Canon Digital Ixus Wireless User Guide

109
  Troubleshooting
Subject in recorded image is too bright.
Subject is too close, 
making the flash too 
strong.z
Shoot within correct shooting 
distance of the subject when using 
the built-in flash  (p. 128).
Subject is bright in 
contrast to the 
background. z
Set the exposure compensation to a 
negative (-) setting  (p. 56).
z Use AE lock or use the spot 
metering  function (pp. 
53, 55).
Too much light is shining 
directly into the camera, 
or is being reflected off 
the subject. z
Change the...

110
Eyes appear red.
Light reflecting back from 
eyes can make them 
appear red when the 
flash is used in dark 
areas.zUse the   (auto with red-eye 
reduction) mode (Basic Guide p. 9). 
For this mode to be effective, the 
subject must be looking right at the 
red-eye reduction lamp. Try asking 
them to look directly at the lamp.
zEven better results can be obtained 
by increasing the lighting in indoor 
settings or approaching closer to the 
subject. The shutter will not activate 
for approximately 1...

111
  Troubleshooting
Shooting Movies
The recording time may not display properly 
or filming may stop unexpectedly.
The following types of 
memory cards are used.
- Slow recording cards.
- Cards formatted on a 
different camera or a 
computer.
- Cards which have had 
images recorded and 
erased repeatedly.zAlthough the recording time may not 
display properly during shooting, the 
movie will be recorded correctly on 
the memory card. Recording time 
will display properly if you format the 
memory card...

112
Playback
Cannot play back.
You attempted to play 
back images shot with 
another camera or 
images edited with a 
computer.zComputer images that cannot be 
played back will play back if they are 
added to the camera using the 
supplied software program 
ZoomBrowser EX or ImageBrowser.
File name was changed 
with a computer or file 
location was changed.zSet the file name or location on the 
file format/structure of the camera 
(Refer to the Software & Wireless 
Guide for details).
Movies cannot be...

113
  Troubleshooting
Reading images from memor y card is slow.
Memory card was 
formatted in another 
device.zUse a memory card formatted in 
your camera (p. 28).
Batter y/Batter y Charger
Batter y consumed quickly.
Battery life exceeded if 
battery loses its charge 
quickly at normal 
temperature 
(23 °C/73 °F).zReplace the battery with a new one 
(Basic Guide p. 2).
Batter y will not charge.
Battery life exceeded.zReplace the battery with a new one 
(Basic Guide p. 2).
TV monitor output
Image not...

114
Wireless connection to a printer
Wireless connection to a printer is not 
possible.
You have not attached 
the wireless print adapter 
to the printer.zAttach the wireless print adapter to 
the printer (p. 98).
Your printer is not a 
Canon PictBridge 
compliant printer.zWhen using a wireless connection 
between the camera and printer, 
ensure you are using a Canon 
PictBridge compliant printer (p. 98).
You have not attached 
the compact power 
adapter to the wireless 
print adapter.zIf you are using a...

115
  List of Messages
List of Messages 
• Duri ng shoot ing, pl ayback,  or 
wireless connection to a printer

116
Change the battery pack.
zBattery charge is insufficient to operate the camera. Replace it at 
once with a charged one or recharge the battery.
No image.
zNo images recorded on memory card.
Image too large.
zYou attempted to play back an image larger than 4992 × 
3328 pixels or with a large data size.
Incompatible JPEG format.
zYou attempted to play back an incompatible JPEG image.
Corrupted Data.
zYou attempted to play back an image with corrupted data.
RAW
zYou attempted to play back a RAW image....

117
  List of Messages
Cannot register this image!
zYou attempted to register an image recorded in a different 
camera or a movie as a start-up image.
Protected!
z You attempted to erase or edit a protected image, movie or 
sound memo.
To o  m a n y  m a r k s .
z Too many images have been marked with print settings, transfer 
settings or slide show settings. Cannot process any more.
Cannot complete!
z Could not save the print, transfer or slide show settings.
Unselectable image.
zYou attempted to set...

118
Disconnected
zWireless connection has disconnected. Either shorten the 
distance between the camera and the wireless print adapter; 
change the orientation of the camera or the angle of the wireless 
print adapter; or change the channel settings. Then establish a 
wireless connection again.
Too many devices registered
z8 target devices are already registered. If you wish to register 
additional devices, use [Delete Registration] to delete target 
devices you no longer use.
Registration failed...