Canon Canoscan Lide220 Quick Start Guide

							Safety PrecautionsChoosing a location•
Do not install the machine in a location that is unstable or subject to excessive vibration.
•
Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
To avoid the risk of fire or electric shocks, use the machine under the operating environment specified
in the On-screen Manual.
•
Do not push the scanner into a narrow cabinet or put a tablecloth on it or place on a thick rug. If the scanner generates heat by doing so, it may cause damage.
•
Do not set up in areas where there are excessive fluctuations in temperature. Also do not move the
scanner from low-temperature areas to high temperature areas. Condensation may cause image errors. Leave the scanner enough time to gradually adapt to the new conditions before use.
•
Do not place the scanner in areas with high humidity, areas subject to direct sunlight, areas with hightemperatures and areas near flame sources. Fire or electrical shock may result.
•
Leave enough space (approximately 8 in. (20 cm)) around the scanner when setting up.
Power supply
•
When unplugging the USB cable, always pull on the main body. Pulling the cable may damage the wires and lead to fire or electrical shock.
•
Do not apply excessive force to plug or unplug USB cable.
•
Do not damage or modify the USB cable.
•
Do not place heavy objects on, pull or excessively bend, twist or tie the USB cable.
•
Do not twist or tie the USB cable.
•
Plug the USB cable completely into the connector.
Working around the machine
•
When setting up the stand, read carefully the paper manual for setting up the stand and place the scanner on the stand correctly.
•
Keep the document cover closed except when necessary.
•
Never put your hands or fingers in the scanner while it is scanning.
•
Hold the scanner firmly with both hands at two ends when carrying it.
•
Do not place any objects on the scanner, especially paper clips, staples and other metallic part orcontainers filled with alcohol, thinners or other flammable liquid.
•
Always release the scanner lock before connecting the scanner to a computer.Running the scanner while it is locked will damage the scanner.
•
When loading a thick book on the platen glass, do not press hard on the document cover.The platen glass may break.
•
Do not release the document cover until it completely opens/closes.
•
Do not place items that weigh 2.0 kg (4.4 lbs.) or more on the platen glass. Also, do not press heavily(i.e., more than 2.0 kg (4.4 lbs.)) on the document cover or the platen glass.
•
Do not drop heavy books or objects on the scanner. Also do not give a shock to the platen glass. Theplaten glass may break.
•
When not in use for extended periods, unplug the USB cable for safety.
21
 
						

							Regulatory and Safety InformationFor models containing lithium battery•
Dispose of used batteries according to the local regulations.
•
Risk of explosion if battery is replaced by an incorrect type.
Users in the U.S.A. FCC Notice (U.S.A. Only)
For 120V, 60Hz model
Model Number: K10403
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Park
Melville, New York 11747
1-800-652-2666
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste, according to
the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a
designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product
or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper
handling of this type of waste could have a possible negative impact on the environment and human
22
 
						

							health due to potentially hazardous substances that are generally associated with EEE. At the same time,your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your household waste disposal
service. For more information regarding return and recycling of WEEE products, please visit www.canon-
europe.com/weee.
Korisnici u Srbiji
Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa ostalim kućnim otpadom, u skladu sa
WEEE Direktivom (2012/19/EU) i nacionalnim zakonima. Ovaj proizvod treba predati određenom centru
za prikupljanje, npr. na osnovi "jedan-za-jedan" kada kupujete sličan novi proizvod, ili ovlašćenom centru
za prikupljanje za reciklažu istrošene električne i elektronske opreme (EEE). Nepravilno rukovanje ovom
vrstom otpada može da ima moguće negativne posledice po životnu sredinu i ljudsko zdravlje usled
potencijalno opasnih materijala koji se uglavnom vezuju za EEE. U isto vreme, vaša saradnja na ispravnom odlaganju ovog proizvoda će doprineti efikasnom korišćenju prirodnih resursa. Za više
informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da
kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću. Za više
informacija o vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-europe.com/weee.
India only.
This product is not to be disposed of with your household waste, according to the e-waste (Management and Handling) Rules, 2011.
This product should be handed over to a designated collection point, e.g., to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste
could have a possible negative impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE. At the same time, your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources. For more information
regarding return and recycling of WEEE products, please visit http://www.canon.co.in/environment/.
Also, this product complies with the "India E-waste Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations
exceeding 0.1 % by weight and 0.01 % by weight for Cadmium, except for the exemptions set in Schedule
II of the Rule.
Environmental InformationReducing your environmental impact while saving money
Power Consumption and Activation TimeThe amount of electricity a device consumes depends on the way the device is used. This product isdesigned and set in a way to allow you to reduce your electricity costs. After the last print it switches to
23
 
