Canon Eos Rebel T6s 760d Instruction Manual

W-17
3
Easy Connection to aSmartphone
Connecting the camera to a smartphone enables you to 
do the following:
• View or manage images stored in the camera with the 
smartphone.
• Receive images stored in the camera with the smartphone.
• Operate the camera with the smartphone and take a  picture.
The camera cannot be connected to a smartphone when the 
power switch is set to < k>. 

W-18
To communicate with a smartphone, the dedicated smartphone 
application Camera Connect (free of charge) is necessary.
Camera Connect can be downloaded from the App Store or Google 
Play. Install Camera Connect on the smartphone and then perform 
the procedures to establish the connection.
 To use Camera Connect, a smartphone on which iOS or Android 
installed is necessary. For information on supported operating 
systems, refer to the download site of Camera Connect.
 When an NFC-enabled...

W-19
Preparation
When using an Android smartphone, check if it is NFC-enabled.
 When the smartphone is NFC-enabled: See p.W-20
You can easily set up a connec tion using the NFC function.
 When the smartphone is not NFC-enabled: See p.W-23
Set up a connection in camera access point mode.
Smartphones labeled with the  p mark are NFC-enabled. Some 
smartphones are not labeled with the  p mark even if they are NFC-
enabled; if you do not know whether your smartphone is NFC-enabled, 
contact the...

W-20
Connect the camera and a smartphone using the NFC function.
The operation flow for connecting via NFC is as follows.
(1) Turn on the camera and smartphone.
(2) Enable the NFC function on the camera and smartphone.
(3) Touch the smartphone to the camera so that they come into  contact with each other  (p.W-21).
 For the smartphone’s NFC setting and its NFC antenna position, 
refer to the smartphone’s instruction manual.
For the camera’s NFC setting, follow the steps below.
1Select [Wi-Fi/NFC]....

W-21
Connecting with the NFC Function
1Touch a smartphone to the camera.
If an image is being played back on 
the camera, end the playback.
 Touch the  p mark on the smartphone 
to that on the camera.
 When a message indicating the connection is displayed on the 
camera’s LCD monitor, move the smartphone away from the 
camera.
 Camera Connect starts on the smartphone and establishes a 
connection.
 When the operation on the camera is completed in step 2, the 
Camera Connect Main window will appear....

W-22
Connecting with the NFC Function
3Operate the Camera using 
Camera Connect.
Perform further operations using 
Camera Connect. For the operation 
procedure, see page W-27.
The settings for communicating with a smartphone are now complete.
NFC Function Cautions
 When touching the smartphone to the camera, be careful not to drop the 
camera or smartphone.
 Do not touch the smartphone to the camera with too much force. Doing 
so can scratch the camera or smartphone.
 Just holding the smartphone...

W-23
Smartphones that are not NFC-enabled can be connected in camera 
access point mode.
To establish connection, operations on the smartphone are required. 
For details, refer to the smartphone’s instruction manual.
1Select [Wi-Fi function].
Under the [5 1] tab, set [Wi-Fi/NFC] 
to [ Enable], then select [ Wi-Fi 
function ].
2Select [q].
 Select [ q] (Connect to smartphone) 
and press .
3Select [Camera access point 
mode].
Press the < W> < X> keys to select 
[Camera access point mode ], then 
press <...

W-24
Using Camera Access Point Mode to Establish a Connection
4Select [Easy connection].
Press the < W> < X> keys to select 
[Easy connection ], then press .
 Select [ OK] and press < 0> to go to 
the next screen.
5Operate the smartphone and 
connect it to the camera.
 Activate the smartphone’s Wi-Fi 
function, then select the SSID 
(network name) displayed on the 
camera’s LCD monitor.
 For the password, enter the 
encryption key displayed on the 
camera’s LCD monitor.
Operation on the Smartphone-1...

W-25
Using Camera Access Point Mode to Establish a Connection
6Start Camera Connect on the 
smartphone.
When the smartphone’s Wi-Fi 
settings are completed, start Camera 
Connect.
7Select the camera to connect to 
on the smartphone.
Select and touch the camera to 
connect to from [ Cameras] on 
Camera Connect to establish a 
connection.
 When the operation on the camera is 
completed in step 8 on the next page, 
the Camera Connect Main window 
will appear. 

W-26
Using Camera Access Point Mode to Establish a Connection
8Connect to the camera.
When a connection is established, 
the screen on the left will appear on 
the camera’s LCD monitor.
 Press the < Z> key to select [ OK], 
then press < 0>.
 After a message is displayed, the 
camera’s LCD monitor will turn off.
9Operate the camera using 
Camera Connect.
 Perform further operations using 
Camera Connect. For the operation 
procedure, see page W-27.
The settings for communicating with a smartphone are...