Canon F792sga Owners Manual

							49
61
    Calculate the Inner Product of Two VectorsExample: Calculate the inner product of Vector A and Vector B. As Vector A = (4,5,-6) and Vector B = (-7,8,9).
    Obtain the Scalar Product of a VectorEach position in the vector is multiplied by a single value, resulting in 
a vector of the same size.      
   s x VctA(a,b) = VctB(axs, bxs) 
Example: To Multiply Vector C = (4,5,-6) by 5 
Display
Key in operation
Display
Key in operationApps
Apps
Apps
Apps
Apps
Apps
Apps 
						

							62
50
    Determine the Absolute Value of a Vector
Example 1: Determine the absolute value of the Vector C. When  
                     Vector C = (4,5,-6) and is already created in the calculator. 
    Calculate the Outer Product of Two Vectors
Example: Calculate the outer product of Vector A and Vector B. As Vector A = (4,5,-6) and Vector B = (-7,8,9).
!  An error occurs if you try to obtain an inner or outer product of two  vectors whose dimensions are different from each other. 
Abs
Display
Key in operation
Display
Key in operation
Apps
Apps
Apps
Apps
Apps
Apps 
						

							63
51
Example 2: Based on Vector A=(-1, 0, 1) and Vector B=(1, 2, 0), determine the size of the angle    (angle unit: Deg) and a 
unit 1 vector perpendicular to both A and B.
                          cos   =          , whereas   = cos 
-1 
            Unit 1 vector perpendicular to both A and B= 
  < Result:                   =(0.666666666, -0.333333333, 0.666666666) >
Display
Key in operation
AbsAbs
Abs
Apps
Apps
AppsAppsApps
AppsApps
AppsApps
AppsApps 
						

							64
52
  Inequality Calculations
 
  Press                       (INEQ) to enter Inequality mode. Press        ,                           or         to select an inequality type.
     
  
  
  On the menu, press        ,        ,        or        to select the inequality  symbol type and orientation.
  Use the Coefficient Editor that appears to input coefficient values.
  To solve x
2 +2x -3 < 0, for example, input the coefficients a = 1, b 
= 2, c = -3, by pressing 1         2                3        .
Example: x2 + 2x -3 ≥ 0  
Display
Key in operation
  The following operations are not supported by the Coefficient 
Editor:        ,                    ,                     ,       ,     \
  and       also 
cannot be input with the Coefficient Editor.
  Press         to return the Coefficient Editor while the solutions are  displayed.
  Values cannot be converted to engineering notation on the  solution screen. 
						

							65
53
  Inequality Calculations
 
  Press                        (INEQ) to enter Inequality mode. Press        ,              
             or         to select an inequality type.
      
  
  
  On the menu, press        ,        ,        or        to select the inequality  symbol type and orientation.
  Use the Coefficient Editor that appears to input coefficient values.
  To solve x
2 +2x -3 < 0, for example, input the coefficients a = 1, b 
= 2, c = -3, by pressing 1         2                3        .
    Special Solution Display   “All” appears on the solution screen when the solution of an
   inequality is all numbers. 
Example: x2 ≥ 0   (INEQ mode 1: Quad)  
Display
Key in operation
  “No-Solution” appears on the solution screen when no solution
   exists for an inequality (such as x2 < 0)
Example: x2 + 3 ≤ 0  
Apps
All
Display
Key in operationApps
No-Solution 
						

							66
54
Example: To calculate the ratio 2: 3 = 5: X
 The following operations are not supported by the Coefficient 
Editor.         ,                    ,                     ,       ,       ,       and 
  also cannot be input with the Coefficient Editor.
  [Math ERROR] will occur if a calculation is performed while 0 is  input as a coefficient.
Display
Key in operation
 
On the Coefficient Editor screen, input up to 10 digits for each of 
the required values (a, b, c, d).
 •  To solve 3:8=X:12 for X, for example, press         in step 1, and  then input the following for the coefficients (a=3,b=8,d=12): 
  3         8         12        .
MATHEMATICS MODE:
 Ratio Calculation   Press                      (RATIO) to enter the RATIO mode. Press        
  or         to select the ratio type. 
						

							67
55
Start? Input the lower limit of X (Default =1).
End?  Input the upper limit of X (Default = 5).
  *End value must be greater than the start value.
Step?  Input the increment step (Default =1).
  Input f(x) function to generate the function table for x & f(x).
 Steps to Generate a Number Table
  1.  Press               to enter the Table function calculation.
  2.  Function Input screen
    •  Input function with X variable (              ) to generate the  Function Table Result.
    •  All other variables (A, B, C, D, Y) and independent  memory (M) act as the value.
    •  Pol, Rec, Q, S,     …r functions cannot be used in the  Function Input screen.
  • 
The Function Table Calculation will change the X-variable.  3.  Input the start, end, & step information
    •  Input the value, press         to confirm on the following  screens
    •  The input expression and display result value in  following screens are in Line mode status
  •  There is a maximum of 30 x-values in the function table 
generation. “Insufficient Error” will be shown if the start, 
end, step value combination is more than 30 x-values.
Function (x, y) Table Calculation
You should input:-Display screen
  In the Function Table Result screen, you cannot edit the 
content, press         to return to the Function Input screen.
Example:                               to generate the function table for 
                 the range              , incremented in steps of 1.
f (x ) = x3+3x22 x
f(x)=
f(x)= X
3+3X2-2X
Display
Key in operation
d
dx 
						

