Canon Digital Ixus 230 Hs User Guide

							111
You can trim the beginnings and ends of recorded movies.
Choose *.
zFollow Steps 1 – 3 on p. 33 to choose  *, 
then press the  m button.
XThe movie editing panel and the movie 
editing bar will appear.
Set the editing range.
zPress the op  buttons to choose   or 
.
zIf you press the qr  buttons to move  ,   
will appear at points where the movie can 
be edited. If you choose  , you can trim 
the beginning of the movie from  . If you 
choose  , you can trim the end of the 
movie from  .
zEven if you move   to a point other than a  , only the portion from the nearest   
to the left will be trimmed when   is 
chosen. Only the portion from the nearest   to the right will be trimmed when   is 
chosen.
Check the edited movie.
zPress the op  buttons to choose  , then 
press the m  button. The edited movie will 
play.
zTo edit the movie again, repeat Step 2.zTo cancel editing, press the  op buttons 
to choose  . After pressing the  m 
button, press the  qr buttons to choose 
[OK], then press the  m button again.
Editing
Movie Editing Bar
Movie Editing Panel
 
						

							Editing
112
Save the edited movie.
zPress the op buttons to choose  , then 
press the  m button.
zPress the qr  buttons to choose [New 
File], then press the  m button.
XThe movie will be saved as a new file.
•When [Overwrite] is chosen in Step 4, the unedited movie is overwritten 
with the edited movie, erasing the original.
• When there is not enough space left on the memory card, only [Overwrite] 
can be chosen.
• If the battery is depleted partway through saving, the edited movie clips 
may not be saved.
• When editing movies, you should use  a fully charged battery, or an AC 
adapter kit (sold separately) (p. 203).
 
						

							113
Using Various Playback andEditing Functions
This chapter explains various  ways to play back and edit images.
•Press the 1  button to enter Playback mode before operating the camera.
•It may not be possible to play back or edit images that have been edited 
on a computer, have had their file names changed, or have been taken 
on a different camera.
• The edit function (pp. 136 – 140) cannot be used if the memory card does 
not have enough free space available.
7
 
						

							114
Displaying multiple images at the same time lets you quickly find the image 
you want.
Move the zoom lever toward g.
XImages will display in an index.zThe number of images increases each 
time you move the lever toward  g.
zThe number of images decreases each 
time you move the lever toward k.
Choose an image.
zPress the opqr  buttons to choose an 
image.
XAn orange frame appears on the chosen 
image.
zPress the  m button to display the chosen 
image by itself.
Pressing the  qr buttons for more than 1 second will display images in a line 
letting you quickly search them. You can also jump by the shooting date 
(Scroll Display).
Choose an image.
zIf you set the camera to single image 
playback and press the  qr buttons for 
more than 1 second, the images will 
display as shown on the left. Press the  qr 
buttons to choose an image.
zPress the m  button to restore single 
image playback.
zPress the op  buttons during scroll 
display to search images by the shooting 
date.
Quickly Searching Images
Searching Images Using Index Display
Searching Images by Scrolling
 
						

							Viewing Images in Filtered Playback
115
You can select movies made in   mode (p. 72) by date for viewing.
Choose .
zAfter pressing the m button, press the 
op  buttons to choose  , then press the 
m  button again.
Choose a movie date.
zPress the op  buttons.
Play the movie.
zPress the m button.XThe movie will play.
When there are many images on the memory card, you can filter and display 
them by a specified filter. You can also protect (p. 124) or delete (p. 128) 
images at once while filtered.
Choose  s.
zAfter pressing the  m button, press the 
op  buttons to choose  s, then press the 
m  button again.
Choose a filter.
zPress the op  buttons to choose a filter, 
then press the  m button.
To turn off this effect, press the  n button to choose [Scroll Display] in 
the  1 tab, then choose [Off].
Viewing Movies Made with Movie Digest
Viewing Images in Filtered Playback
 
						

