Canon Eos 1 Instruction Manual

111
Specifications
(2) Manual compensation: ±3 stops in 1/3-stop increments, by independent
operation of quick control dial or combination of
exposure compensation button + main dial; can be
used together with AEB.
AE Lock: (1) Auto AE lock: 
AE lock occurs simultaneously with AF completion in
one-shot AF mode with evaluative metering.
(1) Auto AE lock. During One Shot autofocus and
evaluative metering, AE locks when focusing is achieved.
(2) Manual AE lock:  Possible in all metering modes by pressing AE...

112
Specifications
(3) Manual focusing: Possible by setting the lens’ focus mode switch to “M”
and operating the lens’ manual focusing ring. In-focus
indicator lights up when focus is achieved (with EF
lenses having maximum aperture of f/5.6 or larger).
Manual focusing with the electronic ring is enabled
during exposure and continuous shooting.
AF Working Range:  EV 0 ~ 18 (ISO 100).
■SHUTTER
Type:  Vertical-travel, focal plane shutter with all speeds elec-
tronically controlled....

113
Specifications
P(program AE)
Tv (Shutter-
priority AE)
Av (Aperture-
priority AE)
M (Manual 
exposure) X-sync shutter speed
Shooting mode
Automatically set to 1/60
~ 1/250 sec. based on A-
TTL or TTL program
Manually set to any shut-
ter speed of 1/250 or
slower.*
Automatically set
between 30 sec. and
1/250 sec. according to
ambient light level and
set aperture value.
Manually set to any shut-
ter speed of 1/250 or
slower. Aperture value
Automatically set acord-
ing to A-TTL or TTL pro-
gram...

(7) Manual focusing using the electronic manual focusing
ring,(8) Selection of center-weighted average metering,
(9) AEB shooting sequence, (10) Cancellation of super-
imposed focusing points, (11) Focusing point selection
method, (12) Mirror up photography, (13) Spot metering
linked to focusing points, (14) flash output control.Except for custom function No. F-12, same as in the
EOS-1 N.
F-12 set to “0”: No beeping when autofocusing is
achieved in the A mode.
F-12 set to “1”: Beeping when autofocusing...

115
Film related
Quick Guide to EOS-1 N Functions
Make sure the main switch is set to “A” before performing the following
operations:
DRIVE
CF
AEB0
Check the battery
level 
(refer to page 15)
Power source related
Focus related
ISOCheck the set film
speed 
(refer to page 22)
Take pictures in
rapid sequence 
(refer to page 67)
AL
Rewind the film in
mid-roll 
(refer to page 25)
Select the focusing
point 
(refer to page 29)
AF
ISOMODEU
LTR
AS
OUM
DRIVE
CLEAR
CF
AEB
U LTR
AS
OUM
U LTR
AS
OUM
00.  Part.7  RS...

116
Quick Guide to EOS-1 N Functions
AI SERVO
ONE SHOT
AF
M
CANONLENS
LE
S
NEFN
O5 0m
m1
:
14
Select the AF
mode 
(refer to page 32)
Focus the subject
manually 
(refer to page 36)
Select the shooting
mode 
(refer to page 48)
Select the metering
mode 
(refer to page 37)
Compensate the
exposure 
(refer to page 42•44)
0
P
AF
ISOMODEU
LTR
AS
OUM
MODE
AF ISOAF
M
22 2250mm
NAF
M
AF
ISOMODEU
LTR
AS
OUM
ONE SHOT
321123
     P
0
AF
ISOMODEU
LTR
AS
OUM
Focus related
Exposure related
00.  Part.7  RS (E)...

117
Quick Guide to EOS-1 N Functions
Use AE lock to
lock the exposure
reading 
(refer to page 40)
AEB3211230
3211230
Take multiple
exposures on one
frame 
(refer to page 63)
Use automatic
exposure bracket-
ing 
(refer to page 45)
Compensate the
flash exposure 
(refer to page 78)
Use the self-timer (refer to page 70)
DRIVE
CLEAR
CF
AEB
U LTR
AS
OUM
DRIVE
CLEAR
CF
AEB
U LTR
AS
OUM
AF
ISOMODE
A
100
210
AF
ISOMODEU
LTR
AS
OUM
Exposure related
Photographic applications
00.  Part.7  RS (E)  (P.106~120)...

118
Quick Guide to EOS-1 N Functions
ULTR
AS
OUM
ONE SHO
ONE SHOT
Illuminating the
LCD panel 
(refer to page 74)
Reset all functions
(clear button)
[except for custom
functions]
(refer to page 75)
DRIVE
CLEAR
CF
AEB
Set a custom
function 
(refer to page 82)
3211230
Check the current
custom function
settings 
(refer to page 83)
Reset all custom
functions at once
(refer to page 75)
DRIVE
CLEAR
CF
AEBDRIVE
CLEAR
CF
AEB
DRIVE
CFAEB
DRIVE
CLEAR
CF
AEB
Photographic applications
Custom functions
DRIVE
CLEAR
CF...

119
This device complies with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference\
received, including interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless
otherwise specified in the instructions. If such changes or modifica-
tions should be made, you could be required to stop operation of the
equipment.
This...

CT1 - 1104 - 007CCANON INC. 1995 PRINTED IN JAPAN
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC. 
For all inquiries concerning this camera, call toll free in the U.S. 1-8\
00-828-4040
or write to:  Customer Relations, Canon U.S.A., Inc.
One Canon Plaza, Lake Success, N.Y. 11042-1198
CANON CANADA INC. HEADQUARTERS6390 Dixie Road, Mississauga, Ontario L5T 1P7, CanadaCANON CANADA INC. MONTREAL BRANCH5990, Côte-de-Liesse, Montréal Québec H4T 1V7, CanadaCANON CANADA...