Canon Eos Rebel T3i 600d Instruction Manual

221
Viewing the Images on TV
1Connect the provided AV cable to 
the camera.
 With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < > terminal.
2Connect the AV cable to the TV 
set.
  Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminal.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the TV 
screen (Nothing will be displayed on 
the...

222
Protecting an image prevents it from being erased accidentally.
1Select [Protect images].
 Under the [ 3] tab, select [Protect 
images ], then press < 0>.
X The protect setting screen will 
appear.
2Select [Select images].
  Select [Select images ], then press 
< 0 >.
3Protect the image.
  Press the < U> key to select the 
image to be protected, then press 
< 0 >.
X When an image is protected, the 
 icon will appear on the top of 
the screen.
  To cancel the image protection, press 
 again. The < K>...

223
K Protecting Images
You can protect all the images in a folder or card at one time.
When you select [All images in folder ] 
or [ All images on card ] in [3 Protect 
images ], all the images in the folder or 
card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
3 Protecting All Images in a Folder or Card
If you format the card  (p.45), the protected images will also be erased.
 Movies can also be protected.
  Once an...

224
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.222) will not be erased. Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a 1 +73  image will erase both the  1 and 
73 images.
1Playback the image to be erased.
2Press the < L> button.
XThe erase dialog will appear at the 
bottom of the screen.
3Erase the...

225
L Erasing Images
2Select [Select and erase images].
  Select [Select and erase images ], 
then press < 0>.
X The images will be displayed.
  To display the three-image display, 
press the < I> button. To return to 
the single-image display, press the 
< u > button.
3Select the images to be erased.
  Press the < U> key to select the 
image to be erased, then press the 
< V > key.
X A  checkmark will be displayed 
on the upper left.
  To select other images to be erased, 
repeat step 3.
4Erase the...

226
* With 1+73  images, the  1 file size is displayed.
* For still photos taken  in movie shooting mode,  will be displayed.
* If a Creative filter or Resize has been applied to the image, the < 1+> icon will 
change to < u>.
* Photos taken with flash without any  flash exposure compensation are marked 
with the < > icon. Photos taken with fl ash exposure compensation are marked 
with the < y> icon.
C  Shooting Information Display
Sample Image Taken in a Creative Zone Mode
Flash exposure
compensation...

227
C Shooting Information Display
* For images taken in Basic Zone mode s, the information displayed differ 
depending on the  shooting mode.
* Photos taken in the < C> mode will show [ Background blur].
* If manual exposure was used, the sh utter speed, aperture, and ISO speed 
(when set manually) will be displayed.
* The < > icon will be disp layed for a video snapshot.
Sample Image Taken in a Basic Zone Mode
Sample Movie Taken in Movie Mode
Ambience and 
ambience effects
Lighting or scene
Shooting...

C Shooting Information Display
228
 About the Highlight AlertWhen the shooting information is disp layed, any overexposed areas of the 
image will blink. To obtain more image  detail in the overexposed areas, set 
the exposure compensation to a neg ative amount and shoot again.
 About the Histogram
The brightness histogram shows the  exposure level distribution and 
overall brightness. The RGB histogram is for checking the color 
saturation and gradation. The display can be switched with [ 4 
Histogram...

229
Post-ProcessingImages
After shooting, you can apply Creative filters or resize 
the images (downsize the pixel count).
 It may not be possible to proces s images shot with a different 
camera.
  Post-processing images as described in this chapter cannot be 
done while the camera is conn ected to a personal computer 
via the  terminal.
COPY  

230
You can apply the following Creative filters to an image and save it as a 
new image: Grainy B/W, Soft focus, Fish-eye effect, Toy camera effect, 
and Miniature effect.
1Select [Creative filters].
  Under the [ 3] tab, select [Creative 
filters ], then press < 0>.
X The images will be displayed.
2Select an image.
  Select the image you want to apply a 
filter to.
  By pressing the < I> button, you 
can switch to the  index display and 
select an image.
3Select a filter.
  When you press < 0>, the...