Canon cinema EOS C300 PL User Manual
Have a look at the manual Canon cinema EOS C300 PL User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
151 Photo Operations Deleting All Photos 1 Open the [Delete All Photos] submenu.[w Other Functions] > [Delete All Photos] 2 Select [OK] and then press SET. • All of the photos on the SD card, except for protected ones, will be deleted. • Select [Cancel] instead to cancel the operation. • While the photos are being deleted, you can press SET to cancel. 3 When the confirmation message appears, press SET. IMPORTANT • Be careful when deleting photos. Deleted photos cannot be recovered. Protecting Photos You can protect photos to prevent accidental erasure. Th e custom picture file embedded in such a photo is also protected. Photos can be protected from the photo playback screen or [Photos] index screen. Protecting a Photo from the Playback Screen 1 Display the photo to be protected ( A149). 2 Press SET to open the photo menu. 3 Select [Protect] and then press SET. • To remove protection settings from a protected photo, select [Unprotect] instead. • The screen prompts you to confirm the operation. 4 Select [OK] and then press SET. • Select [Cancel] instead to cancel the operation. • The selected photo is protected and i appears on the lower left of the screen. • If a custom picture file is embedded in the photo, it is also protected. Protecting a Photo from the Index Screen 1 Open the [Photos] Index Screen ( A149). 2 Move the orange selection frame to the photo to be protected. 3 Press SET to open the photo menu. 4 Select [Protect] and then press SET. • To remove protection settings from a protected photo, select [Unprotect] instead. • The screen prompts you to confirm the operation. 5 Select [OK] and then press SET. • The selected photo is protected and i appears next to the photo’s thumbnail. • Select [Cancel] instead to cancel the operation. • If a custom picture file is embedded in the photo, it is also protected. Operating modes: [ w Other Functions] [Delete All Photos]
Photo Operations 152 IMPORTANT • Initializing an SD card will permanently erase all the data it contains, including protected photos and custom picture files. Copying Custom Picture Files You can copy to the camcorder a custom picture file embedded in a photo. Custom pi cture files can be copied from the photo playback scr een or [Photos] index screen. Copying a File from the Playback Screen 1 Display the photo with the custom picture file to be copied ( A149). 2 Press SET to open the photo menu. 3 Select [Copy / File] and then press SET. •The [ / Data 1/3] screen appears with the orange selection frame indicating a file slot in the camcorder. • Alternatively, you can press the CUSTOM PICTURE button. • You can push the joystick up/down or turn the SELECT dial to display the [ / Data 2/3] and [ / Data 3/3] screens. 4 Push the joystick left/right to select the desired file slot and then press SET. 5 Select [OK] and then press SET. • The custom picture file embedded in the selected ph oto is copied, overwriting the file in that slot. • Select [Cancel] instead to cancel the operation. 6 When the confirmation message appears, press SET. Copying a File from the Index Screen 1 Open the [Photos] Index Screen ( A149). 2 Move the orange selection frame to the photo with the custom picture file to be copied. 3 Press SET to open the photo menu. 4 Select [Copy / File] and then press SET. •The [ / Data 1/3] screen appears with the orange selection frame indicating a file slot in the camcorder. • Alternatively, you can press the CUSTOM PICTURE button. • You can push the joystick up/down or turn the SELECT dial to display the [ / Data 2/3] and [ / Data 3/3] screens. 5 Push the joystick left/right to select the desired file slot and then press SET. 6 Select [OK] and then press SET. • The custom picture file embedded in the selected ph oto is copied, overwriting the file in that slot. • Select [Cancel] instead to cancel the operation. 7 When the confirmation message appears, press SET. NOTES • You cannot copy the custom picture file to a file slot with a protected file. • By default, file slots [C7] to [C9] are protected. Operating modes:
153 Photo Operations Photo Numbering Photos are automatically assigned consecutive numbers from 0101 to 9900, and stored on the SD card in folders containing up to 100 photos. Folders are numbered from 101 to 998. You can select the photo numbering method to be used. The photo number indicates the name an d location of the file on the SD card. For example, a photo numbered 101-0107 is located in the “DCIM\ 101CANON” folder as the file “IMG_ 0107.jpg”. 1 Open the [Photo Numbering] submenu. [w Other Functions] > [Photo Numbering] 2 Select the desired option and the press SET. Options NOTES • If you select [Continu.] and the SD card you insert alr eady contains a photo with a larger number, a new photo will be assigned a number one higher than that of the last photo on the SD card. • We recommend using the [Continu.] setting. Operating modes: [Reset]: Photo numbers will restart from 101-0101 every time you insert a new SD card. If an SD card already contains photos, photo numbers will continue from the number following that of the last photo on the SD card. [Continu.]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder. [ w Other Functions] [Photo Numbering] [Continu.]
