Canon Digital Ixus 990 Is User Guide

* Editing
101
Summary for “1 Viewing Movies” (p. 34)
You can trim the beginnings and ends of recorded movies in one-second 
increments.
Select *.
●Follow Steps 1 to 3 on p. 34, select * and 
press the m button.
XThe movie editing panel and the movie 
editing bar will display.
Set the editing range.
●Press the op buttons and select   or 
.
●Press the qr buttons or turn the  dial 
to move  .   will display at each one-
second interval. If you select  , you can 
trim the beginning of the movie from  . If...

* Editing
102
XEven if you move  to a point other than a 
 point, only the portion from the nearest 
 to the left will be trimmed when   is 
selected. Only the portion from the 
nearest   to the right will be trimmed 
when   is selected.
XThe section selected with   will be the 
section of the movie that remains after 
editing. 
Check the edited movie.
●Press the op buttons to select  , then 
press the m button. The edited movie will 
play.
●To edit the movie again, repeat Step 2.●To cancel editing,...

103
Using Playback and Other
Functions
The first part of this chapter explains various ways to play back and 
edit images. The latter part explains how to specify images for printing.
•Press the 1 button to select the Playback mode before operating the 
camera.
•It may not be possible to play back or edit images that have been edited 
on a computer, had their file name changed, or have been taken on a 
different camera.
•The edit function (pp. 121 – 125) cannot be used if the memory card 
does not have...

104
Searching Images Using Index Display
Displaying multiple images at a time lets you quickly find the image you 
want.
Move the zoom lever toward g.
XImages will display in an index.●Move the zoom lever toward g to 
increase the number of images. The 
number of images increases each time 
you move the lever. 
●Move the zoom lever toward k to reduce 
the number of images. The number of 
images will reduce each time you move 
the lever. 
Change the displayed images.
●Turn the  dial to switch to the next...

Quickly Searching Images
105
Searching Images Using the Control Dial
Turn the control dial to quickly search images. You can also jump by the 
shooting date.
Select an image.
●If you set the single image playback and 
turn the  dial quickly, the images will 
display as shown on the left.
●If you press the op buttons, you can 
search images by the shooting date.
●Pressing the m button restores the single 
image playback.
 

106
When there are many images on the memory card, you can filter and display 
them by a specified condition. You can also delete (p. 112) or protect 
(p. 116) all images at once in the filtered condition.
Setting the Conditions
Select .
●Press the m
 button to select  , then 
press the 
m button.
Select a condition.
●Press the op buttons or turn the  dial 
to select a condition, then press the m 
button.
View the filtered images.
●Press the op buttons or turn the  dial 
to select a condition for...

. Viewing Slideshows
107
You can use the following functions in filt ered playback for processing the filtered 
images at once.
• “/  Erasing Images”  (p. 29), “. Viewing Slideshows”  (p. 107), “:  Protecting 
Images”  (p. 116), “Selecting Images for Printing (DPOF)”  (p. 127)
You can automatically play back images recorded to a memory card. Each 
image displays for approximately 3 seconds.
Select ..
●Press the  m
 button to select  ., then 
press the  m button.
XThe slideshow will start a few seconds...

. Viewing Slideshows
108
Changing Settings
You can change the time that slideshow images are displayed, transition 
effects and set the slideshow to repeat. You can select from seven transition 
effects when switching between images.
Select [Slideshow].
●Press the n button and select the 1 
tab, then select [Slideshow] and press the 
m button.
Make the setting.
●Press the op buttons or turn the  dial 
to select an item, then press the qr 
buttons to adjust the setting.
●If you select [Start] and press...

109
You can magnify the area of a recorded image that was inside the AF frame 
or the area of a face that was detected to check the focus.
Press the l button, and switch 
to the focus check display (p. 45).
XA white frame will appear where the AF 
frame or face was when the focus was 
set.
XA gray frame will appear on a face 
detected during playback.
XThe area within the orange frame appears 
magnified.
Change the magnification level or 
location.
●Move the zoom lever toward k once.
●Use the zoom lever...

110Move the zoom lever toward k.
●The display will zoom in on the image and, 
if you continue to hold the zoom lever, it 
will continue to zoom in up to a factor of 
10x.
●If you press the opqr buttons, you can 
move the location of the displayed area.
●Move the zoom lever toward g to zoom 
out or return to Single Image Playback.
●If you turn the  dial, you can switch 
images in the zoomed state.
You can select from three transition effects when switching between images 
in single image playback.
Select...