Canon Canoscan Lide220 Quick Start Guide

							Scanning in Advanced ModeUse the  Advanced Mode  tab to specify the color mode, output resolution, image brightness, color tone, etc.
when scanning.
Refer to "
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple
documents at one time.
Important
•
The following types of documents may not be scanned correctly. In that case, click  (Thumbnail)
on the Toolbar to switch to whole image view and scan.
•
Photos that have a whitish background
•
Documents printed on white paper, hand-written text, business cards, etc.
•
Thin documents
•
Thick documents
•
The following types of documents may not be scanned correctly.
•
Documents smaller than 1.2 inches (3 cm) square
•
Photos that have been cut to various shapes
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Click the  Advanced Mode  tab.
The tab switches to  Advanced Mode.
Note
•
Settings are not retained when you switch modes.
3.
Set Input Settings according to the document or purpose.
131
 
						

							4.Click Preview .
Preview images appear in the Preview area.5.
Set Output Settings .
6.
Adjust the cropping frame (scan area), correct image, and adjust colors as required.
Adjusting Cropping Frames (ScanGear)
Image Settings
Color Adjustment Buttons
7.
Click Scan.
Scanning starts.
Note
•
Click  (Information) to open a dialog box in which you can check the current scan settings
(document type, etc.).
•
A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
on the 
Scan tab  of the  Preferences  dialog box.
Related Topic
Advanced Mode Tab
132
 
						

							Scanning Multiple Documents at One Time with ScanGear
(Scanner Driver)
You can scan two or more photos (small documents) on the Platen at one time on the  Basic Mode tab and
Advanced Mode  tab.
This section explains how to scan multiple documents from the  Basic Mode tab.
Important
•
To scan multiple documents as a single image, scan in whole image view.
•
The following types of documents may not be cropped correctly. In that case, adjust the cropping
frames (scan areas) in whole image view and scan.
•
Photos that have a whitish background
•
Documents printed on white paper, hand-written text, business cards, etc.
•
Thin documents
•
Thick documents
Scanning Multiple Documents in Whole Image View
•
The following types of documents may not be scanned correctly.
•
Documents smaller than 1.2 inches (3 cm) square
•
Photos that have been cut to various shapes
Note
•
You can also scan multiple documents at one time from the  Advanced Mode tab. Use the Advanced
Mode  tab to make advanced scan settings such as the color mode, output resolution, image brightness,
and color tone.
•
Refer to the corresponding sections below for details on the  Basic Mode tab and Advanced Mode  tab.
Basic Mode Tab
Advanced Mode Tab
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source  according to the document placed on the Platen.
133
 
						

							3.
Click Preview .
Thumbnails of the preview images appear in the Preview area. Cropping frames are specified automatically according to the document size.
4.
Set  Destination .
5.
Set Output Size  according to purpose.
6.
Adjust the cropping frames and set  Image corrections as required.
Note
•
You can correct each image separately. Select the frame you want to correct.
•
In thumbnail view, you can only create one cropping frame per image. To create multiple cropping
frames in an image, scan in whole image view.
Scanning Multiple Documents in Whole Image View
134
 
						

							7.Select the images you want to scan.
Select the checkboxes of the images you want to scan.8.
Click  Scan.
Scanning Multiple Documents in Whole Image View
Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image.
Note
•
Positions of slanted documents are not corrected in whole image view.
1.
After previewing images, click  (Thumbnail) on the Toolbar.
Switch to whole image view.
Note
•
When the whole image is displayed, the icon changes to  (Whole Image).
2.
Set  Destination .
3.
Set Output Size  according to purpose.
Invert aspect ratio  will be enabled when  Output Size is set to anything but  Flexible. Click this button
to rotate the cropping frame. Click again to return it to the original orientation.
4.
Adjust the cropping frames.
135
 
						

							Adjust the size and position of the cropping frames on the preview image. You can also create two or
more cropping frames.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the specified area will be scanned.
Adjusting Cropping Frames (ScanGear)
5.
Set  Image corrections  as required.
6.
Click Scan.
Areas framed by broken lines are scanned.
Note
•
A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
on the 
Scan tab  of the  Preferences  dialog box.
136
 
						

							Correcting Images and Adjusting Colors with ScanGear (Scanner
Driver)
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading
Correction, etc.)
Adjusting Colors Using a Color Pattern
Adjusting Saturation and Color Balance
Adjusting Brightness and Contrast
Adjusting Histogram
Adjusting Tone Curve
Setting Threshold
137
 
						

							Correcting Images (Unsharp Mask, Reduce Dust and Scratches,Fading Correction, etc.)
The  Image Settings  functions on the  Advanced Mode  tab of ScanGear (scanner driver) allow you to
enhance the outline of the subjects, reduce dust/scratches, and correct faded colors when scanning images.
Setting Items
Click 
 (Arrow) of a function and select an item from the pull-down menu.
Important
•
Do not apply these functions to images without moire, dust/scratches, or faded colors. The color tone
may be adversely affected.
•
Refer to "Image Settings " for details and precautions on each function.
Note
•
Refer to "Scanning in Advanced Mode " to start the Advanced Mode  tab of ScanGear and scan.
Adjusting the image brightness and color tone Set  Image Adjustment  to Auto , Photo , Magazine , or Document  according to the document type.
NoneAuto
138
 
						

							Reducing show-through in text documents or lightening the base color inrecycled paper, newspapers, etc. when scanning documents
Set  Reduce Show-through  to ON .
OFFON
Sharpening slightly out-of-focus images
Set  Unsharp Mask  to ON .
OFFON
Reducing gradations and stripe patterns
Set  Descreen  to ON .
OFFON
139
 
						

							Note•
Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenonwhere uneven gradation or a stripe pattern appears when such photos or pictures printed with fine
dots are scanned.  Descreen is the function for reducing this moire effect.
Reducing dust and scratches Set  Reduce Dust and Scratches  to Low , Medium , or High  according to the degree of dust and
scratches.
NoneMedium
Correcting photos that have faded with time or due to colorcast
Set  Fading Correction  to Low , Medium , or High  according to the degree of fading or colorcast.
NoneMedium
Reducing graininess
Set  Grain Correction  to Low , Medium , or High  according to the degree of graininess.
NoneMedium
Correcting shadows that appear between pages when scanning open booklets
Set  Gutter Shadow Correction  to Low , Medium , or High  according to the degree of shadows.
NoneMedium
140