						

							Ready Mode. In this mode it can print again immediately if required. If the product is not used for a time,the device switches to its Power Save Mode. The devices consume less power (Watt) in these modes.
If you wish to set a longer Activation Time or would like to completely deactivate the Power Save Mode,
please consider that this device may then only switch to a lower energy level after a longer period of
time or not at all.
Canon does not recommend extending the Activation Times from the optimum ones set as default.
Energy Star ®
The Energy Star ®
 programme is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to minimise environmental impact.
Products which meet the stringent requirements of the Energy Star ®
 programme for both environmental
benefits and the amount of energy consumption will carry the Energy Star ®
 logo accordingly.
Paper types
This product can be used to print on both recycled and virgin paper (certified to an environmental stewardship scheme), which complies with EN12281 or a similar quality standard. In addition it can
support printing on media down to a weight of 64g/m 2
, lighter paper means less resources used and a
lower environmental footprint for your printing needs.
Regulatory Model Code (RMC) is for identification and proof that the product complies with the
regulations. Please note that RMC is different from the marketing model number of the product.
24
 
						

							Main Components
(1) document coverPresses down the placed item.
(2) scanning unit The main part of the scanner that emits light and scans items.
(3) platen Place the item to be scanned.
(4) alignment mark Align a corner of the item with this mark.
(5) scanner buttons You can scan easily according to your purpose by simply pressing a button.
25
 
						

							PDF buttonsSCAN START button
FINISH button
AUTO SCAN button
COPY button
SEND button
(6) scanner lock switch Lock or unlock the scanning unit.
(7) stand locking slot Insert the hook of the stand when setting the scanner upright.
(8) USB connectorConnect the supplied USB cable.
Important
•
There is no power switch or power lamp on this scanner. No AC adapter or power cord is required.
When you connect a computer and the scanner with the USB cable and turn on the computer, the
scanner also turns on.
26
 
						

							Placing Items
Place the Item on the Platen
Items You Can Place & How to Place Items
27
 
						

							Place the Item on the PlatenPlace the item you want to scan on the platen.
Note
•
To scan by using the stand, refer to "Using the Stand ".
1.
Place the item on the platen.
1.
Open the document cover.
2.
Place the item on the platen with the side to scan facing down.
Items You Can Place & How to Place Items
Important
•
Be sure to observe the following when placing the item on the platen. The scanner may not work
correctly or the glass may break.
•
Do not place any objects weighing 4.4 lb (2 kg) or more on the platen
•
Do not put any pressure of 4.4 lb (2 kg) or more on the platen
2.
Close the document cover gently.
Important
•
After placing the item on the platen, be sure to close the document cover properly before starting
to scan.
28
 
						

							Using the Stand1.
Place the item on the platen.
1.
Open the document cover.
2.
Place the item with the side to scan facing the platen and align it with the alignment mark.
Items You Can Place & How to Place Items
Important
•
If you open the document cover wide, the scanner may fall over.
•
Portions placed over (A) (0.094 inch (2.4 mm) from the left edge of the platen) or  (B) (0.106 inch (2.7
mm) from the front edge) cannot be scanned.
2.
Close the document cover gently.
While scanning, hold the document cover lightly with your hand to keep it closed.
29
 
						

							Important
•
When scanning with the scanner positioned upright, do not subject it to vibration during operation.The correct image results may not be obtained (for example, images blur).
•
When using the scanner in the upright position, the item type may not be detected automatically.
Specify the item type and scan.
Scanning Documents
Scanning Photos
Scanning with Favorite Settings
30