Canon Eos Rebel T6s 760d Instruction Manual

111
3 Setting the Image-Recording Quality
* The file size, possible shots, and maximum burst during continuous shooting are 
based on Canon’s testing standards (3:2 aspect ratio, ISO 100 and Standard 
Picture Style) using an 8 GB card.  These figures will vary by the subject, 
card brand, aspect ratio, ISO speed, Picture Style, Custom Functions, and 
other settings.
* Figures in parentheses apply to an UHS-I compatible 8 GB card based on  Canon’s testing standards.
Guide to Image-recording Quality...

112
Set the ISO speed (image sensor’s sensitivity to light) to suit the 
ambient light level. In Basic Zone modes, the ISO speed is set 
automatically.
1Press the  button (9 ).
2Set the ISO speed.
While looking at the LCD panel or in 
the viewfinder, turn the < 6> or 
< 5 > dial.
 “A” indicates ISO Auto. The ISO 
speed will be set automatically.
ISO Speed Guide
* High ISO speeds will result in grainier images.
g : Changing the ISO Speed to Suit the LightK
ISO SpeedShooting Situation
(No flash)Flash...

113
By selecting a Picture Style, you can obtain image characteristics 
matching your photographic ex pression or the subject.
In Basic Zone modes, [D] (Auto) is set automatically.
1Press the  button.
The Picture Style selection screen will 
appear.
2Select a Picture Style.
 Select a Picture Style, then press 
.
 The Picture Style will be set.
A Selecting a Picture StyleK
You can also set the Picture Style with [z2: Picture Style ]. 

114
The function adjusting the color tone so that white objects look white in 
the picture is called white balance (WB). Normally, the [ Q] (Auto) 
setting will obtain the correct whit e balance. If natural-looking colors 
cannot be obtained with [ Q], you can select the white balance to 
match the light source or set it  manually by shooting a white object.
1Press the  button.
[White balance ] will appear.
2Select a white balance setting.
Select the desired setting, then press 
.
 The “Approx. ****K”...

115
If the image comes out dark or the contrast is low, the brightness and 
contrast can be corrected automatical ly. This function is called Auto 
Lighting Optimizer. The default setting is [ Standard]. With JPEG 
images, the correction is applied when the image is captured. 
In Basic Zone modes, [ Standard] is set automatically.
1Select [Auto Lighting Optimizer].
Under the [z 2] tab, select [Auto 
Lighting Optimizer ], then press 
< 0 >.
2Select the setting.
 Select the desired setting, then press...

116
This function reduces the noise generated in the image. Although noise 
reduction is applied at all ISO speeds, it is particularly effective at high 
ISO speeds. At low ISO speeds, the noise in the darker parts of the 
image (shadow areas) is further reduced. Change the setting to suit the 
noise level.
1Select [High ISO speed NR].
Under the [z 3] tab, select [High ISO 
speed NR ], then press < 0>.
2Set the level.
 Select the desired noise reduction 
level, then press .
 [M: Multi Shot Noise...

117
3 Setting Noise Reduction K
Noise reduction is possible with images exposed for 1 sec. or longer.
1Select [Long exp. noise 
reduction].
Under the [z 3] tab, select [Long 
exp. noise reduction ], then press 
< 0 >.
2Set the desired setting.
 Select the desired setting, then press 
.
 [Auto]
For exposures of 1 sec. or longer , noise reduction is performed 
automatically if noise typical of long exposures is detected. This 
[Auto ] setting is effective in most cases.
 [Enable]
Noise reduction is...

118
Peripheral light fall-off is a phenomenon that makes the image corners 
look darker due to the lens characteristics. Color fringing along subject 
outlines is called chromatic aberrati on. And image distortion due to lens 
characteristics is called distortion.  These lens aberrations and light fall-
off can be corrected. By default, Peri pheral illumination and Chromatic 
aberration correction are set to [ Enable], and Distortion correction is set 
to [Disable].
1Select [Lens aberration...

119
3 Correction of Lens Peripheral Illumination and Aberrations
2Take the picture.
The image will be recorded with the 
chromatic aberration corrected.
1Select the setting.
Check that [ Correction data 
available ] is displayed for the 
attached lens.
 Select [ Distortion ], then press < 0>.
 Select [ Enable], then press < 0>.
2Take the picture.
 The image will be recorded with the 
distortion corrected.
The camera already contains data  for lens peripheral illumination 
correction, chromatic...

120
If you shoot an image with a fast shutter speed under a light source 
such as fluorescent light, the blinking  of the light source causes flicker 
and the image may be vertically  unevenly exposed. If continuous 
shooting is used under these conditions, uneven exposures or colors 
across the images may result.
With anti-flicker shooting, the camera  detects the frequency of the light 
source’s blinking and takes the pictur e when the flicker causes less 
effect on exposure or color.
1Select...