Canon Eos Rebel T3i 600d Instruction Manual

261
This remote controller enables you to take pictures wirelessly up to 
about 5 meters/16.4 feet from th e camera. You can either shoot 
immediately or use a 2-sec. delay.
  Set the self-timer to < Q> (p.89).
  Point the remote controller toward the camera’s remote control 
sensor and press the transmit button.
X The camera will autofocus.
X When focus is achieved, the self-t imer lamp will light and the picture 
will be taken.
Remote Control Shooting
Remote Controller RC-6 (Sold separately)
Remote...

Remote Control Shooting
262
Remote Switch RS-60E3 (sold separately) comes with an approx. 
60 cm/2.0 ft cord. When connected to the camera’s remote control 
terminal, Remote Switch RS-60E3 can be used to press the shutter 
button halfway and completely.
When you use the self-timer, bulb, or Remote Switch and do not look 
through the viewfinder, stray light entering the viewfinder can cause the 
image to look dark. To prevent this, use the eyepiece cover (p.25) 
attached to the camera strap.
During Live...

263
Basically operates like a built-in flash for easy operation.
When an EX-series Speedlite (sold separately) is attached to the 
camera, almost all the autoflash control is done by the camera. In other 
words, it is like a high-output flash  attached externally in place of the 
built-in flash.
For detailed instructions, see the EX-series Speedlite’s instruction 
manual. This camera is a Type-A camera that can use all the features 
of EX-series Speedlites.
External Speedlites
EOS-dedicated, EX-series...

External Speedlites
264
 With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL 
autoflash mode, the flash can be  fired at full output only. 
Set the camera’s shooting mode to < a> (manual exposure) or 
< f > (aperture-priority AE) and adjust the aperture setting before 
shooting.
  If you are using a Speedlite which has manual flash mode, shoot in 
the manual flash mode.
Sync Speed
The camera can synchronize with co mpact, non-Canon flash units at 
1/200 sec. or slower shutter s peeds. Use a sync...

265
With a commercially-available Eye-Fi card already set up, you can 
automatically transfer captured images to a personal computer or 
upload them to an online service via a wireless LAN. 
The image transfer is a function of the Eye-Fi card. For instructions on\
 
how to set up and use the Eye-Fi card or to troubleshoot any image 
transfer problems, refer to the Eye-Fi card’s instruction manual or 
inquire the card’s manufacturer. The camera is not guaranteed to support Eye-Fi card 
functions...

Using Eye-Fi Cards
266
5Check the [Access point SSID:].
 Check that an access point is 
displayed for [ Access point SSID: ].
  You can also check the Eye-Fi card’s 
MAC address and firmware version.
  Press the < M> button three 
times to exit the menu.
6Take the picture.
X The picture is transferred and the 
 icon switches from gray (Not 
connected) to one of the icons below.
  For transferred images,  O is 
displayed in the shooting information 
display (p.226).
H (Gray) Not connected : No connection...

267
Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards If “J ” is displayed, an error occu rred while retrieving the card 
information. Turn the camera’s  power switch off and on again.
  Even if [Eye-Fi trans. ] is set to [Disable], it may still transmit a signal. In 
hospitals, airports, and other places  where wireless transmissions are 
prohibited, remove the Eye-Fi card from the camera.
  If the image transfer  does not function, chec k the Eye-Fi card and 
personal computer settings. For de tails,...

268
o: Set automatically   k: User selectable    : Not selectable
*1 : The  z icon indicates still photo shoo ting in the movie shooting mode.
*2 : For manual exposures only.
*3 : If used during movie shooting, it will switch to < d>.
*4 : If the AF mode is < f> during Live View shooting, the external Speedlite 
will emit the AF-assis t beam when necessary.
Function Availability Table According to Shooting Modes
k
o
D
o
o
k
o
o
o
o
o
k k
o
D
k
ko
o
k
o
o
o
o
o
k k
o
D
k
ko
o
k
o
o
o
o
o
k k
o
D
k
o
o
k...

269
Function Availability Table According to Shooting Modes
*5 : Settable only for Live View shooting.
*6 : Settable only for auto exposures.
o
k
k
k o
k
k
k
k o
k
k
k o
k
k
k
k o
k
k
k o
k
k
k
k o
k
k
k o
k
k
k
k
o
k
k
k o
k
k
k
o
k
k
k o
k
k
k o
k
k
k
k
k
k
k
k
k
k
k k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
o
k
k
k o
k...

270
1 Shooting 1 (Red)Page
2 Shooting 2  (Red)
3 Menu Settings
For Viewfinder Shooting and Live View Shooting
Quality73 / 83  / 74  / 84  / 7a / 8 a  / b  / c  / 
1 +73  / 176
Beep
Enable / Disable166
Release shutter 
without card
Enable / Disable166
Image review
Off / 2 sec. / 4 sec. / 8 sec. / Hold166
Peripheral illumination 
correctionEnable / Disable11 0
Red-eye reduction
Disable / Enable91
Flash control
Flash firing / E-TT L II metering mode / 
Built-in flash function  setting / External flash...