8 155 Additional Information Menu Options For details about how to select an item, refer to Using the Menus (A 29). For details about each function, see the reference page. Menu items without a reference page are explained after the tables. Setting options in boldface indicate default values. Menu items not available appear grayed out. To skip directly to the page of a specific menu: [ ~ Camera Setup] menu A155 [ ¡ Audio Setup] menu A156 [ ¢ Video Setup] menu A156 [ £ LCD/VF Setup] menu A157 [ ¤ TC/UB Setup] menu A160 [ w Other Functions] menu A160 [ My Menu] customized menu A164 [ ~ Camera Setup] me nu ( mode only) * Available only with compatible EF lenses ( A187). **The default value depends on the country/region or purchase. Menu itemSubmenuSetting optionsA # [Light Metering][Backlight], [Standard], [Spotlight]73 # [AE Shift][+2.0], [+1.5], [+1.25], [+1.0], [+0.75], [+0.5], [+0.25], [±0], [-0.25], [-0.5], [-0.75], [-1.0], [-1.25], [-1.5], [-2.0]72 [ISO/Gain][Select][ISO] , [Gain] 65[Extended Range][On], [Off] [ISO Increment][1 stop], [1/3 stop] [Gain][Normal] , [Fine] # [Iris][Mode]*[Automatic], [Manual] 69[Iris Increment][1/2 stop], [1/3 stop], [Fine] [Zoom-Iris Correct.][On], [Off] [Shutter][Mode][Speed] , [Angle], [Clear Scan], [Slow], [Off]62[Shutter Increment][1/3 stop], [1/4 stop] # [AF Mode]*[One Shot] , [Continu.]77 [Flicker Reduction][Automatic], [Off]64 [/ CINEMA Locked][On], [Off]58 [ABB][Cancel], [OK]48 [Color Bars][Enable][On], [Off]98[Type][SMPTE], [EBU]**, [ARIB] # [Periph. Illum. Corr.][On], [Off]34
Menu Options 156 [¡ Audio Setup] menu * Not available in the [Photos] index screen. [¢ Video Setup] menu * Not available for 24.00P recordings. Menu itemSubmenuSetting optionsA [Audio Input][XLR Rec Channel][CH1], [CH1/CH2]Ü–92 [XLR1 Mic Trimming][+12 dB], [+6 dB], [0 dB] , [-6 dB], [-12 dB]Ü–93[XLR2 Mic Trimming] [XLR1 Mic Att.][On], [Off]Ü–94[XLR2 Mic Att.] [XLR ALC Link] [Linked], [Separated]Ü–93 [Limiter][On], [Off]Ü–93, 94 [1 kHz Tone][-12 dB], [-18 dB], [-20 dB], [Off]Ü–98 [MIC Mode][Automatic], [Manual]Ü–94[MIC Level]0 to 99 (50)Ü– [MIC Att.][On], [Off]Ü–95 [Audio Output]*[Channel][CH1/CH2], [CH1/CH1], [CH2/CH2], [All/All]ÜÜ95 [Headphone Volume][Off], 1 to 15 (8)ÜÜ129 Menu itemSetting optionsA [SDI Output][HD], [SD]*, [Off]141 [SYNC Output][HD-Y], [HD Sync], [Blk Burst]*, [Composite]* , [Off]90, 141 [HD Onscreen Disp.][On], [Off]142[SD Onscreen Disp.]*[On], [Off] [SD Output]*[Squeeze], [Letterbox] , [Side Crop]142
157 Menu Options [£ LCD/VF Setup] menu Menu itemSubmenuSetting optionsA [LCD Setup][Brightness]-99 to 99 (±0)ÜÜ 39 [Contrast]-99 to 99 (±0)ÜÜ [Color]-20 to 20 (±0)ÜÜ [Sharpness]1 to 4 (2)ÜÜ [Backlight][Normal] , [Bright]ÜÜ [VF Setup][Brightness]-99 to 99 (±0)ÜÜ 39 [Contrast]-99 to 99 (±0)ÜÜ [Color]-20 to 20 (±0)ÜÜ [Sharpness]1 to 4 (2)ÜÜ [Backlight][Normal] , [Bright]ÜÜ [LCD/VF B&W][On], [Off]ÜÜ39 [LCD/VF Simul.][On], [Off]ÜÜ39 [View Assist.][On], [Off]Ü–58 [Peaking][On], [Off]Ü– 79 [Select] [Peaking 1], [Peaking 2]Ü– [Peaking 1][Color][White], [Red], [Yellow], [Blue]Ü– [Gain][Off], 1 to 15 (8)Ü– [Frequency]1 to 4 (2)Ü– [Peaking 2][Color][White], [Red], [Yellow], [Blue]Ü– [Gain][Off], 1 to 15 (15)Ü– [Frequency]1 to 4 (1)Ü– [Zebra][On], [Off]Ü– 83 [Select][Zebra 1], [Zebra 2], [Zebra 1&2]Ü– [Zebra 1 Level][70 ±5%] , [75 ±5%], [80 ±5%], [85 ±5%], [90 ±5%], [95 ±5%]Ü– [Zebra 2 Level][70%], [75%], [80%], [85%], [90%], [95%], [100%]Ü– [Zebra HD Output][On], [Off]Ü– [Markers][Enable][On], [Off]Ü– 82 [Center][White], [Gray], [Off]Ü– [Horizontal][White], [Gray], [Off]Ü– [Grid][White], [Gray], [Off]Ü– [Safety Zone][White], [Gray], [Off]Ü– [Safety Zone Area][80%], [90%], [92.5%], [95%]Ü– [Aspect Marker][White], [Gray], [Off]Ü– [Aspect Ratio][4:3], [13:9], [14:9], [1.66:1], [1.75:1], [1.85:1], [2.35:1]Ü– [Audio Level]*[On], [Off]–Ü–
