Canon Digital Ixus 990 Is User Guide

91
When the camera detects that there is a possibility that people have their 
eyes shut,   appears.
Select [Blink Detection].
●Press the n button, select the 4 
tab, and then select [Blink Detection]. Use 
the qr buttons to select [On].
Shoot.
●When a person with shut eyes is detected, 
a frame and   appear for a few seconds.
Checking for Shut Eyes
In W,  and $ mode, the function is only available for the last image 
shot.
 

92
You can set the shutter speed to a range between 1 and 15 seconds to 
shoot long exposures. However, you should attach the camera to a tripod to 
prevent the camera from moving and blurring the image.
Select ≈.
●Set the mode switch to 4, then select ≈ 
in Steps 1 – 3 on p. 47 and press the m 
button.
Select the shutter speed.
●Press the o button.
●Press the qr buttons or turn the 
 dial 
to select shutter speed, then press the m 
button.
Confirm the exposure.
●When you press the shutter button...

93
You can change the look of an image when shooting. However, the shooting 
conditions may cause the image to become coarse, or the colors may not 
come out as expected.
T Color Accent
You can select to retain a single color and change the rest to black and white 
in a composition.
Select T.
●Follow Step 2 on p. 56 to select T.
Press the l button.
●The unchanged image and the Color 
Accent image will both display.
●The color for default settings is green.
Specify the color.
●Position the center frame so...

Changing the Color and Shooting
94
Y Color Swap
You can swap one color in an image for another when recording it. You can 
only swap one color.
Select Y.
●Follow Step 2 on p. 56 to select Y.
Press the l button.
●The unchanged image and the Color 
Swap image will both display.
●The default setting is to change green to 
gray.
Specify the color to be swapped.
●Position the center frame so it is filled with 
the color you want and press the q button.
XThe specified color will be recorded.
Specify the target...

Changing the Color and Shooting
95
Specify the range of colors to be 
swapped.
●Press the op buttons or turn the  dial 
to adjust the range of colors affected.
●Select a negative value to limit the range 
of colors. Select a positive value to extend 
the range of colors to similar colors.
●Pressing the l button accepts the 
setting and restores the shooting screen.
•Using the flash may cause unexpected results in this mode.
•The recorded color and range of colors will be saved even if you turn off 
the...

96
Large subjects can be split into several shots that can later be merged together 
using the included software on a computer to create a panoramic image.
Select x or v.
●Follow Step 2 on p. 56 to select x or v.
Take the first shot.
XThe exposure and white balance will be 
set with the first shot.
Take subsequent shots.
●Overlap part of the first shot when taking 
the second shot.
●Minor discrepancies in the overlapping 
portions will be corrected when the 
images are merged.
●You can repeat the...

97
Using Various Functions for
Shooting Movies
This chapter provides more advanced information than the 
“EShooting Movies” and “1 Viewing Movies” sections of Chapter 1.
•This chapter assumes that the mode switch is set to E.
6
 

98
You can select between three movie modes.
Set the mode switch to E.
Select a movie mode.
●After pressing the m button, press the 
op buttons or turn the  dial to select 
E, then press the m button.
●Press the op buttons or turn the  dial 
to select a mode, then press the m 
button.
You can select between three image quality settings.
Select the image quality.
●After pressing the m button, press the 
op buttons or turn the  dial to select 
, then press the m button.
Select an option.
●Press the qr...

AE Lock/Exposure Shift
99
Image Quality Table 
Estimated Shooting Times 
You can set the exposure or change it in 1/3 steps within a range of ±2.
Focus.
Lock the exposure.
●Press the o button to lock the exposure. 
The exposure shift bar appears.
●Press the o button again to release the lock.
Change the exposure.
●While watching the screen, turn the  
dial to adjust the brightness.
Shoot.
Image Quality
(Recording Pixels/Frame Rate)Content
1280 × 720 pixels, 30 frames/sec.  For shooting high-definition...

100
The following functions can be used in the same way as for still images. For 
> and z modes, the functions with an * attached can be used in the same 
way as for still images.
•Zooming in More Closely on Subjects (Digital Zoom) (p. 60)
You can use the digital zoom, but the optical zoom cannot be used. If you want 
to shoot at the maximum zoom factor, you should adjust the optical zoom to the 
maximum before shooting.
The sound of the zoom will be recorded.
•Ò Using the Self-Timer (p. 63)*
•e Shooting...