Canon Digital Ixus 230 Hs User Guide

							121
Grouped images taken in   mode (p. 78) can also be viewed individually.
Choose an image group.
zPress the qr buttons to choose an image 
that displays  .
Choose .
zAfter pressing the  m button, press the 
op  buttons to choose  , then press the 
m  button again.
View each image in the group.
zIf you press the qr  buttons, only the 
images in the group will be displayed.
zAfter pressing the  m button, press the 
op  buttons to choose  , then press the 
m  button again to cancel group playback.
Viewing Each Image in a Group
Group playback
In group playback (Step 3), you can use the FUNC. menu functions that appear 
when you press the m  button, as well as search (p. 114) and magnify (p. 120) 
images. You can process all the images in a group at once while in “Protecting 
Images” (p. 124), “Erasing Images” (p. 128), “Choosing Images for Printing 
(DPOF)” (p. 149), or “Choosing Images fo r a Photobook” (p. 154), by choosing a 
set of grouped images.
 
						

							Viewing Each Image in a Group
122
Grouped images taken in   mode can be ungrouped and viewed 
individually.
Choose [Group Images].
zPress the n button to choose [Group 
Images] in the 1  tab.
Choose a setting.
zPress the qr buttons to choose [Off].zPress the n  button to complete the 
setting and restore single image playback.
XGrouped images taken in   mode are 
ungrouped and appear individually.
zTo regroup the images, follow the steps 
above to choose [On].
Ungrouping Images
Grouping cannot be canceled while viewing images individually (p. 121).
 
						

							123
The camera will choose 4 images based on the displayed image.
If you choose one of those images, the camera will select 4 more images
letting you enjoy playing back images in an unexpected order. This will work 
best if you take many shots of various scenes.
Choose .
zAfter pressing the m button, press the 
op  buttons to choose  , then press the 
m  button again.
XFour images will appear as possibilities.
Choose an image.
zPress the opqr  buttons to choose the 
image you want to view next.
XThe chosen image will be displayed in the 
center, and the next 4 possibilities will 
appear.
zPress the m  button to display the center 
image at full size. Press the m  button 
again to restore the original display. 
zPress the n  button to restore single 
image playback.
Displaying Various Images 
(Smart Shuffle)
• Only still images shot with this ca mera will play back in Smart Shuffle.
•  is not available in the following situations:
-If there are less than 50 images taken with this camera on the memory card
- If you play back images not supported by Smart Shuffle
- During filtered playback
 
						

							124
You can choose from 3 transition effects when switching between images in 
single image playback.
Choose [Transition].
zPress the n button to choose 
[Transition] in the  1 tab, then press the 
qr  buttons to choose a transition effect.
You can protect important images so that they cannot be accidentally erased 
with the camera (pp. 30, 128).
Protect the image.
zAfter pressing the  m button, press the 
op  buttons to choose : , then press the 
m  button again.
X[Protected] will appear on the screen.zTo unlock an image, follow the step above 
to choose : again, then press the  m 
button.
Changing Image Transitions
Protecting Images
If you format the memory card (pp. 23 , 159), protected images will also be 
erased.
Protected images cannot be erased with the camera’s erase function. 
To erase an image, cancel pr otection settings first.
 
						

							Protecting Images
125
Choose [Protect].
zPress the n button to choose 
[Protect] in the 1  tab, then press the  m 
button.
Choose a selection method.
zPress the op  buttons to choose a 
selection method, then press the  m 
button.
zPress the n  button to complete the 
setting and restore the menu screen.
Choose [Select].
zFollow Step 2 above to choose [Select], 
then press the  m button.
Choose images.
zPress the qr  buttons to choose an image, 
then press the  m button.
X will appear on the screen.zPress the  m button again to deselect the 
image.   will disappear.
zTo choose additional images, repeat the 
above procedure.
Using the Menu
Choosing Images Individually
 
						

							Protecting Images
126
Protect the image.
zIf you press the n button, a 
confirmation screen will appear.
zPress the qr  buttons to choose [OK], then 
press the  m button.
Choose [Select Range].
zFollow Step 2 on p. 125 to choose [Select 
Range], then press the  m button.
Choose a starting image.
zPress the m  button.
zPress the qr  buttons to choose an image, 
then press the  m button.
If you switch to Shooting mode or turn off the camera before performing the 
operations in Step 3, images will not be protected.
Selecting a Range
 
						

							Protecting Images
127
Choose an ending image.
zPress the r button to choose [Last image], 
then press the  m button.
zPress the qr  buttons to choose an image, 
then press the  m button.
zYou cannot choose images before the first 
image.
Protect images.
zPress the p  button to choose [Protect], 
then press the  m button.
Choose [All Images].
zFollow Step 2 on p. 125 to choose [All 
Images], then press the  m button.
Protect images.
zPress the op  buttons to choose [Protect], 
then press the  m button.
Choosing All Images
You can unlock groups of protected images if you choose [Unlock] in Step 
4 in “Selecting a Range”, or Step 2 in “Choosing All Images”.
 
						

							128
You can choose images and then erase them in groups. Since erased images 
cannot be recovered, exercise adequate caution before erasing. Protected 
images (p. 124) cannot be erased.
Choose [Erase].
zPress the n button to choose [Erase] 
in the 1  tab, then press the m  button.
Choose a selection method.
zPress the op buttons to choose a 
selection method, then press the  m 
button.
zPress the n  button to restore the 
menu screen.
Choose [Select].
zFollow Step 2 above to choose [Select], 
then press the  m button.
Choose an image.
zIf you follow Step 2 on p. 125 to choose 
images,   will appear on the screen.
zPress the  m button again to deselect the 
image.   will disappear.
zTo choose additional images, repeat the 
above procedure.
Erasing Images
Choosing a Selection Method
Choosing Images Individually
 
						

							Erasing Images
129
Erase.
zIf you press the n button, a 
confirmation screen will appear.
zPress the qr  buttons to choose [OK], then 
press the  m button.
Choose [Select Range].
zFollow Step 2 on p. 128 to choose [Select 
Range], then press the  m button.
Choose images.
zFollow Steps 2 and 3 on p. 126 to choose 
images.
Erase.
zPress the p  button to choose [Erase], 
then press the  m button.
Choose [All Images].
zFollow Step 2 on p. 128 to choose 
[All Images], then press the  m button.
Erase.
zPress the qr  buttons to choose [OK], then 
press the  m button.
Selecting a Range
Choosing All Images
 
						

							130
When you tag images as favorites, you can easily categorize just those 
images. You can also filter out just those images for viewing, protecting or 
erasing (p. 115).
Make the setting.
zAfter pressing the m button, press the 
op  buttons to choose  , then press the 
m  button again.
X[Tagged as Favorite] will appear on the 
screen.
zTo unlock an image, follow the step above 
to choose   again, then press the  m 
button.
Choose [Favorites].
zPress the n  button to choose 
[Favorites] in the  1 tab, then press the m 
button.
Choose an image.
zPress the qr  buttons to choose an image, 
then press the  m button.
X will appear on the screen.zPress the m  button again to untag the 
image.  disappears.
zTo choose additional images, repeat the 
above procedure.
Tagging Images as Favorites
Using the Menu