Canon Eos Rebel T6s 760d Instruction Manual

101
19 AF points are provided for autofocusing. You can select the AF area selection mode and AF point(s) suiting the scene or subject.
You can select one of three AF area selection modes. See the next 
page for the selection procedure.
h: Single-point AF (Manual 
selection)
Select one AF point to focus.
q : Zone AF (Manual selection of 
zone)
The 19 AF points are divided into five 
zones for focusing.
r : 19-point automatic selection 
AF
All the AF points are used to focus.  This 
mode is set...

S Selecting the AF Area and AF Point K
102
1Press the  or  button 
(9 ).
Look through the viewfinder and 
press the < S> or < B> button.
2Press the  button.
Each time you press the  
button, the AF area selection mode 
changes.
 The AF area selection mode currently 
set is indicated on the top of the 
viewfinder.
h : Single-point AF 
(Manual selection)
q :Zone AF 
(Manual selection of zone)
r : 19-point automatic selection 
AF
Selecting the AF Area Selection Mode
AF area selection mode 

103
S Selecting the AF Area and AF Point K
You can manually select the AF point or zone. If 19-point automatic 
selection AF + AI Servo AF has been set, you can select any position 
where AI Servo AF is to start.
1Press the  or  button 
(9 ).
The AF points will be displayed in the 
viewfinder.
 In the Zone AF mode, the selected 
zone will be displayed.
2Select an AF point.
You can select an AF point by shifting 
horizontally with the  dial or 
vertically with the < 5> dial. If you 
press < 0>, the...

104
Select one AF point  to be used for focusing.
The 19 AF points are divided into five zones for focusing. All the AF 
points in the selected zone are used for the automatic selection of the 
focusing point(s). It is ef fective for moving subjects.
However, since it is inclined to  focus the nearest subject, focusing a 
specific target is harder than with single-point AF.
The AF point(s) achieving focus is displayed as < S>.
All the AF points are used to focus.  This mode is set automatically in 
Basic...

105
1Set the lens focus mode switch to 
.
2Focus on the subject.
 Focus by turning the lens focusing 
ring until the subject looks sharp in 
the viewfinder.
MF: Manual Focus
Focusing ring 

106
Single and continuous drive modes are provided.
1Press the  button.
[Drive mode ] will appear.
2Select the drive mode.
Press the < Y> < Z> keys to select 
the desired drive mode, then press 
< 0 >.
u :Single shooting
When you press the shutter button completely, only one shot will 
be taken.
i :Continuous shooting  (Max. approx. 5.0 shots/sec.)
While you hold down the shutter button completely, shots will be 
taken continuously.
B :Silent single shooting
Single shooting with less shooting sound...

107
1Press the  button.
[Drive mode ] will appear.
2Select the self-timer.
Press the < Y> < Z> keys to select 
the self-timer, then press .
Q :10-sec. self-timer
The remote controller can also 
be used.
l :2-sec. self-timer (p.79)
q :10-sec. self-timer plus 
continuous shots
Press the   keys to set 
the number of multiple shots (2 to 
10) to be taken with the self-timer. 
3Take the picture.
 Look through the viewfinder, focus on 
the subject, then press the shutter 
button completely.
 You can check...

109
4
Image Settings
This chapter explains image-related function settings: 
Image-recording quality, ISO speed, Picture Style, white 
balance, Auto Lighting Optimizer, noise reduction, lens 
aberration correction, anti-flicker shooting, and other 
functions.
The J icon at the upper right of the page title indicates that 
the function is available only in Creative Zone modes (p.27). 

110
You can select the pixel count and the image quality. Ten image-
recording quality settings are provided: 73, 83, 74 , 84, 7a, 
8a , b , c, 1+ 73, 1 .
1Select the image-recording 
quality.
Under the [z 1] tab, select [Image 
quality ], then press < 0>.
 [Image quality ] will appear.
2Set the image-recording quality.
The respective quality’s pixel count 
and number of possible shots will be 
displayed to help you select the 
desired quality. Then press .
3 Setting the Image- Recording Quality...