Canon Eos 1 Instruction Manual

61
5. Bulb Exposure [ ]
The shutter stays open for as long as you press the shutter button. By
connecting the optional Remote Switch 60T3 to the camera’s remote con\
-
trol socket, you can keep the shutter open without holding the shutter b\
ut-
ton pressed. Use this mode when long exposures are required, such as
for pictures of night scenes and fireworks displays.     
2Release the shooting mode selec-
tor.
3Set the quick control dial switch to.
AFISOMODE
ONE SHOT
1While pressing the shooting
mode...

62
•In bulb exposure mode, the LCD panel’s frame counter display counts t\
he elapsed time
from when the shutter was released, starting over every 30 seconds. One \
battery check
bar ( ) appears on the display after every 30 seconds, allowing time measurem\
ent
up to 120 seconds using all three bars.
• This camera’s bulb exposure operation is designed to consume very lit\
tle power, realiz-
ing virtually no drain on the battery.
• LCD panel illumination is turned off during bulb exposure operation.    \...

63
Up to nine exposures can be made on
one frame by presetting the number of
multiple exposures with the main dial.
Multiple exposures are possible in any
shooting mode.
1Press the shooting mode selector
and metering mode selector/flash
exposure compensation button at
the same time.
•“”appears in the LCD panel and
“”  appears in the frame counter.
This number indicates the number of
preset multiple exposures.    
2Turn the main dial to set the desired
number of preset multiple expo-
sures.
• To cancel,...

64
3Release the shooting mode selector
and metering mode selector/flash
exposure compensation button.
4Select a shooting mode and take
the desired number of exposures.
5When the preset number of multiple
exposures is completed, the film
automatically advances to the next
frame.     
Multiple Exposures [ ]
• Three exposures are set
•When the preset number of multiple exposures is completed, the film auto\
matically
advances to the next frame and multiple exposure mode is canceled.
•“ ” blinks in the LCD...

65
IV  Configuring the Camera
This section describes how to change vari-
ous camera settings such as the film speed
and film winding and rewinding modes, allow-
ing you to precisely configure the camera for
specific shooting situations.
•First make sure the cameras main
swich is set to “ A” or “ ”
A
L
00.  Part.4  RS (E)  (P.65~75)   27-01-2003   11:59   Page  65 

66
1. Manually Setting the Film Speed
The film speed can be set manually when using non-DX film or when you
wish to set a film speed other than the DX-coded film speed.
•Set the film speed after loading the film.
• The manual film speed setting range is ISO 6~6400. When using DX film, t\
he
automatic film speed setting range is ISO 25~5000.      
1While simultaneously pressing the AF
mode selector and metering mode
selector/flash exposure compensa-
tion button, turn the main dial to the
left or right...

67
2. Changing the Film Winding Mode
Two film winding modes are available: single exposure mode and continu-
ous exposure mode.
●Single Exposure ( )
The film advances one frame after each picture is taken. After taking a \
picture,
return the shutter button to the half-pressed position to prepare for th\
e next expo-
sure while keeping the exposure value locked (possible only when camera\
 is set to
One-shot AF and evaluative metering mode).
●Continuous Exposure ( )
Pictures are taken continuously at a...

One-shot/Manual AI Servo
Continuous exposure ( ) approx. 3 fps approx. 2.5 fps
68
Changing the Film Winding Mode
2Turn the main dial to the left or right
until the desired film winding mode
is displayed in the LCD panel.
3To complete the setting, press the
shutter halfway or wait until the six-
second timer elapses.     
Film Winding Automatic Gear Switching Function
If film winding becomes an excessive burden to the camera due to a sharp\
 drop in battery
capacity (which can occur when shooting in a...

69
High-speed rewinding starts automatically at the end of the
roll.
Rewinding does not start automatically at the end of the roll
and starts when the film rewind button ( ) is pressed.
Silent rewinding starts automatically at the end of the roll.
Rewinding does not start automatically atthe end of the roll.
Silent rewinding starts when the film rewind button ( ) is
pressed.       
3. Changing the Film Rewinding Mode
In normal operation at the end of the roll, the camera automatically
rewinds the film at...

70
4. Using the Self-Timer [ ]
Two built-in self-timer modes let you delay the exposure 10 seconds or 2\
seconds from when you press the shutter button. When using the self-
timer, place the camera on a tripod or a steady surface.     
DRIVE
CLEAR
AEB1Open the palm door and press the
film winding mode selector.
• The film winding mode indicator
appears in the LCD panel.
• After the button is released, the timer
function keeps the film winding mode
indicator displayed in the LCD panel
for six seconds....