Canon Digital Ixus 310 Hs User Guide

171
If you set the mode switch to 4, and the mode to  G, you can change the 
settings in the  4 tab  (p. 47) .
Turning Off the  AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when 
you press the shutter button halfway. You can turn off the lamp.
zChoose [AF-assist Beam], then touch  qr 
to choose [Off].
Turning Off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that 
occurs when shooting in dark...

Changing Shooting Function Settings
172
Changing the Image Display Time Right After 
Shooting
You can change the length of time the images display right after shooting.
zChoose [Review], then touch qr to 
choose an option.
Changing the Way the Image Displays Right After 
Shooting
You can change the way the image displays right after shooting.
zChoose [Review Info], then touch  qr to 
choose an option.
Displaying Grid Lines
You can display grid lines on the screen for vertical and horizontal guidance...

Changing Shooting Function Settings
173
Changing the IS-Mode Settings
zChoose [IS Mode], then touch qr to 
choose an option.
Grid lines will not be recorded on the image.
Continuous Image stabilization is always on. 
You can confirm the effects 
directly on the display, which 
makes it easier to check the 
composition or focus.
When shooting movies, the 
camera also reduces strong 
camera shake, for example when 
walking (Dynamic mode).
Shoot Only* Image stabilization is only active 
at the moment of...

Changing Shooting Function Settings
174
Changing Icon Order (Icon Layout)
You can add icons to the shooting screen, or change their arrangement.
Adding Icons
Display the settings screen.
zIn a shooting screen, touch and hold one of 
the icons.
zWhen [Changes which icons appear and 
their positions] appears, lift your finger off 
the screen once, then touch the center of 
the screen.
XThe setting screen shown to the left will 
appear.
Add an icon.
zDrag the desired icon that appears in the 
center of the...

Changing Shooting Function Settings
175
Rearranging Icons
zDrag the desired icon that appears in the 
layout screen in Step 1 on p. 174 to the 
position you want.
XThe icon will exchange places with any 
existing icon in that position.
Removing Icons
zWhen in the layout screen that appears in 
Step 1 on  p. 174, drag the icon you want to 
remove to the center and then to   that 
will appear on the lower part of the screen.
zIf you drag an icon that cannot be 
removed,   will not appear.
Preset Layouts...

176
You can adjust the settings in the 1 tab by pressing the  1 button  (p. 47).
Turning Off Active Display
You can turn off Active Display  (pp. 29, 127)  so that gently tapping the side 
of the camera or tilting the camera does not cause images to switch.
zChoose [Active Display], then touch  qr to 
choose [Off].
Choosing the Image that First Displays in 
Playback
zChoose [Resume], then touch  qr to 
choose an option.
Turning Off the Auto Rotate Function
When you play back images on the camera, images...

177
Useful Information
This chapter introduces how to use the AC adapter kit and Eye-Fi card 
(both sold separately), troubleshooting tips, and contains lists of 
functions and items that appear on the screen.
11
 

178
If you use AC Adapter Kit ACK-DC40 (sold separately), you can use the 
camera without worrying about how much charge is left in the battery.
Turn off the camera.
Insert the coupler.
zFollow Step 2 on p. 17 to open the cover, 
then insert the coupler as shown until it 
locks into place with a click.
zFollow Step 5 on  p. 18 to close the cover.
Plug the cord into the coupler.
zOpen the cover and fully insert the plug 
into the coupler.
Connect the power cord.
zConnect the power cord to the compact...

179
Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is 
authorized in the country or territory of use (p. 17).
When you put a prepared Eye-Fi card into the camera, you can automatically 
transfer your images wirelessly to a computer, or upload them to a web 
service.
Image transfer is a function of the Eye-Fi card. For details on how to setup 
and use the card, and concerning problems transferring images, please refer 
to the Eye-Fi card user guide, or contact the manufacturer.
If...

Using an Eye-Fi Card
180
Checking Connection Information
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
zTouch ø, then n  to choose the 
3  tab, and touch [Eye-Fi Settings].
zTouch [Connection info], then touch 
[Connection info] again.
XThe connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
zTouch  ø, then n  to choose the 
3  tab, and touch [Eye-Fi...