Canon cinema EOS C300 PL User Manual
Here you can view all the pages of manual Canon cinema EOS C300 PL User Manual. The Canon manuals for Cinema are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
121
Custom Picture Settings
[Selective NR]
The camcorder detects the characteristics of a certain color or tone and applies a noise reduction filter to the
targeted areas. A zebra pattern will appear over targeted areas on the screen.
[Effect Level]: Adjusts the level of the noise reduction filter. The available options are [Off], [Low], [Middle] and
[High]. (Default: [Off])
[Hue]: Adjusts the hue for the color to be detected. This setting can be adjusted from 0 to 31. (Default: 0)
[Chroma]: Adjusts...](http://img.usermanuals.tech/thumb/14/1566/w300_cinema-eos-c300-pl-1478307121_d-120.png "Page 121
121
Custom Picture Settings
[Selective NR]
The camcorder detects the characteristics of a certain color or tone and applies a noise reduction filter to the
targeted areas. A zebra pattern will appear over targeted areas on the screen.
[Effect Level]: Adjusts the level of the noise reduction filter. The available options are [Off], [Low], [Middle] and
[High]. (Default: [Off])
[Hue]: Adjusts the hue for the color to be detected. This setting can be adjusted from 0 to 31. (Default: 0)
[Chroma]: Adjusts...")
121 Custom Picture Settings [Selective NR] The camcorder detects the characteristics of a certain color or tone and applies a noise reduction filter to the targeted areas. A zebra pattern will appear over targeted areas on the screen. [Effect Level]: Adjusts the level of the noise reduction filter. The available options are [Off], [Low], [Middle] and [High]. (Default: [Off]) [Hue]: Adjusts the hue for the color to be detected. This setting can be adjusted from 0 to 31. (Default: 0) [Chroma]: Adjusts...
Page 122
![Page 122
Custom Picture Settings
122
[Area A Revision]: Sets the amount of correction for area A.[Level]: Adjusts the amount of correct ion to the color saturation. This setting can be adjusted from -50 to 50.
(Default: ±0)
[Phase]: Adjusts the amount of correction to the color phase. This setting can be adjusted from -18 to 18.
(Default: ±0)
[Area B Setting]: Determines the area in which colors will be corrected. [Phase]: Adjusts the color phase for area B. This se tting can be adjusted from 0 to 31....](http://img.usermanuals.tech/thumb/14/1566/w300_cinema-eos-c300-pl-1478307121_d-121.png "Page 122
Custom Picture Settings
122
[Area A Revision]: Sets the amount of correction for area A.[Level]: Adjusts the amount of correct ion to the color saturation. This setting can be adjusted from -50 to 50.
(Default: ±0)
[Phase]: Adjusts the amount of correction to the color phase. This setting can be adjusted from -18 to 18.
(Default: ±0)
[Area B Setting]: Determines the area in which colors will be corrected. [Phase]: Adjusts the color phase for area B. This se tting can be adjusted from 0 to 31....")
Custom Picture Settings 122 [Area A Revision]: Sets the amount of correction for area A.[Level]: Adjusts the amount of correct ion to the color saturation. This setting can be adjusted from -50 to 50. (Default: ±0) [Phase]: Adjusts the amount of correction to the color phase. This setting can be adjusted from -18 to 18. (Default: ±0) [Area B Setting]: Determines the area in which colors will be corrected. [Phase]: Adjusts the color phase for area B. This se tting can be adjusted from 0 to 31....
Page 123
![Page 123
123
Customizing Functions and Onscreen Displays
Customizing Functions and Onscreen Displays
Customize the camcorder to match your shooting style and needs. Use the [wOther Functions] >
[Custom Function] setting to adjust how some of the camcorder’s controls and functions operate in
mode. Similarly, use the [ £LCD/VF Setup] > [Custom Display 1] or [Custom Display 2] setting to customize
the onscreen displays that appear during recording. You can save these preferences along with other menu...](http://img.usermanuals.tech/thumb/14/1566/w300_cinema-eos-c300-pl-1478307121_d-122.png "Page 123
123
Customizing Functions and Onscreen Displays
Customizing Functions and Onscreen Displays
Customize the camcorder to match your shooting style and needs. Use the [wOther Functions] >
[Custom Function] setting to adjust how some of the camcorder’s controls and functions operate in
mode. Similarly, use the [ £LCD/VF Setup] > [Custom Display 1] or [Custom Display 2] setting to customize
the onscreen displays that appear during recording. You can save these preferences along with other menu...")
