Canon Digital Ixus 310 Hs User Guide

Quickly Searching Images
121
Searching Images by Scrolling
Dragging across the screen will display images in a line letting you quickly 
search them. You can also jump by the shooting date (Scroll Display).
Choose an image.
zYou can switch between images in single 
image playback by dragging across the 
screen.
Continuously dragging quickly across the 
screen will display the screen on the left 
(Scroll Display).
In this display, drag across the screen to 
choose images.
zTouching the center image...

Quickly Searching Images
122
Viewing Movies Made with Movie Digest
You can select movies made in   mode (p. 67) by date for viewing.
Choose .
zAfter touching  ø, drag the menu 
appearing on the left side of the screen up 
or down to choose  , then touch the 
menu item again.
Choose a movie date.
zTouch a date to choose it.
Play the movie.
zTouch the date chosen in Step 2.XThe movie will play.
 

123
When there are many images on the memory card, you can filter and display 
them by a specified filter. You can also protect (p. 137) or delete  (p. 139) all 
images at once while filtered.
Choose  ‚.
zTouch  ø, then drag up or down the 
menu to the left to choose  ‚.
Choose a filter.
zTouch an item you want to set.zIf you drag up or down the menu on the 
right, other items will appear.
zTouch the item you chose again to 
complete the setting.
View the filtered images.
zTouch the desired filter, then...

Viewing Slideshows
124
You can automatically play back images recorded to a memory card. Each 
image displays for approximately 3 seconds.
Choose ..
zAfter touching  ø, drag the menu 
appearing on the left side of the screen up 
or down to choose  ., then touch the menu 
item again.
Choose a transition effect.
zTouch an effect to choose it.zTouch the menu item again to complete 
the setting.
XThe slideshow will start a few seconds 
after [Loading image...] appears.
zIn filtered playback  (p. 123), only...

Viewing Slideshows
125
Changing Settings
You can set a slideshow to repeat, or change transition effects and the time 
that slideshow images are displayed. You can choose from 6 transition 
effects when switching between images.
Choose [Slideshow].
zTouch ø, then n  to choose the 
1  tab, and touch [Slideshow].
Choose a setting.
zTouch an item, then touch  qr to make the 
setting.
zIf you touch [Start], the slideshow starts 
with your settings.
zTouching the screen during playback will 
restore the menu...

126
You can magnify the area of a recorded image that was inside the AF Frame 
to check the focus.
Touch l to switch the focus 
check display  (p. 44).
XA white frame will appear where the AF 
frame was when the focus was set.
XA gray frame will appear on a face 
detected during playback.
XThe area within the orange frame appears 
magnified.
Switch frames.
zTouch the lower right image, or move the 
zoom lever toward  k once.
XThe screen shown on the left will appear.zTouch   to move to a different frame...

127
Magnify an image.
zWhen you touch the screen, the image will 
magnify and   and   will appear.
zIf you keep your finger on the screen, the 
display will continue to zoom on that part of 
the image up to a factor of 10x.
zYou can also zoom in or out on images by 
touching  or .
If you touch and hold   or  , the 
display will continue zoom in or out on the 
image.
zIf you drag across the screen, you can 
move the location of the displayed area.
zTouch Ú to restore single image playback.zYou can also...

128
Grouped images taken in   mode (p. 80) can also be viewed individually.
Choose an image group.
zDrag left or right across the screen to 
choose an image that displays  , then 
touch .
View each image in the group.
zIf you drag left or right across the screen 
only the images in the group will be 
displayed.
zTouch  Ú to exit group playback.
Viewing Each Image in a Group
Group playback
In group playback (Step 2 above), you c an use the FUNC. menu functions that 
appear when you touch  ø, as well as...

Viewing Each Image in a Group
129
Ungrouping Images
Grouped images taken in   mode can be ungrouped and viewed 
individually.
Choose [Group Images].
zTouch ø and then  n to choose 
[Group Images] in the  1 tab.
Choose a setting.
zTouch  qr to choose [Off].zTouch  Ú to complete the setting and 
restore single image playback.
XGrouped images taken in   mode are 
ungrouped and appear individually.
zTo regroup the images, follow the steps 
above and select [On].
Grouping cannot be canceled while viewing...

130
The camera will choose four images based on the displayed image.
If you choose one of those images, the camera will select four more images
letting you enjoy playing back images in an unexpected order.
This will work best if you take many shots of various scenes.
Choose .
zTouch ø, then drag up or down the 
screen to choose  .
XFour images will appear as possibilities.
Choose an image.
zTouch the image you want to view next.XThe chosen image will be displayed in the 
middle, and the next four...