Canon Camera Eos 1d X User Manual

251
You can search for images quickly with the index display showing four or nine images on one screen.
1Press the  button.
  During image playback, press the 
 button.
X [6 u] will be displayed on the lower 
right of the screen.
2Switch to the index display.
 Turn the  dial counterclockwise.XThe 4-image index display will appear. The currently-selected image will be 
highlighted in a blue frame.
 
If you turn the  dial further 
counterclockwise, the 9-image index 
display will appear. Turning the <
6>...

252
x Searching for Images Quickly
With the single-image disp lay, you can turn the  dial to jump through the images forward or backward a ccording to the jump method set.
1Select [Image jump w/6].
 Under the [ 32] tab, select [Image 
jump w/ 6], then press < 0>.
2Select the jump method.
  Turn the < 5> dial to select the jump 
method, then press < 0>.
d : Display images one by one
e : Jump 10 images
f : Jump 100 images
g : Display by date
h : Display by folder
i : Display movies only
j : Display stills...

253
You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor.
1Magnify the image.
 The image can be magnified during 
image playback (single-image 
display), during image review after 
image capture, and from shooting-
ready state.
  Press the < u> button.
X The magnified view will appear. The 
magnified area and [ 6u] will be 
displayed on the lower right of the 
screen.
  The image magnification increases 
as you turn the  dial clockwise. 
You can magnify the image up to 10x.
  The...

254
u Magnified View
Under the [ 33] tab, when you select 
[Magnificatn (apx)], you can set the 
starting magnification and initial position 
for the magnified view.
  1x (no magnification)
The image will not be magnified.  The magnified view will start with 
the single-image display.
  2x, 4x, 8x, 10x (magnify from center)
The magnified view will start at  the image center at the selected 
magnification.
  Actual size (from selected point)
The recorded image’s pixels will be  displayed at approx. 100%....

255
You can rotate the displayed image to the desired orientation.
1Select [Rotate image].
 Under the [ 31] tab, select [Rotate 
image ], then press < 0>.
2Select an image.
  Turn the < 5> dial to select the 
image to be rotated.
  You can also select an image on the 
index display (p.251).
3Rotate the image.
 Each time you press < 0>, the 
image will rotate clockwise as follows: 
90°  → 270°  → 0°.
  To rotate another image, repeat steps 
2 and 3.
  Press the  button to return to 
the menu.
b  Rotating...

256
You can rate images and movies with one of five rating marks: l/m/
n/o/p . This function is called rating.
1Select [Rating].
 Under the [ 32] tab, select [Rating ], 
then press < 0>.
2Select an image or movie.
  Turn the < 5> dial to select the 
image or movie to be rated.
  If you press the < u> button and turn 
the < 6> dial counterclockwise, you 
can select an image or movie from a 
three-image display. To return to the 
single-image display, turn the < 6> 
dial clockwise.
3Rate the image or...

257
Setting Ratings
Under [85:J /Kbutton function ], if you set [Rating ( J and K  
disabled) ] (p.330), you can press the < J> button to rate images/
movies during playback.
1Set the  button’s function.
  Set [ 85:J /Kbutton function ] to 
[Rating ( J and  Kdisabled) ].
2Playback the image.
 Turn the < 5> dial to select the 
image or movie to be rated.
3Rate the image or movie.
  Each time you press the < J> button, 
the rating mark will change:  l/m /
n /o /p/None.
  To rate another image or movie,...

258
During playback, you can press the  button to set the following: 
[K : Protect images , b : Rotate image,  9: Rating, R : RAW image 
processing (RAW images only),  S: Resize (JPEG image only),  : 
Highlight alert , : AF point display , e : Image jump w/6 ].
For movies, only the function s in bold above can be set.
1Press the  button.
  During image playback, press the 
 button.
X The Quick Control screen will appear.
2Select a function and set it.
  Tilt < 9> up or down to select a 
function.
X The...

259
Q Quick Control During Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD ]. If [ 51: Auto rotate ] 
is set to [ OnD] or [ Off], the [ b Rotate image ] setting will be  recorded to 
the image, but the came ra will not rotate the image for display.
 Press the < Q> button during index display to  switch to the single-image 
display and the Quick Co ntrol screen will appear. Pressing the < Q> 
button again will return to the index display.
  For images taken with another camera , the...

260
You can play back movies in the following three ways:Use the provided AV cable or an HDMI 
Cable HTC-100 (sold separately) to 
connect the camera to a TV set. Then 
you can play back captured movies and 
still photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full High-Definition 
(Full HD: 1920x1080) and High-
Definition (HD: 1280x720) movies with 
higher image quality.
You can play back movies on the 
camera’s LCD monitor. You can...