123 Customizing Functions and Onscreen Displays Customizing Functions and Onscreen Displays Customize the camcorder to match your shooting style and needs. Use the [wOther Functions] > [Custom Function] setting to adjust how some of the camcorder’s controls and functions operate in mode. Similarly, use the [ £LCD/VF Setup] > [Custom Display 1] or [Custom Display 2] setting to customize the onscreen displays that appear during recording. You can save these preferences along with other menu...
Page 124
![Page 124
Saving and Loading Camera Settings
124
Saving and Loading Camera Settings
After you adjust custom picture settings and settings in the various menus, you can save those settings on an
SD card. You can load those settings at a later date or on another C300 or C300 PLcamcorder so that you can
use that camcorder in that same exact way.
Saving Camera Settings to an SD Card
1 Open the [Save To *] submenu.
[w Other Functions] > [Transfer Menu//] > [Save To *]
2 Select [Menu] or [Menu+ /] and then press...](http://img.usermanuals.tech/thumb/14/1566/w300_cinema-eos-c300-pl-1478307121_d-123.png "Page 124
Saving and Loading Camera Settings
124
Saving and Loading Camera Settings
After you adjust custom picture settings and settings in the various menus, you can save those settings on an
SD card. You can load those settings at a later date or on another C300 or C300 PLcamcorder so that you can
use that camcorder in that same exact way.
Saving Camera Settings to an SD Card
1 Open the [Save To *] submenu.
[w Other Functions] > [Transfer Menu//] > [Save To *]
2 Select [Menu] or [Menu+ /] and then press...")
Saving and Loading Camera Settings 124 Saving and Loading Camera Settings After you adjust custom picture settings and settings in the various menus, you can save those settings on an SD card. You can load those settings at a later date or on another C300 or C300 PLcamcorder so that you can use that camcorder in that same exact way. Saving Camera Settings to an SD Card 1 Open the [Save To *] submenu. [w Other Functions] > [Transfer Menu//] > [Save To *] 2 Select [Menu] or [Menu+ /] and then press...
Page 125
5 125 Playback Playback This section explains how to play back clips recorded on a CF card. For details on playing back clips using an external monitor, refer to Connecting to an External Monitor ( A 140). For details on viewing photos on the SD card, refer to Viewing Photos ( A 149). Clip Index Screen Playback functions are accessed from the clip index screen. To open the clip index screen, set the camcorder to mode. If the CF card contains a type of recordings (NTSC/PAL/24.00P) different from...
Page 126
Playback 126 * For clips recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will both be displayed. v Switching Between the CF Card Slots If both CF card slots contain a CF card, you can switch between them as necessary. Press the SLOT SELECT button. • The access indicator of the selected CF card slot will illuminate in green. Switching to Other Index Screens All of the clips on a CF card can be accessed from the clip index screen. However, you can switch to other...
Page 127
![Page 127
127
Playback
Playing Back Clips
You can play back clips from the clip index screen, [$Mark] index screen
and [% Mark] index screen. Use the playback control buttons on the
monitor unit. When the monitor unit is not attached, you have limited
playback control options (play/pause/ stop only) with the buttons on the
camcorder and full playback control options using the joystick and
joystick guide.
1 Move the orange selection frame to the clip you want to play back.
2 Press the
Ò button to start...](http://img.usermanuals.tech/thumb/14/1566/w300_cinema-eos-c300-pl-1478307121_d-126.png "Page 127
127
Playback
Playing Back Clips
You can play back clips from the clip index screen, [$Mark] index screen
and [% Mark] index screen. Use the playback control buttons on the
monitor unit. When the monitor unit is not attached, you have limited
playback control options (play/pause/ stop only) with the buttons on the
camcorder and full playback control options using the joystick and
joystick guide.
