Canon Eos Rebel T6 1300d Instruction Manual

291
Troubleshooting Guide
If you shoot at night when the background is dark, the shutter speed 
automatically becomes slow (slow-sync shooting) so that both the 
subject and background are properly exposed. To prevent a slow 
shutter speed, under [ 53: Custom Functions (C.Fn) ], set [3: Flash 
sync. speed in Av mode] to [ 1: 1/200-1/60sec. auto] or [2: 1/200sec. 
(fixed)] (p.261).
 In shooting modes (< A>    ) whose default 
setting is < a> (built-in flash auto firing), the built-in flash will be...

Troubleshooting Guide
292
Under [ 53: Custom Functions (C.Fn) ], set [3: Flash sync. speed in 
Av mode ] to [0: Auto ] (p.261).
 The built-in flash’s pop-up mechanism moves slightly. This is normal 
and not a malfunction.
 If you use flash, the shutter will make two sounds each time you shoot 
(p.141).
 It indicates that the camera’s internal temperature is high. If the white 
 icon is displayed, the still photo’s image quality may deteriorate. 
If the red < E> icon is displayed, it indicates that...

293
Troubleshooting Guide
If [k 1: Movie exposure ] is set to [Auto], the ISO speed will be set 
automatically. If [Manual ] is set, you can set the ISO speed manually 
(p.162).
 If you change the shutter speed or aperture during movie shooting, the 
changes in the exposure may be recorded.
 Zooming the lens during movie shooting can cause changes in the 
exposure regardless of whether the lens’s maximum aperture changes 
or not. The changes in the exposure may be recorded as a result.
 If you move...

Troubleshooting Guide
294
In Basic Zone modes and in movie shooting mode, certain tabs and 
menu options are not displayed. Set the shooting mode to a Creative 
Zone mode (p.50).
 Set the color space to sRGB. If Adobe RGB is set, the first character 
will be an underscore (p.137).
 It is a movie file (p.189).
 If the card already contains recorded images, the image number may 
not start from 0001 (p.188).
 Check that the correct date and time are set (p.41).
 Check the time zone and daylight saving...

295
Troubleshooting Guide
If the LCD monitor is dirty, use a soft cloth to clean it.
 In low or high temperatures, the LCD monitor display may seem slow 
or may look black. It will return to normal at room temperature.
 [Eye-Fi settings] will appear only when an Eye-Fi card is inserted in 
the camera. If the Eye-Fi card has a write-protect switch set to the 
LOCK position, you will not be able to check the card’s connection 
status or disable Eye-Fi transmission (p.274).
 It is the highlight alert...

Troubleshooting Guide
296
During autoexposure movie shooting, if there is a drastic change in the 
exposure level, the recording will stop momentarily until the brightness 
stabilizes. In such cases, shoot movies with manual exposure (p.162).
 An HDMI cable (sold separately) is necessary to connect the camera 
to a TV set. Using the HDMI Cable HTC-100 (sold separately) is 
recommended (p.226).
 Also check that your TV set has an HDMI IN terminal. If the TV set 
does not have an HDMI IN terminal and...

297
Troubleshooting Guide
If [53: Wi-Fi/NFC ] is set to [Enable], the camera cannot be connected 
to a printer. Set [Wi-Fi/NFC ] to [Disable ], then reconnect the camera 
to a printer with an interface cable.
 Contents displayed on the screen vary depending on the printer. This 
instruction manual lists all the printing effects available (p.246).
 Install the EOS software on the computer (p.315).
 If [53: Wi-Fi/NFC ] is set to [Enable], the camera cannot be connected 
to a computer. Set [Wi-Fi/NFC ]...

298
If there is a problem with the camera, an 
error message will appear. Follow the on-
screen instructions.
* If the error still persists, write down the error number and contact your 
nearest Canon Service Center.
Error Codes
NumberError Message and Solution
01
Communications between the camera and lens is faulty. Clean the 
lens contacts.
 Clean the electrical contacts on the camera and lens or use a 
Canon lens (p.25, 26).
02 Card cannot be accessed. Reinsert/change card or format card 
with...

299
•TypeType:Digital, single-lens reflex, AF/AE camera with built-in 
flash
Recording media:
SD memory card, SDHC memory  card, SDXC memory cardImage sensor size: Approx. 22.3 x 14.9 mm
Compatible lenses: Canon EF lens es (including EF-S lenses)
* Excluding EF-M lenses
(35mm-equivalent angle of view is that of a lens with 
approx. 1.6x the focal length indicated.)
Lens mount: Canon EF mount
• Image SensorType: CMOS sensor
Effective pixels: Approx. 18.0 megapixels
Aspect ratio: 3:2
Dust delete feature:...

300
Specifications
Noise reduction: Applicable to long exposures and high ISO speed shots
Automatic image 
brightness correction:Auto Lighting Optimizer
Highlight tone priority: Provided
Lens peripheral 
illumination correction: Provided
• ViewfinderType:
Eye-level pentamirror
Coverage: Vertical/Horizontal approx. 95% (with eyepoint approx. 
21 mm)
Magnification: Approx. 0.8x (-1 m
-1 with 50mm lens at infinity)
Eye point: Approx. 21 mm (from eyepiece lens center at -1 m-1)
Diopric adjustment 
range:...