Canon Fax L380 User Guide

Menu Descriptions15-7
The Menu System
15
4.DENSITY CONTROL Adjusts the scanning density.1.LIGHT Sets for dark documents. 3 to 9 ( 7)
2.STANDARD Sets for standard documents. 2 to 8 ( 5)
3.DARK Sets for light documents. 1 to 7 ( 3)
5.OFFHOOK ALARM Enables/disables the offhook alarm that alerts  you when the handset is not in the handset 
cradle.
ON After reception, the offhook alarm sounds when 
the handset is left off the hook.
OFF No offhook alarm.
6.R-KEY SETTING Sets how the fax connects to PBX. If...

Menu Descriptions15-8
The Menu System
15
OUTPUT YES Prints a report every time you send a document.
REPORT WITH TX IMAGE Enables/disables  printing of the first page of the 
fax under the report.
ON Prints the first page.
OFF No first page is printed.
2.RX REPORT Enables/disables automatic printing of a  reception report.
OUTPUT NO No report is printed.
PRINT ERROR ONLY Prints a report only when a reception error  occurs.
OUTPUT YES Prints a report every time you receive a  document.
3.ACTIVITY REPORT...

Menu Descriptions15-9
The Menu System
15
3.AUTO REDIAL Sets whether to perform automatic redial when the other line is busy or no answer.
ON Customizes the redial operation.
1.REDIAL TIMES Sets the number of retries. 01 to 10TIMES (02 TIMES)
2.REDIAL INTERVAL Sets period of time between redialings. 02 to 99MIN. (02 MIN.)
OFF After the first attempt at dialing fails, redialing is  not attempted.
4.TIME OUT Enables/disables automatic scanning of  documents after the fax number is entered by 
using speed...

Menu Descriptions15-10
The Menu System
15
2.F/T RING TIME Sets the length of time the machine rings to 
alert you of an incoming call.
010 to 060SEC ( 022 SEC)
3.F/T SWITCH ACTION Selects the action taken after the F/T RING  TIME expires.
RECEIVE The machine switches to the fax receive mode 
automatically at this point and starts to receive 
the document.
DISCONNECT The machine disconnects the call.
3.INCOMING RING Sets whether the machine rings when it  receives a call when the machine is set to...

Menu Descriptions15-11
The Menu System
15
5.REMOTE RX Enables/disables remote receiving.ON The machine enables remote receiving.
REMOTE RX ID You can dial c ode on the remote extension to 
start receiving a document.
A combination of two characters using [0] to [9], 
[ ] and [#] (25) is possible.
OFF The machine disables remote receiving.
5.PRINTER SETTINGS Sets the print functions.
1.RX REDUCTION Receives images at a reduced size.ON Image reduction is turned on.
1.RX REDUCTION AUTO SELECTION: Reducing...

Menu Descriptions15-12
The Menu System
15
6.POLLING BOX Sets the functions of SETUP FILE, CHANGE DATA and DELETE FILE.
1.SETUP FILE Registers a polling box. 1.FILE NAME Enters a name for poling box  (max. 24 characters, including spaces).
2.PASSWORD Enters a password to protect the polling box  settings (max. 7 characters).
3.ERASE AFTER TX Tells the machine how to handle a document  after it is polled and sent.
ON, OFF
2.CHANGE DATA Changes the settings of the polling box. 1.FILE NAME Changes the file...

Menu Descriptions15-13
The Menu System
15
* This setting is only available for some countries.
5. ADD. REGISTRATION
2.LOCK PHONE Sets the LOCK PHONE functions.OFF Outgoing voice call is operational.
ON Outgoing voice call is not operational.
3.COUNTRY SELECT* Selects the c ountry where you are using your 
machine.
UK/GERMANY/FRANCE/ITALY/SPAIN/
HOLLAND/DENMARK/NORWAY/SWEDEN/
FINLAND/AUSTRIA/BELGIUM/
SWITZERLAND/PORTUGAL/IRELAND/
GREECE/LUXEMBOURG/HUNGARY/CZECH/
RUSSIA/SLOVENIA/SOUTH AFRICA/
OTHERS
(The...

Menu Descriptions15-14
The Menu System
15
6. PRINTER SETTINGS
3.GROUP DIAL Registers the information on Group Dialing.Up to 131 groups can be registered.
1.TEL NUMBER ENTRY Registers the other party’s telephone numbers  by specifying the One-Touch Speed Dial 
buttons or Coded Speed Dialing codes.
2.NAME Registers the group’s name  (max. 16 characters, including spaces).
(The factory default setting is in  bold face.)
NameDescriptions
1.PRESET PRINT QTY Sets the standard number of pages of the 
printer...

Menu Descriptions15-15
The Menu System
15
7. TIMER SETTINGS
NameDescriptions
1.DATE/TIME SETTING Enter the current date and time.
2.AUTO CLEAR Sets the auto clear function. If the machine remains idle for a certain period of time, the 
display returns to the standby mode.
ON The auto clear function is turned on.
1MIN. to 9MIN. (2MIN.)
OFF The auto clear function is turned off.
3.ENERGY SAVER Sets the energy saver mode.
ON The energy saver mode is set.
03MIN. to 30MIN. (05MIN.)
OFF The energy saver mode...

Menu Descriptions15-16
The Menu System
15
8. PRINT LISTS
NameDescriptions
1.USER DATA Prints out a list of items set or registered in the Menu.
2.SPEED DIAL LIST Prints the list of the fax/telephone numbers  registered for One-Touch Speed Dial buttons, 
Coded Speed Dialing codes or group dialing.
1.1-TOUCH LIST Prints the One-touch List. 1.NO SORT The printout of the list is not sorted.
2.SORT The printout of the list is sorted.
2.CODED DIAL LIST Prints the Coded Dial List. 1.NO SORT The printout of the...