Canon Eos Rebel T6s 760d Instruction Manual

W-27
You can use a smartphone with Camera Connect installed to view images stored in the camera and shoot remotely.The main functions of Camera Connect 
are described below. Touch the screen to 
learn the operation procedures.
[Images on camera]
Images stored in the camera can be 
viewed.
 Images stored in the camera can be 
saved on a smartphone.
 Operations such as deletion can be 
performed on images stored in the 
camera.
[Remote Shooting]
The camera’s Live View image can 
be viewed using a...

W-28
Operating the Camera Using a Smartphone
To terminate the connection, perform 
either of the following operations.
Tap [ t] on the Camera Connect 
screen.
 Set the camera’s power to < 2>.
Terminating the Connection
While connected, a picture cannot be taken even if the camera’s shutter 
button is pressed.
 In remote shooting, the AF speed may become slower.
 Depending on the connection status, image display or shutter release 
may become slower than usual.
The connection will also be terminated...

W-29
The camera can reconnect to a smartphone for which connection settings have been registered.
1Select [Wi-Fi function].
Under the [5 1] tab, set [Wi-Fi/NFC] 
to [ Enable], then select [ Wi-Fi 
function ].
2Select [q].
 Select [ q] (Connect to smartphone) 
and press .
3Establish a connection.
Select [ Connect ] and press < 0>.
 On the confirmation dialog, select 
[OK ].
 When settings for multiple connection 
destinations are registered, select 
[Choose set. ], select the connection 
destination,...

W-30
Reconnecting
4Activate the smartphone’s Wi-Fi 
function.
If the connection destination has 
been changed, restore the setting to 
connect to the camera.
5Start Camera Connect on the 
smartphone.
A connection will be established.
 If you do not know the SSID of the camera when reconnecting, select 
[Review/change settings ] in step 3 to check it.
 With NFC connection or wh en connected by selecting [Easy 
connection ] in camera access point mode, “ _Canon0A” is appended to 
the SSID of the camera. 

W-31
While playing back images on the camera, touch an NFC-enabled 
smartphone to the camera to send a captured image to the smartphone.
If a connection has already been est ablished via a wireless LAN, 
terminate the connection and then play back images on the camera.
 Set up the camera and smartphone to allow use of their NFC 
functions in advance (p.W-20).
1Play back the image.
Press the < x> button to play back 
an image in the single-image display.
2Touch a smartphone to the 
camera.
 Touch the...

W-32
Easy Image Transfer Using the NFC Function
4Press .
5Select [Send img shown].
Press the < Y> < Z> keys to select 
[Send img shown ], then press .
 When you select [ Send selected], 
the screen in step 2 on page W-33 is 
displayed.
 The displayed image will be sent.
 When the transfer is complete, the 
screen for step 3 will reappear. To 
send another image, select an image 
and press  (p.W-34).
6Terminate the connection.
Press the < M> button to display 
the confirmation dialog. Press the 
< Z...

W-33
Easy Image Transfer Using the NFC Function
When the index display is selected in step 1 on page W-31, the image 
selection screen will appear on the camera after a connection is 
established.
1Connect the camera to the 
smartphone.
Play back images in the index display.
 See step 2 on page W-31 to touch the 
smartphone to the camera and 
establish a connection.
 The image selection screen will 
appear.
2Select the images to send.
 Turn the < 5> dial to select an image 
to send, then add [ X]....

W-34
Easy Image Transfer Using the NFC Function
On the screen to complete the process for sending the image, press 
 to send another image.
[Send selected ]
You can select the images to send in 
the image selection screen.
 [Send img shown ]
Sends the displayed image. Display 
the image to send in advance.
Sending Another Image
 If necessary, also read “NFC Function Cautions” (p.W-22).
 While connected, a picture cannot be taken even if the camera’s shutter 
button is pressed.
 Images cannot be sent...

W-35
4
Transferring ImagesBetween Cameras
Images can be transferred between Canon cameras via 
the built-in wireless LAN functions.
 Wireless connection is possible for Canon cameras with built-in 
wireless LAN functions marketed in 2012 or later. Note that the 
camera cannot be connected to Canon camcorders, even if 
they have built-in wireless LAN functions.
 The camera cannot be connected to Canon cameras without 
built-in wireless LAN functions, even if they support Eye-Fi 
cards.
 Still photos...

W-36
Register the target camera to connect to via a wireless LAN. The camera can be connected to only one camera at a time.
1Select [Wi-Fi function].
Under the [5 1] tab, set [Wi-Fi/NFC] 
to [ Enable], then select [ Wi-Fi 
function ].
2Select [z].
 Select [ z] (Transfer imgs between 
cameras), then press < 0>.
3Start the connection on the target 
camera.
 When the screen on the left is 
displayed on the camera, start the 
connection on the target camera as 
well. For the operation procedure, 
refer to...