							68
56
  In COMP mode, you can perform formula calculations using one of the 38 built-in universal formulas.
  Simply press              to enter formula calculation mode and  the formula selection menu will be shown promptly.
  Using Formula Calculation
  1.  Formula Selection and Display
    •  After entering the Formula Selection Menu, press     
      (or     ) for the next (last) formula page. Press          for 
      to display a formula.
    •  To instantly call for a specific formula before entering the  Formula Selection Menu:
        1. Input the number of that formula
        2. Press  
        3. Press         to confirm
  2.  Input the Value for Each Variable Screen
    •  Press         to confirm the input value
    •  Only numeric values and pre-stored memories (to recall  by         + memory variable) can be used as the input of 
the formula.
  3.  Exit Formula Calculation
    •  Before a formula is confirmed: Press              to exit  formula selection menu and return to the latest display.
    •  Press        or        anytime to exit the formula menu and  return to the initial display in COMP mode.
    •  Only the Calculation formula result can be stored into  variable memories via 
Example: To calculate Circular Area:            , with "r" = 2.5mm
Formula Calculation 
Display
Key in operation
Calculation 
Expression
r?
 0
Select FMLA 2
Confirm the FMLA
Enter r value & find 
the result
MATHEMATICS MODE: 
						

							69
57
No.Name of Formula Formula Equation1.  Triangular area:   
2.  Circular area:   
3.  Fan-shaped area:   
4.  Area of parallelogram:
5.  Elliptical area:   
6.  Trapeziform area:   
7.  Spherical surface area:   
8.  Cylindrical surface area:   
9.  Spherical volume:   
10.  Cylindrical volume:   
11.  Conical volume:   
12.  Sum of arithmetic progression:   
13.  Sum of geometric progression:   
14.  Sum of square number:   
15.  Sum of cubic number:   
16.  Distance between arbitrary two points: 
17.  Included angle of the intersecting lines:     
18.  Law of cosines:   
19.  Law of sines:   
20. 
Displacement of uniformly accelerated linear motion:   
21. Velocity of uniformly accelerated linear motion: 
22.  Period of circular motion (1):   
23.  Period of circular motion (2):   
24.  Period of simple pendulum:  
25.  Electric oscillation frequency:   
26.  Resistive formula:   
27.  Joule's theorem (1): 
28.  Joule's theorem (2):   
29.  Resistance of shunt resistance:   
30.  Kinetic energy:   
31.  Gravitational potential energy:   
32.  Centrifugal force (1):    
bcS in A
S
2
1
=
S =r2
22
1
r
S =ab Sin
S =
ab
S=h
b
a
S )
(
2
1
+
=24 r
S=)
(
2 r
h
r
S +
=33 4
r
S=
h
r
V2=h
r
V23
1=
]
)
1
(
2
[
2
10d
n
a
n
S 
+
=
1 )
1
(0 
=
rr
a
Sn
)
1
2
(
)
1
(
6
1
+
+
= n
n
n
S2) )
1
(
2
1
( +
= n
n
S2
1
2
2
1
2)
(
)
( y
y
x
x
d 
+

=
2
1
1 1
2
t a n1k
k k
k
+ 
=
A
b c
c
b
a co s
22
2
+
=
A
r
a sin
2
=2
02
1
at
t
v
d +
=a t
v
v +
=0v
r
T /
2=
/
2
=
T
g l
T2
=
L C
f2 1
=
s l
R 
=
R
V
P2=
R
I
P2=
2
1 2
1
R
R R
R
R
+
=22
1
mv
E =mgh
E =
r
m v
F /2= 
						

							70
58
Replace the battery immediately when the display 
characters are dim (even with a darker LCD display 
contrast) OR when the following message appears on the 
screen. Turn the calculator off and replace the lithium 
battery immediately.
Please replace the lithium battery with the following 
procedures:
1.  Press              to power off the calculator.
2.  Remove the screw that securely fixes the battery cover in place.
3.  Remove battery cover.
4.  Remove the old battery with the tip of a ball pen or  similar sharp object.
5.  Load the new battery with positive “+” side facing up.
6.  Replace the battery cover, screw, and press       ,     
                       to initialize the calculator.
 Caution:  Risk of explosion if battery is replaced with  
    an incorrect type. Dispose of used battery 
    according to the instructions.
  Electromagnetic interference or electrostatic discharge  may cause the display to malfunction or the contents of 
the memory to be lost or altered. Should this occur, 
press       ,                                to restart the calculator .
Battery Replacement
!Low Battery 
33.  Centrifugal force (2):   
34.  The law of gravity:   
35.  Electric field intensity:   
36.  Heron's Formula (Triangular area):    
37.  Refractive index:   
38.  Critical angle of total reflection:     No.Name of Formula Formula Equationr
m
F2=2r
M
m
G
F =)
4
/ (2r
Q
E =)
2
)
(
2
)
(
2
(
2 c
c
b
a
b
c
b
a
a
c
b
a
c
b
a
S 
+
+

+
+

+
+
+
+
=
r
i
E sin
/
si n
=)
1
/
2
(
s in1n
n=