Canon Eos 1 Instruction Manual

Custom Function Chart
91
Focusing point selector ( ) + main dial
Exposure compensation button ( ) +
main dial
Independent operation of quick control
dial, or exposure compensation button
() + main dial.
Normal operation.
Mirror up operation.
No beeping when the subject is in focus.
Beeps when the subject is in focus.
Fine spot metering in center of image
area.
Spot metering linked to the manually
selected focusing point.
Automatic flash output reduction control
active.
Automatic flash output reduction...

92
Custom Function Chart
●Combined Use of Custom Functions F-5 and F-11
When custom functions F-5 and F-11 are combined, shutter speed and
aperture value settings are carried out as shown in the following table.\
Shutter speed:
Set by main dial
Aperture value: 1) Set by quick control dial or
2) Set by exposure com-
pensation button ( )
and main dial
Shutter speed: Set by main dial
Aperture value: 1) Set by quick control dial or
2) Set by focusing point
selector ( ) and main
dial
Shutter speed: Set by...

Additional Information for the EOS-1 N DP Model
93
A combination of the EOS-1 N with the compact Battery Pack BP-E1 pro-
vides a switch that lets you power the camera either from the standard
2CR5 lithium battery stored in the grip or from four AA-size (LR6) alk\
aline-
manganese or Ni-Cd batteries housed in the battery pack. This dual pack
(DP) system lets you use AA-size batteries during normal temperature
shooting and switch to the 2CR5 lithium battery when shooting in cold
conditions. Moreover, the...

94
Additional Information for the EOS-1 N DP Model
3Press the Battery Pack BP-E1’s bat-
tery magazine release button and
remove the battery magazine.
L
A
4Insert four AA-size batteries into the
battery magazine as shown in the
diagram.
5Insert the battery magazine into the
Battery Pack BP-E1.
•
The release button automatically holds
the battery magazine in place.
6Reattach the Battery Pack BP-E1 to
the camera as shown in the dia-
gram, then turn and tighten the
Battery Pack BP-E1’s attachment
knob.
00....

2. Shooting Capacity
•Data based on Canon’s Standard Test Method using new batteries, EF50m\
m
f/1.4 USM lens and 24-exposure film. Values in parentheses are for 36-ex\
po-
sure film.
• Repeated autofocus operation without taking any pictures will reduce the\
 overall
shooting capacity.       
95
1. Power Source Selector
Use the power source selector to select the desired power source. The
relationship between the selector and power source is as follows:    
Additional Information for the EOS-1 N DP...

96A combination of the EOS-1 N with the Power Drive Booster E1 expands
the choice of film winding modes to three and benefits from higher shoot\
-
ing capacity (refer to page 98). Moreover, the EOS-1 N HS is designed \
for
improved operability with features such as a separate shutter button and\
AE lock button ( ) for vertical shooting.
Power is supplied by eight AA-size alkaline-manganese batteries (or AA-\
size Ni-Cd or AA-size lithium batteries*), or by the optionally availab\
le Ni-
Cd Pack E1 and...

97
1. Vertical Position Shooting
To use the vertical shutter button and AE lock button set the vertical c\
on-
trol switch to the ON position (red dot showing).
2. Film Winding Modes
●
Single Exposure ( )
The film advances one frame after each picture is taken. After taking a
picture, return the shutter button to the half-pressed position to prepa\
re
for the next exposure.
● Low-Speed Continuous Exposure ( )
Pictures are taken continuously at a rate of up to approx. 3 frames per
second as long as the...

4. Shooting Capacity
•Data based on Canon’s Standard Test Method using new batteries, EF50m\
m
f/1.4 USM lens and 24-exposure film. Values in parentheses are for 36-ex\
po-
sure film.
• Repeated autofocus operation without taking any pictures will reduce the\
 overall
shooting capacity.
98
Additional Information for the EOS-1 N HS Model
Power source
Temperature
Shooting capacity by battery type (rolls)
Normal (+20°C / 68°F)
Low (–20°C / –4°F) 100 (65)
6 (4)
AA-size alkalineNi-Cd Pack E1Size AA lithium...

@@jA›¤»Œ“
¯
[dA“ A`MA
AV[g
 ¨¢¯›
‡¢B@
99
Attaching the Standard Grip
The Battery Pack BP-E1 or Power Drive Booster E1 can be removed and
replaced with the EOS-1 N’s standard grip GR-E1 (optional) using th\
e
procedure below.
1Load a battery into the standard grip
GR-E1 (see page 14).
2Turn the Battery Pack BP-E1/Power
Drive Booster E1’s attachment knob
to loosen, then pull the assembly
downward to remove from the cam-
era.
For EOS-1 N HS users, attach the
booster coupler cover (supplied with
the GR-E1)...

100
Additional Information for the EOS-1 N RS Model
In addition to all the features of the EOS-1 N, the EOS-1 N RS also has \
a
fixed, hard-coat, new pellicle mirror, a  high-speed motor drive, and th\
e
RS mode. The EOS-1 N RS is a single-lens reflex camera having the
fastest AF (autofocus) operation.
Major Features of the EOS-1 N RS
■In the RS mode, the short shutter release time lag of 0.006 sec. helps
you capture the decisive moment more easily.
■ A high-speed continuous shooting speed of 10 frames...