Home > Canon > Cinema > Canon cinema EOS C100 Mark II User Manual

Canon cinema EOS C100 Mark II User Manual

Here you can view all the pages of manual Canon cinema EOS C100 Mark II User Manual. The Canon manuals for Cinema are available online for free. You can easily download all the documents as PDF.

Page 41

41
Using an SD Card
Inserting and Removing an SD Card
The camcorder is equipped with two SD card slots.
1 Turn off the camcorder.
2 Open the OLED panel and then open the SD card 
compartment cover.
3 Insert the SD card straight, with the label facing up, all the way 
into the SD card slot until it clicks.
4 Close the SD card compartment cover.
• Do not force the cover closed if the SD card is not correctly 
inserted.
Checking the Status of the SD Card Slots
You can check the status of the SD card slots...

Page 42

Using an SD Card
42
Initializing an SD Card
The first time you use an SD card with this camcorder, initialize it first. You can also initialize an SD card to 
permanently delete all the data it contains.
When initializing an SD card, you can select quick initialization, which clears the file allocation table but does not 
physically erase the stored data, or complete initialization, which deletes all data completely.
1 Open the [Initialize Media] submenu.
[wOther Functions] > [Initialize Media]
2 Select...

Page 43

43
Using an SD Card
Relay Recording and Double Slot Recording
The camcorder features two useful SD card recording methods, relay recording and double slot recording.
Relay recording: This allows you to continue recording on another SD card if the SD card you are using becomes 
full. Relay recording is available from SD card slot A to SD card slot B, and vice versa.
Double slot recording: This records the same clip simultaneously to both SD cards, which is a convenient way to 
make a backup copy of your...

Page 44

Using an SD Card
44
Recovering Data on an SD Card
Some actions, such as suddenly turning off the camcorder or removing the SD card while data is being 
recorded, can cause data errors on the SD card. In such case, you may be able to recover the data on the SD 
card. You will be prompted to recover data when you insert an SD card with a data error into the camcorder or 
when trying to play back an MP4 clip that has a data error.
1 When the screen prompts you to recover the data, select [OK] and then press...

Page 45

45
Adjusting the Black Balance
Adjusting the Black Balance
You can have the camcorder adjust the black balance automatically when ambient temperature changes 
considerably or if there is a noticeable change in a true black video signal.
1 Open the [ABB] screen.
[~ Camera Setup] > [ABB]
2 Attach the body cap to the lens mount.
• If a lens was attached, remove the lens and replace the body cap.
3 Select [OK] and then press the joystick.
• The automatic black balance procedure will start.
4 When the...

Page 46

Adjusting the Black Balance
46 

Page 47

3
47
Recording
Recording Video
This section explains the recording basics. Before you begin recording, make a test recording first to check if the 
camcorder operates correctly. Record an AVCHD clip at 28 Mbps for approximately 25 minutes and an MP4 clip 
at 35 Mbps for approximately 20 minutes (A54). Should the camcorder fail to operate correctly, refer to 
Tr o u b l e s h o o t i n g (A185).
For details on recording audio, refer to Recording Audio (A85).
Preparing to Record
1 Attach a charged battery...

Page 48

Recording Video
48
2 Press the START/STOP button to begin recording.
• Recording starts. The rear and front tally lamps illuminate and 
the recording indicator [ÜREC] appears at the top of the 
screen.
• You can use the START/STOP button on the grip unit, the 
camcorder's body (on the front, next to the lens mount) or the 
handle unit.
3 Press the START/STOP button to pause the recording.
• The clip* is recorded to the SD card and the camcorder enters 
record pause mode. Both tally lamps will go...

Page 49

49
Recording Video
Remote Operation Using Browser Remote 
After completing the necessary preparations (A153), you can start and stop recording from a connected 
device using the Browser Remote application.
1 Press [LIVE VIEW ON/OFF] to show the camcorder’s live view image on the Browser Remote screen.
2 Press [START/STOP] to begin recording.
• The recording operation indicator changes to [ÜREC] and the center of the START/STOP button lights up 
in red.
• The time code displayed on the Browser Remote...

Page 50

Recording Video
50
Onscreen Displays
Refer to this section for an explanation of the various screen displays that appear in   mode. You can use 
the custom display function (
A122) to turn off individual onscreen displays if they are not required. In the 
following table, the "Custom Display" column indicates whether the icon can be turned off through [£ OLED/
VF Setup] > [Custom Display 1] or [Custom Display 2] (indicated by "1:" or "2:", respectively) and the name of 
the custom...
Start reading Canon cinema EOS C100 Mark II User Manual

Related Manuals for Canon cinema EOS C100 Mark II User Manual

All Canon manuals