Canon Eos Rebel T3i 600d Instruction Manual

241
wPrinting
5Set the date and file number 
imprinting.
 Set as necessary.
  Select <
I>, then press .
  Set as desired, then press < 0>.
6Set the number of copies.
  Set as necessary.
  Select , then press < 0>.
  Set the number of copies, then press 
.
7Start printing.
  Select [Print ], then press < 0>.
  With Easy printing, you  can print another image us ing the same settings. 
Just select the image and press the  button. With Ea sy printing, the 
number of copies will  always be 1. (You cann ot...

wPrinting
242
In step 4 on page 240, select the printing 
effect. When the < e> icon is displayed 
brightly next to < x>, you can press 
the < C> button to adjust the printing 
effect. What can be adjusted or what is 
displayed will depend on the selection 
made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen displayed, press...

243
wPrinting
You can crop the image and print only 
the trimmed portion as if the image was 
recomposed.  Do the trimming right 
before printing. If you set the trimming 
and then set the print settings, you may 
have to set the trimming again.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
 The image area within the tri mming frame will be printed. The 
trimming frame’s aspect ra tio can be changed with [Paper settings].
Changing the...

wPrinting
244
 Depending on the printer , the trimmed image area  might not be printed 
as you specified.
  The smaller you make the trimming fr ame, the grainier the picture will 
look in the print.
  While trimming the image, look at th e camera’s LCD monitor. If you look 
at the image on a TV sc reen, the trimming frame  might not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no in k, no paper, etc.) and select [Continue] to 
resume printing but it doe s not resume,...

245
You can set the print type, date imprinting, and file No. imprinting. The 
print settings will be applied to all print-ordered images. (They cannot 
be set individually for each image.)
1Select [Print order].
  Under the [ 3] tab, select [Print 
order], then press < 0>.
2Select [Set up].
  Select [Set up ], then press .
3Set the option as desired.
  Set the [Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, 
then press < 0>.
W Digital...

W Digital Print Order Format (DPOF)
246
4 Exit the setting.
 Press the < 7> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images  are printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded  date on the print.
Off
File numberOn[On ] imprints the file No. on the print.
Off
  Even if [...

247
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
To display the three-image display, press 
the  button. To return to the 
single-image display, press the < u> 
button.
After completing the print order, press 
the < M > button to save the print 
order to the card.
[Standard] [Both]
Press the < V> key to set the number of 
copies to be printed for the displayed 
image.
[Index]
Press the < V> key to checkmark the 
box < X> and the image will be included 
in the index...

248
With a PictBridge printer, you can easily 
print images with DPOF.
1Prepare to print.
 See page 236. Follow the “Connecting  the Camera to a Printer” 
procedure up to step 5.
2Under the [ 3] tab, select [Print order].
3Select [Print].
  [Print] will be displayed only if the camera is connected to a 
printer and printing is possible.
4Set the [Paper settings] (p.238).
 Set the printing effects (p.240) if necessary.
5Select [OK].
W Direct Printing with DPOF
  Before printing, be sure  to set the paper...

249
Customizing theCamera
You can customize various came ra features to suit your 
picture-taking preferences with Custom Functions. 
Custom Functions can be set and used only in Creative 
Zone modes.
Creative Zone
COPY  

250
1Select [Custom Functions (C.Fn)]. 
 Under the [ 7] tab, select [Custom 
Functions (C.Fn)], then press < 0>.
2Select the Custom Function No.
  Press the < U> key to select the 
Custom Function No., then press 
< 0 >.
3Change the setting as desired.
  Press the < V> key to select the 
setting (number), then press < 0>.
  Repeat steps 2 and 3 if you want to 
set other Custom Functions.
  At the bottom of the screen, the 
current Custom Function settings are 
indicated below the respective 
function...