Canon EOS 7D Instruction Manual

191
9
Post-ProcessingImages
You can process RAW images with the camera or 
resize (shrink) JPEG images.
A M  icon at the upper right of a page title indicates that the 
function can be used when the Mode Dial is set to < d/s /
f /a/F >.
* Function which cannot be used in the fully-automatic  modes ( 1/C ).
You cannot process the RAW images or resize JPEG images 
shot when the firmware version was 1.x.x with the camera 
updated to version 2.x.x.
 The camera may not be able  to process images taken with...

192
You can process 1 images with the camera and save them as 
JPEG images. While the RAW image itself does not change, you can 
process the RAW image according to di fferent conditions to create any 
number of JPEG images from it.
Note that  41 and 61  images cannot be processed with the 
camera. Use Digital Photo Professional (provided software, p.282) to 
process those images.
1Select [RAW image processing].
 Under the [3 ] tab, select [RAW 
image processing ], then press 
< 0 >.
 1  images will be...

193
R Processing RAW Images with the Camera N
Displaying the setting screen
Press < 0> to display the setting 
screen. Turn the < 5> or  dial 
to change the setting. To return to the 
screen in step 3, press < 0>.
 4Save the image.
 Select [ W] (Save), then press < 0>.
 Select [ OK] to save the image.
 Check the destination folder and 
image file number, then select [ OK].
 To process another image, repeat 
steps 2 to 4.
 Press the < M> button to return to 
the menu.
You can magnify the image by...

194
R Processing RAW Images with the Camera N
 White balance (p.72)
You can select the white balance. If you select [ P], turn the < 6> 
dial to set the color temperature  on the setting screen. The displayed 
image will reflect the setting’s effect.
  Picture Style  (p.66)
You can select the Picture Style. To set the parameters such as 
Sharpness, press < 0> to display the setting screen. Turn the 
< 6 > dial to select the Picture Style. Turn the < 5> dial to select a 
parameter to be adjusted, then...

195
R Processing RAW Images with the Camera N
 Color space  (p.86)
You can select either sRGB or Adobe RGB. Since the camera’s LCD 
monitor is not compatible with  Adobe RGB, the image will not look 
very different when either color space is set.
  Peripheral illumination correction  (p.78)
If [ Enable] is set, the corrected image will be displayed. If the effect 
is difficult to discern, press the < u> button to magnify the image 
and check the corners. (Press the < I> button to return to the 
normal...

196
R Processing RAW Images with the Camera N
 Chromatic aberration correction
When [Enable] is set, lateral chromatic aberration caused by the 
lens (color fringing al ong the subject’s outline) can be corrected. If 
[Enable] is set, the corrected image will be displayed. (The image 
periphery will also be slightly cr opped.) If the effect is difficult to 
discern, press the < u> button to magnify the image. (Press the 
< I > button to return to the normal view.) The chromatic 
aberration correction...

197
You can resize an image to make the pixel count lower and save it as a 
new image. Resizing an image is possible only with JPEG 3/4  
images.  JPEG 6 and RAW images cannot be resized.
1Select [Resize].
 Under the [3 ] tab, select [Resize], 
then press < 0>.
 The images will be displayed.
2Select an image.
 Turn the < 5> dial to select the 
image you want to resize.
 By pressing the < I> button, you 
can switch to the index display and 
select an image.
3Select the desired image size.
 Press < 0>...

198
S Resize
Resize Options According to Original Image Size
Original Image SizeAvailable Resize Settings
46
3 kk
4
k 

199
10
Sensor Cleaning
The camera has a Self Cleaning Sensor Unit attached 
to the image sensor’s front layer (low-pass filter) to 
shake off dust automatically. 
The Dust Delete Data can also be appended to the 
image so that the dust spots remaining can be erased 
automatically by Digital Photo Professional (provided 
software).
About smear adhering to the front of the sensorBesides dust entering the camera from outside, in rare cases lubricant 
from the camera’s internal parts may adhere to the front...

200
Whenever you set the power switch to  or , the Self 
Cleaning Sensor Unit operates to aut omatically shake off the dust on 
the front of the sensor. Normally, you need not pay attention to this 
operation. However, you can execute t he sensor cleaning at anytime as 
well as disable it.
1Select [Sensor cleaning].
Under the [6 ] tab, select [Sensor 
cleaning ], then press < 0>.
2Select [Clean now f].
Turn the < 5> dial to select [ Clean 
now f], then press < 0>.
 Select [ OK] on the dialog screen,...