagonal seams and flaps.
•To prevent jams in the multi-purpose tray, do not use the following:
–Envelopes with windows, holes, perforations, cutouts, and double flaps
–Envelopes made with special coated paper or deeply embossed paper
–Envelopes with peel-off sealing strips
–Envelopes with letters enclosed
•You may be able to load other size envelopes than those listed on the previous page.
However, Canon cannot guarantee consistent performance on these.
n
When printing on envelopes, be sure to use face-up delivery (1p.5-7). 
						

							Chapter 5 Print Media Handling5-5
Print Media
Handling
3Loading Envelopes
Follow this procedure to load up to 7 envelopes in the multi-purpose tray:
1Prepare the envelopes.
❚Arrange the stack of envelopes on a 
firm, clean surface, and press down
firmly on the edges to make the folds
crisp.
•Press all the way around the envelopes
to remove any curls and expel air from
inside the envelopes. Also, press firmly
on the area that corresponds to the
edges of the back flap.
❚Remove any curling from the 
envelopes by holding the edges
diagonally and bending them gently.
❚Run a pen or other rounded object 
along the back flaps to flatten them.
•The flaps should not bulge more than 
0.2 in. (5 mm).
2Remove the multi-purpose tray cover
from the machine.
FLAP 
						

							5-6Print Media Handling Chapter 5
3Insert the stack into the multi-purpose
tray 
q(print side facing you), then
adjust the paper guides to the width of
the stack 
w.
4Replace the multi-purpose tray cover.
•Be sure to replace this cover to prevent
dust accumulating inside the machine.
5Adjust the paper delivery selector to 
U(face-up delivery). For details, 
see p. 5-7.
The machine is now ready to print.
Transparencies
3Selecting Transparencies
Use only special laser printer transparencies.
n
•When printing on transparencies, be sure to use face-up delivery (1p.5-7).
•To prevent the transparency from curling, remove it as soon as it exits the machine and
place it on a flat surface to cool.
3Loading Transparencies
Load transparencies in the multi-purpose tray as for paper (1p.2-16). However, load
only one transparency at a time.
1
2
2 
						

							Chapter 5 Print Media Handling5-7
Print Media
Handling
Selecting Face-Up or Face-Down Delivery

Paper Path
Understanding how paper feeds through the machine will help you determine which
paper delivery slot is appropriate for the print media and task you are performing.
First, the paper travels to the cartridge where a laser beam “draws” the print image on
the drum, which in turn applies toner to the paper. The paper travels to the fixing
assembly where the toner is “fixed” (fused) to the paper. It then exits the machine
through the face-up delivery slot (front of the machine) or the face-down delivery slot
(top of the machine).

Before Setting the Paper Delivery Selector
Before selecting paper delivery, be sure to take note of the following:
• Always set the paper delivery selector before printing.
• Changing paper delivery while the machine is printing will cause problems. Wait for
the printout to exit the machine completely before changing paper delivery.
• The face-down delivery slot can hold up to approximately 50 sheets of paper. To
prevent paper jams, remove paper from this slot before 50 sheets print out.
• Make sure there is enough room for the paper to exit from the face-up delivery slot.
Remove each sheet as it is delivered from this slot.
• Never pull the paper as it comes out of the machine.
FACE-DOWN 
DELIVERY
FACE-UP DELIVERY
PAPER 
DELIVERY 
SELECTOR 
						

							5-8Print Media Handling Chapter 5 •Select face-down delivery when:
–printing on paper.
–you want the printed pages to stack in the correct page order.
–you are printing a small number of pages.
–you only receive a small number of faxes, and of few pages.
–you will be faxing a document you have printed from your machine.
•Select face-up delivery when:
–printing on envelopes.
–printing on transparencies.
–you are expecting to print or receive a large number of pages, or plan to be away and
want to receive faxes during your absence. If this is the case, place your machine
near the edge of a table so that the pages can fall away from your machine without
blocking the face-up delivery slot. Place a container below your machine to collect the
pages.
■Setting the Paper Delivery Selector
Select face-up or face-down delivery with the paper delivery selector.
c
When using face-up delivery, you must remove each sheet as it is delivered.
Failure to do this may cause jams in the face-up delivery slot and result in damage
to your machine.
FACE-DOWN 
DELIVERY (
D) FACE-UP
DELIVERY (
U) 
						

							Chapter 5 Print Media Handling5-9
Print Media
Handling
Changing the Paper Size Setting
The multi-purpose tray is factory-set for loading letter-size paper. If you want to load a
different paper size (1
p.5-2), follow this procedure to change the paper size setting:
1Open the one-touch speed dialing panel.
2Press Data Registration.
3Press Set.
4Use ∂or ¨to select PRINTER
SETTINGS
.
5Press Set.
6Use ∂or ¨to select PAPER SIZE.
7Press Set.
8Use ∂or ¨to select the paper size
you want for the multi-purpose tray.
•You can select from the following:
–
LT R
–LGL
–CUSTOM
–A4
•For details on the paper sizes above,
see p. 5-2.
■If you selected LT R, LGL, or A4in step 8:
9Press Set.
10Press Stopto return to standby mode.
■If you selected CUSTOMin step 8:
9Press Set.CUSTOM1/LONG
12/27       FaxTel  
ECONOMY PRT
LT R
PAPER SIZE
RX REDUCTION
PRINTER SETTINGS
USER SETTINGS
DATA REGSTRATION 
						

							5-10Print Media Handling Chapter 5
10Use ∂or ¨to select the custom
paper size setting.
•You can select from the following:
–
CUSTOM1/LONG
–CUSTOM2/SHORT
•For details on the paper sizes above, 
see p. 5-2.
11Press Set.
12Press Stopto return to standby mode.12/27       FaxTel  
ECONOMY PRT 
						

							Chapter 5 Print Media Handling5-11
Print Media
Handling
Adjusting the Toner Saver Setting
By enabling the toner saver setting, you can reduce toner consumption of the cartridge
by approximately 30% to 40%. This will extend the cartridge life.
n
By enabling this setting, print quality will be reduced. For highest print quality, disable this
setting.
Follow this procedure to enable or disable the toner saver setting:
1Open the one-touch speed dialing panel.
2Press Data Registration.
3Press Set.
4Use ∂or ¨to select PRINTER
SETTINGS
.
5Press Set.
6Use ∂or ¨to select ECONOMY PRT.
7Press Set.
8Use ∂or ¨to select the setting you
want.
•You can select from the following:
–
ON(Enable toner saving)
–
OFF(Disable toner saving)
9Press Set.
10Press Stopto return to standby mode.12/27       FaxTel  
TONER SUPPLY LOW
OFF
ECONOMY PRT
RX REDUCTION
PRINTER SETTINGS
USER SETTINGS
DATA REGSTRATION 
						

							5-12Print Media Handling Chapter 5