Menu Options 158 * Not available in the [Photos] index screen. [Audio Level]: Displays the audio level meter when set to [On]. [Custom Display 1] settings # [Light Metering]: When set to [On], the light metering icon ( ° or ® ) is displayed if [~ Camera Setup] > [Light Metering] is set to [Backlight] or [Spotlight]. [Custom Picture]: Displays the custom picture icon ( /) when set to [On], indicating that a custom picture profile will be recorded with a clip. [Custom Display 1]# [Light Metering][On], [Off]Ü–– [Custom Picture][On], [Off]Ü– # [Focal Length][On], [Off]Ü– [ND Filter][On], [Off]Ü– # [AF Mode][On], [Off]Ü– [Key Lock][On], [Off]Ü– [White Balance][On], [Off]Ü– # [Exposure][On], [Off]Ü– # [Iris][On], [Off]Ü– [ISO/Gain][On], [Off]Ü– [Shutter][On], [Off]Ü– [Peaking][On], [Off]Ü– [Magnification][On], [Off]Ü– [View Assist.][On], [Off]Ü– # [Lens][On], [Off]Ü– [Custom Display 2][Remaining Battery][Warning], [Normal], [Off]Ü–– [Remaining Rec Time][Warning], [Normal], [Off]Ü– [Rec Mode][On], [Off]Ü– [Genlock][On], [Off]Ü– [Time Code][On], [Off]Ü– [Interval Counter][On], [Off]Ü– [SD Card Status][Warning], [Normal], [Off]Ü– [Temperature/Fan][On], [Off]Ü – [Bit Rate/Resolution] [On] , [Off]Ü– [Frame Rate][On], [Off]Ü– [Character Rec][On], [Off]Ü– [Output Display][On], [Off]Ü– [SDI Rec Command][On], [Off]Ü– [User Memo][On], [Off]Ü– [User Bit][On], [Off]Ü– [Audio Output CH][On], [Off]Ü– [Audio Level][On], [Off]Ü– [Wi-Fi][On], [Off]Ü– [GPS][On], [Off]Ü– [Date/Time][Date/Time], [Time], [Date], [Off]Ü– [Metadata Display]*[Date/Time][On], [Off]–Ü–[Camera Data][On], [Off]–Ü Menu itemSubmenuSetting optionsA
159 Menu Options # [Focal Length]: Displays the current focal length of an attached EF lens when set to [On]. [ND Filter]: Displays the ND filter in dicator when set to [On]. # [AF Mode]: When set to [On], displays the autofocus icon (AF) if the focus mode switch on the attached EF lens is set to AF. [Key Lock]: Displays the key lock icon ( C) when set to [On]. [White Balance]: Displays the white balance indicator when set to [On]. # [Exposure]: Displays the exposure bar when set to [On]. # [Iris]: Displays the aperture setting when set to [On]. [ISO/Gain]: Displays the ISO speed or gain setting when set to [On]. [Shutter]: Displays the shutter speed setting when set to [On]. [Peaking]: Displays the peaking icon ( J or K ) when set to [On]. [Magnification]: Displays the screen magnification icon ( ^) when set to [On], indi cating that the image on the screen is being magnified. [View Assist.]: Displays the view assistance icon ( ) when set to [On]. # [Lens]: Displays the lens warning icon ( i) when set to [On]. [Custom Display 2] settings [Remaining Battery]: Controls when the remainin g battery indicator appears. [Normal]: Always appears on the screen. [Warning]: Appears only when there is a warning. [Remaining Rec Time]: Displays the remaining recording time. [Normal]: Always appears on the screen. [Warning]: Appears only when there is a warning. [Rec Mode]: Displays the recording operation