							Viewing Images in Filtered Playback
116
View the filtered images.
zPress the op buttons to choose a filter 
for playback, then press the  m button 
(except for  ).
XFiltered playback starts and a yellow frame 
appears.
zIf you press the qr  buttons, only the 
chosen target images will display.
zIf you choose   in Step 2, filtered 
playback will be canceled.
Search filters
Favorites Displays the images tagged as favorites (p. 130)
Shot Date Displays the images shot on a specified date
My Category Displays the images of a specified category (p. 132)
Still image/Movie Displays still images, movies or movies shot in   mode
What if you cannot choose a filter?
Filters that do not have any  corresponding images cannot be chosen.
Filtered playback
In filtered playback (Step 3), you can view filtered images with “Quickly Searching 
Images” (p. 114), “Viewing Slideshows” (p. 117), and “Magnifying Images” 
(p. 120). You can process all filtered images at once while performing operations 
in “Protecting Images” (p. 124), “Erasing Images” (p. 128), “Choosing Images for 
Printing (DPOF)” (p. 149), or “Choosing Images for a Photobook” (p. 154) by 
choosing all of the filtered images.
However, if you change the category (p. 132), or edit an image and save it as a 
new image (p. 136), a message will appear, and filtered playback will cancel.
;
 
						

							117
You can automatically play back images recorded to a memory card. 
Each image displays for approximately 3 seconds.
Choose ..
zAfter pressing the  m button, press the 
op  buttons to choose . , then press the 
m  button again.
Choose a transition effect.
zPress the op  buttons to choose an 
effect, then press the  m button.
XThe slideshow will start a few seconds 
after [Loading image...] appears on the 
screen.
zIn filtered playback (p. 115), only images 
matching a filter play back.
zYou can pause/restart a slideshow by 
pressing the  m button again.
zPress the n  button to stop the 
slideshow.
Viewing Slideshows
• If you press the  qr buttons during playback, the image will switch. If you 
keep the  qr buttons pressed, you can fast-forward through images.
• The power saving function (p. 50)  does not work during slideshows.
 
						

							Viewing Slideshows
118
You can set a slideshow to repeat, or change transition effects and the time 
that slideshow images are displayed. You can choose from 6 transition 
effects when switching between images.
Choose [Slideshow].
zPress the n button to choose 
[Slideshow] in the  1 tab, then press the 
m  button.
Choose a setting.
zPress the op  buttons to choose an item, 
then press the  qr buttons to adjust the 
setting.
zIf you choose [Start] and press the  m 
button, the slideshow starts with your 
settings.
zPress the n  button to restore the 
menu screen.
Changing Settings
You cannot change [Play Time] if [Bubble] is chosen in [Effect].
 
						

							119
You can magnify the area of a recorded image that was inside the AF Frame 
to check the focus.
Press the p button to switch to the 
focus check display (p. 42).
XA white frame will appear where the AF 
frame was when the focus was set.
XA gray frame will appear on a face 
detected during playback.
XThe area within the orange frame appears 
magnified.
Switch frames.
zMove the zoom lever toward  k once.XThe screen shown on the left will appear.zPress the m  button to move to a different 
frame when multiple frames appear.
Change the magnification level or 
location.
zUse the zoom lever to change the display 
size, and the  opqr buttons to change 
the display position while checking the 
focus.
zPress the n  button to reset the 
display to Step 1.
Checking the Focus
The focus check display is not available for movies.
 
						

							120Move the zoom lever toward 
k.
zThe display will zoom in on the image. If 
you continue to hold the zoom lever, it will 
zoom in up to a maximum factor of 
approximately 10x.
zIf you press the opqr  buttons, you can 
move the location of the displayed area.
zMove the zoom lever toward g to zoom 
out, or continue to hold it to return to single 
image playback.
zWhen   appears on the screen, press 
the  m button to switch to  . Press 
the  qr buttons to switch between images 
while zoomed. Press the  m button again 
to return to the original setting.
Magnifying Images
Approximate Location of 
Displayed Area
• In magnified display, pressing the  n button restores single image 
playback.
• Movies cannot be magnified.