Canon EOS 7D Instruction Manual

241
When you set the copyright information, it will be appended to the image as Exif information.
1Select [Copyright information].
Under the [ 7] tab, select [ Copyright 
information ], then press < 0>.
2Select the desired option.
 Select [ Display copyright info. ] to 
check the copyright information 
currently set.
 Select [ Delete copyright 
information ] to delete the copyright 
information currently set.
 Turn the < 5> dial, select either 
[Enter author’s name ] or [Enter 
copyright details ],...

242
3 Setting Copyright Information N
Changing the entry area
Press the < A> button to toggle 
between the top and bottom entry 
areas.
 Moving the cursor
Turn the < 5> dial to move the 
cursor. You can also use < 9> to 
move the cursor.
 Entering text
In the bottom area, turn the < 5> dial to select a character, then 
press < 0> to enter it. You can also tilt < 9> up, down, left, or right 
to select a character and press it straight down to enter the 
character.
 Deleting a character
Press the < L>...

243
13
Reference
This chapter provides reference information for camera 
features, system accessories, etc. The back of this 
chapter also has an index to make it easier to look up 
needed information. 

244
When you press the  button while 
the camera is ready to shoot, you can 
display [ Displays camera settings], 
[Displays shooting functions ] (p.245), 
and [Electronic level] (p.50).
Under the [ 7] tab, the [ INFO. button 
display options] option enables you to 
select what the < B> button is to 
display when pressed.
 Turn the < 5> dial to select the 
desired item, then press  to 
append a < X> checkmark.
 After making the selection, turn the 
 dial to select [ OK], then press 
< 0 >.
* This icon...

245
B Button Functions
* If flash exposure compensation is set wi th an external Speedlite, the flash 
exposure compensation icon will change from < y> to < C>.
When you press the < Q> button, the Quick Control screen appears 
(p.38).
 If you press the , , , or  button, 
the setting screen will appear on the LCD monitor and you can turn 
the < 6> or < 5> dial to set the respective function. You can also 
select the AF point with < 9>.
Shooting Settings
White balance correction Aperture
Metering mode...

246
You can check the battery’s condition on the LCD monitor. A Battery 
Pack LP-E6 has a unique serial No., and you can register multiple 
battery packs to the camera. When you use this feature, you can check 
the registered battery pack’s remaining capacity and operation history.
Select [Battery info.].
Under the [7 ] tab, select [Battery 
info. ], then press < 0>.
 The battery info screen will appear.
3 Checking the Battery Information
Model of the battery or household power 
source being used.
The...

247
3 Checking the Battery Information
You can register up to six Battery Pack LP-E6’s to the camera. To 
register multiple battery packs to the camera, do the procedure below 
for each battery pack.
1Press the  button.
With the Battery info. screen 
displayed, press the < B> button.
 The battery history screen will 
appear.
 If the battery has not been registered, 
it will be grayed out.
2Select [Register].
 Turn the < 5> dial to select 
[Register ], then press < 0>.
 The confirmation dialog will...

248
3 Checking the Battery Information
Affixing the serial No. onto all the registered Battery Pack LP-E6’s with 
a label makes it convenient.
1Write the serial No. on a label.
Write the serial No. displayed on the 
battery history screen on a label 
about 25 mm x 15 mm / 1.0 in. x 0.6 
in. in size.
2Take out the battery and affix the 
label.
Set the power switch to < 2>.
 Open the battery compartment cover 
and remove the battery.
 Affix the label as shown (side with no 
electrical contacts) in the...

249
3 Checking the Battery Information
You can check the remaining capacity  of any battery pack (even while 
not installed) and also when it was last used.
Look for the serial No.
Refer to the battery’s serial No. label 
and look for the battery’s serial No. on 
the battery history screen.
 You can check the respective battery 
pack’s remaining capacity and the 
date when it was last used.
1Select [Delete info.].
 Follow step 2 on page 247 to select [ Delete info.], then press
< 0 >.
2Select the...

250
With the AC Adapter Kit ACK-E6 (sold separately), you can connect the 
camera to a household power outlet and not worry about the battery 
level.
1Connect the DC Coupler’s plug.
 Connect the DC Coupler’s plug to the 
AC Adapters socket.
2Connect the power cord.
Connect the power cord as shown in 
the illustration.
 After using the camera, unplug the 
power plug from the power outlet.
3Place the cord in the groove.
Insert the DC Coupler’s cord carefully 
without damaging the cord.
4Insert the DC...