Home > Canon > Cinema > Canon cinema EOS C300 Mark II PL User Manual

Canon cinema EOS C300 Mark II PL User Manual

Here you can view all the pages of manual Canon cinema EOS C300 Mark II PL User Manual. The Canon manuals for Cinema are available online for free. You can easily download all the documents as PDF.

Page 1

Wireless File Transmitter
WFT-E6
Guide for EOS C300 Mark II Users
E
DIE-0478-000 

Page 2

2
You can attach a WFT-E6 Wireless File Transmitter to the Canon Digital Cinema Camera EOS 
C300 Mark II to connect the camera to a Wi-Fi network and use the camera’s network 
functions. This guide will explain how to attach the WFT-E6 to the camera and configure the 
transmitter.
For specifications and additional information about the WFT-E6, refer to the Wireless File 
Transmitter WFT-E6 Instruction Manual. For details about how to use Browser Remote to 
operate the camera, refer to the camera’s...

Page 3

3
Introduction2
About this Guide ................................................................................................................................  2
Attaching to the Camera ....................................................................................................................  4
1Network Settings  5
Available Network Functions..............................................................................................................  6
Connecting to a Wi-Fi Network...

Page 4

4
Turn off the camera before attaching the WFT-E6 Wireless File Transmitter. The transmitter is 
powered by the camera. Make sure the camera’s battery pack is sufficiently charged before 
using the transmitter.
1
Turn off the camera.
2
Attach the transmitter.
 Open the camera’s system extension terminal 
cover (), align the transmitter’s plug with the 
system extension terminal as shown in the 
illustration and firmly push the transmitter in ().
 Turn the tightening screw in the direction of the 
arrow...

Page 5

5
1
Network Settings
Complete the network settings using the camera’s menu screens. 

Page 6

6
After you connect the camera to a network via Wi-Fi (A7), you can use the following network 
functions.
Wi-Fi functions and connection types
1Connection to a Wi-Fi network via an external access point (wireless router, etc.)2Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point.
Available Network Functions
FunctionDescription
Wi-Fi connection
Infrastructure1Camera 
Access Point2
Browser RemoteControl the camera remotely from the Web 
browser of a connected...

Page 7

7
Before using the network functions, you need to complete the network settings on a camera 
with the transmitter attached. Once you attach the transmitter to the camera, you can check the 
current network settings on the status screens (A21) and change them if necessary.
The camera can be connected to a Wi-Fi enabled device either through an access point 
(Infrastructure connection) or directly (Camera Access Point connection). The connection used 
will depend on the network function you want to use....

Page 8

8
Connecting to a Wi-Fi Network
[Manual]
If the access point you want to use has stealth mode activated and it cannot be automatically 
detected by the camera, you can enter all the necessary settings manually. This requires more 
advanced knowledge of Wi-Fi and network settings.
Depending on the country/region of use, some restrictions on outdoor use or camera access point
connections may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For
details see Areas of Use and...

Page 9

9
When the camera is set to   mode, connect a Wi-Fi enabled device using a Camera 
Access Point connection. Initially, basic default network settings (SSID, password, etc.) are 
saved in the camera and you can use these settings to immediately connect a device to the 
camera.
If you prefer to use different settings, follow the procedure below.
1
Set the camera to   mode and open 
the [Connection Settings] submenu.
[wSystem Setup] > [Network Settings] > 
[Connection Settings]
 The current Camera Access...

Page 10

10
Camera Access Point Connection
6
To change the [Encryption Key] 
(password), select [Input] and then 
press SET.
 Enter the encryption key (password) the camera 
will use as a Wi-Fi access point using the 
keyboard screen.
 The encryption key (password) is needed to 
connect the Wi-Fi enabled device to the camera. If 
necessary, write it down.
 After confirming the encryption key (password), 
continue with the procedure to configure the IP 
address assignment (A16).
Using the Virtual Keyboard Screen...
Start reading Canon cinema EOS C300 Mark II PL User Manual

Related Manuals for Canon cinema EOS C300 Mark II PL User Manual

All Canon manuals