Canon Eos Rebel T6 1300d Instruction Manual

261
3 Custom Function Settings N
C.Fn-3 Flash Synchronization Speed in Av Mode
You can set the flash-sync speed for flash photography in the 
aperture-priority AE  mode.
0: Auto The flash sync speed is set autom atically within a range of 1/200 
sec. to 30 sec. to suit the scene’s brightness. With an external 
Speedlite, high-speed sync will also be possible.
1:   1/200-1/60 sec. auto Prevents a slow shutter speed fr om being set in low-light 
conditions. It is effective for prev enting subject blur and...

3 Custom Function Settings N
262
C.Fn II: Image
C.Fn-4 Long Exposure Noise Reduction
0:   Off
1:   Auto
For exposures of 1 sec. or longer, noise reduction is performed 
automatically if noise typical of long exposures is detected. This 
[Auto ] setting is effective in most cases.
2:   On Noise reduction is performed for al l exposures of 1 sec. or longer. 
The [ 2: On] setting may reduce noise that cannot be detected with 
the [1: Auto ] setting.
With settings 1 and 2, after the picture is taken, the...

263
3 Custom Function Settings N
C.Fn-5 High ISO speed noise reduction
This function reduces the noise generated in the image. Although 
noise reduction is applied at all ISO s peeds, it is particularly effective 
at high ISO speeds. At low ISO speeds, the noise in the darker parts of 
the image (shadow areas) is further reduced. Change the setting to 
suit the noise level.
0: Standard 2: Strong
1: Low 3: Disable
C.Fn-6 Highlight tone priority
0:   Disable
1:   Enable Improves the highlight detail.  The...

3 Custom Function Settings N
264
C.Fn III: Autofocus/Drive
C.Fn-7 AF-assist beam firing
Enables or disables the built-in flash’s AF-assist beam or the EOS-
dedicated external Speedlite’s AF-assist beam.
0: Enable
The AF-assist beam will be emitted when necessary.
1: Disable The AF-assist beam will not be emitted. This prevents the AF-
assist beam from disturbing others.
2:  Enable external flash only If an external Speedlite is attached,  it will emit the AF-assist beam 
when necessary. The camera’s...

265
3 Custom Function Settings N
C.Fn IV: Operation/Others
C.Fn-8 Shutter/AE lock button
0: AF/AE lock
1: AE lock/AF
This is convenient when you want to focus and meter separately. 
Press the < A> button to autofocus, and press the shutter button 
halfway to apply AE lock.
2:  AF/AF lock, no AE lock During AI Servo AF, you can press the < A> button to pause the 
AF operation momentarily. This prevents the AF from being thrown 
off by any obstacle passing between the camera and subject. The 
exposure is...

3 Custom Function Settings N
266
C.Fn-9 Assign SET button
You can assign a frequently-used function to . When the camera is ready to 
shoot, pressing the  button will display the respective function setting screen.0: Normal (disabled)
1: Image quality The image quality setting screen will appear. Select the desired 
image-recording quality, then press < 0>.
2:  Flash exposure compensation The flash exposure compensation setting screen will appear. Set 
the adjustment amount, then press < 0>.
3:  LCD...

267
Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently.
1Select [My Menu settings].
Under the [9 ] tab, select [My Menu 
settings ], then press < 0>.
2Select [Register to My Menu].
 Select [ Register  to My Menu ], then 
press < 0>.
3Register the desired items.
 Select the item, then press < 0>.
 On the confirmation dialog, select 
[OK ] and press < 0> to register the 
item.
 You can register up to six items.
 To return to the...

268
MEMO 

269
12
Reference
This chapter provides reference information for camera 
features, system accessories, etc.
Certification Logo
Under the [53] tab, if you select [ Certification Logo Display ] 
and press < 0>, some of the logos of the camera’s certifications 
will appear. Other certification logos can be found in this 
Instruction Manual, on the camera body, and on the camera’s 
package. 

270
You can power the camera with a household power outlet by using the 
DC Coupler DR-E10 and Compact Power Adapter CA-PS700 (both 
sold separately).
1Connect the DC coupler.
Connect the DC cord’s plug to the DC 
coupler.
2Insert the DC coupler.
Open the cover and insert the DC 
coupler until it locks in place.
3Push in the DC cord.
Open the DC cord hole cover and 
install the cord as shown in the 
illustration.
 Close the cover.
4Connect the power cord.
Connect the power cord as shown in 
the...