indicator ([STBY] in record pause mode, for example) when set to [On]. [Genlock]: Displays the Genlock synchronization icon ( U) when set to [On]. [Time Code]: Displays the time code when set to [On]. [Interval Counter]: Displays the countdown during interv al recording mode when set to [On]. [SD Card Status]: Controls when the SD car d status indicator appears. [Normal]: Always appears on the screen. [Warning]: Appears only when there is a warning. [Temperature/Fan]: Displays the cooling system warning icons ( and/or ) when set to [On]. [Bit rate/Resolution]: Displays the bit rate and resolution when set to [On]. [Frame Rate]: Displays the frame rate when set to [On]. [Character Rec]: Displays the character recording warning icon ( S) when set to [On], indicating that the onscreen displays will be recorded on the clip. [Output Display]: Displays the output display warning icon ( T) when set to [On], indicating that the onscreen displays will be output to an external monitor. [SDI Rec Command]: Displays the status of the SDI record ing command that is being output when [ w Other Functions] > [SDI Rec Command] is set to [On]. [User Memo]: Displays the user memo icon ( Q) when set to [On], indicating that a user memo will be recorded with a clip. [User Bit]: Displays the user bit when set to [On]. [Audio Output CH]: Displays the audio output channel when set to [On].
Menu Options 160 [Audio Level]: Displays the audio level indicator and, if activated, the audio peak limiter icon ( ) when set to [On]. [Wi-Fi]: Displays the Wi-Fi icon ( ) when set to [On]. [GPS]: Displays the GPS icon ( ) when set to [On]. [Date/Time]: Displays the date and time when set to [On]. [Metadata Display]: Displays the date and time of recording and/or the camera data (shutter speed, aperture value, gain) during playback. [ ¤ TC/UB Setup] menu ( mode only) * In the following cases, the time code is set to [NDF] and this setting cannot be changed: - [w Other Functions] > [24.00P] is set to [On] - [w Other Functions] > [NTSC/PAL] is set to [PAL] - [w Other Functions] > [NTSC/PAL] is set to [NTSC] and the frame rate is set to 23.98P [24P TC/Sync]: Determines the frequency for time code input and output and for Genlock synchronization when the frame rate is set to 23.98P or 24.00P. [XF Legacy]: Synchronization mode compatible with Canon XF series camcorders. Synchronizes the time code at a 30-frame signal and the Genlock signal at a 59.94i or 60.00i signal. [Normal]: Standard synchronization mode. Synchronizes the time code at a 24-frame signal and the Genlock signal at a 23.98P or 24.00P signal. [ ¤ User Bit Setup] menu ( mode only*) * Not available in the [Photos] index screen. [w Other Functions] menu Menu itemSubmenuSetting optionsA [Time Code][Mode][Preset], [Regen.]84 [Run][Rec Run] , [Free Run]84 [DF/NDF]*[DF], [NDF]85 [Setting][Set], [Reset]85 [TC In/Out][In], [Out]89 [24P TC/Sync] [XF Legacy], [Normal] – [User Bit][Rec Mode][Internal] , [External]89 [Output Mode][Fixed], [Pulldown]90 [Type][Setting], [Time], [Date]87 Menu itemSetting optionsA [Output Mode][Fixed], [Pulldown]90 Menu itemSubmenuSetting optionsA [Reset][All Settings][Cancel], [OK]ÜÜ –[Camera Settings][Cancel], [OK]Ü– [Assignable Buttons]1[Cancel], [OK]ÜÜ [Transfer Menu//][Save To * ][Menu], [Menu+ /]ÜÜ124[Load From * ][Menu], [Menu+ /]ÜÜ [Time Zone]List of world time zones. [UTC-05:00 New York] or [UTC+01:00 Central Europe] 2ÜÜ27