1 Move the orange selection frame to the clip you want to play back.
2 Press the
Ò button to start...")
127 Playback Playing Back Clips You can play back clips from the clip index screen, [$Mark] index screen and [% Mark] index screen. Use the playback control buttons on the monitor unit. When the monitor unit is not attached, you have limited playback control options (play/pause/ stop only) with the buttons on the camcorder and full playback control options using the joystick and joystick guide. 1 Move the orange selection frame to the clip you want to play back. 2 Press the Ò button to start...
Page 128
![Page 128
Playback
128
Onscreen Displays
1Appears when [£LCD/VF Setup] > [Metadata Display] > [Camera Data] is set to [On].2Appears when [ £LCD/VF Setup] > [Metadata Display] > [Date/Time] is set to [On].3For clips recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will both be displayed.
78910
14
11
12
17
18
19
1
2
4
5
6 13
15
316
1 Remaining battery time (
A56)
2 Joystick guide ( A129)
3 Shutter speed
1 ( A 62)
4 # Aperture value1 (A 69)
5 ISO Speed/Gain1 ( A 65)
6...](http://img.usermanuals.tech/thumb/14/1566/w300_cinema-eos-c300-pl-1478307121_d-127.png "Page 128
Playback
128
Onscreen Displays
1Appears when [£LCD/VF Setup] > [Metadata Display] > [Camera Data] is set to [On].2Appears when [ £LCD/VF Setup] > [Metadata Display] > [Date/Time] is set to [On].3For clips recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will both be displayed.
78910
14
11
12
17
18
19
1
2
4
5
6 13
15
316
1 Remaining battery time (
A56)
2 Joystick guide ( A129)
3 Shutter speed
1 ( A 62)
4 # Aperture value1 (A 69)
5 ISO Speed/Gain1 ( A 65)
6...")
Playback 128 Onscreen Displays 1Appears when [£LCD/VF Setup] > [Metadata Display] > [Camera Data] is set to [On].2Appears when [ £LCD/VF Setup] > [Metadata Display] > [Date/Time] is set to [On].3For clips recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will both be displayed. 78910 14 11 12 17 18 19 1 2 4 5 6 13 15 316 1 Remaining battery time ( A56) 2 Joystick guide ( A129) 3 Shutter speed 1 ( A 62) 4 # Aperture value1 (A 69) 5 ISO Speed/Gain1 ( A 65) 6...
Page 129
129 Playback Playback Controls When you play back a clip, operate the buttons on camcorder’s body or on the monitor unit or use the joystick an d joystick guide to use fast playback, play back frame-by-frame or skip clips. Refer to the following table. Available Playback Types NOTES • There is no audio during any of the pl ayback types listed in the previous table. • During some special playback modes, you may notice so me anomalies (blocky video artifacts, banding, etc.) in the playback picture. •...
Page 130
![Page 130
Clip Operations
130
Clip Operations
Besides playing back a clip, you can perform other operations such as deleting a clip or displaying clip
information. This is done through the clip menu, whic h contains different functions depending on the index
screen. You can use the functions in the [ wOther Functions] menu to perform some of the operations on all the
clips. Refer to the following table for available functions and refer to the following pages for more details of the
functions.
Clip Menu...](http://img.usermanuals.tech/thumb/14/1566/w300_cinema-eos-c300-pl-1478307121_d-129.png "Page 130
Clip Operations
130
Clip Operations
Besides playing back a clip, you can perform other operations such as deleting a clip or displaying clip
information. This is done through the clip menu, whic h contains different functions depending on the index
screen. You can use the functions in the [ wOther Functions] menu to perform some of the operations on all the
clips. Refer to the following table for available functions and refer to the following pages for more details of the
functions.
Clip Menu...")
Clip Operations 130 Clip Operations Besides playing back a clip, you can perform other operations such as deleting a clip or displaying clip information. This is done through the clip menu, whic h contains different functions depending on the index screen. You can use the functions in the [ wOther Functions] menu to perform some of the operations on all the clips. Refer to the following table for available functions and refer to the following pages for more details of the functions. Clip Menu...