Canon Camera Eos 1d X User Manual

301
Preparing to Print
6Play back the image.
 Press the  button.
X The image will appear, and the < w> 
icon will appear on the upper left to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Movies cannot be printed.
  The camera cannot be used  with printers compatible only with CP Direct 
or Bubble Jet Direct.
  Do not use any interface cable other than the  one provided.
  If there is a long beeping sound in st ep 5, it indicates a problem with the 
printer. Resolve the problem...

302
The screen display and setting options will differ depending on the 
printer.  Some settings may not be available. For details, refer to the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the  icon is 
displayed on the upper left of the LCD 
monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press .
X The print setting screen will appear.
3Select [Paper settings].
  Select [Paper settings ], then press 
< 0 >.
X The paper setting screen will appear.
w...

303
wPrinting
 Select the size of the paper loaded in 
the printer, then press < 0>.
X The paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
X The page layout screen will appear.
  Select the page layout, then press 
.
X The print setting screen will reappear.
*1: From the Exif data, the camera name, lens name, shooting mode, shutter speed, 
aperture, exposure compensation amount , ISO speed, white balance, etc., will be 
imprinted.
*2: After ordering...

304
wPrinting
4Set the printing effects.
 Set if necessary. If you do not need to 
set any printing effects, go to step 5.
  What is displayed on the screen 
differs depending on the printer.
  Select the option, then press < 0>.
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is highlighted next to 
< z >, you can also adjust the 
printing effect (p.306).
* When you change the printing effects, changes are reflected in the image 
displayed on the upper left. Note that  the...

305
wPrinting
5Set the date and file number 
imprinting.
 Set if necessary.
  Select <
I>, then press .
  Set as desired, then press < 0>.
6Set the number of copies.
  Set if necessary.
  Select , then press < 0>.
  Set the number of copies, then press 
.
7Start printing.
  Select [Print ], then press < 0>.
When imprinting the shooting informat ion (p.303) of an image shot at ISO 
51200, H1, or H2, th e correct ISO speed may not be imprinted.
 The [ Default ] setting for printing effect s and other...

306
wPrinting
In step 4 on page 304, select the printing 
effect. When the < e> icon is highlighted 
next to < z>, you can press the 
< B > button. You can then adjust the 
printing effects. What can be adjusted or 
what is displayed will depend on the 
selection made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen displayed,...

307
wPrinting
You can crop the image and print only 
the trimmed portion as if the image was 
recomposed.
Set the trimming right before printing. 
If you set the trimming and then set the 
print settings, you may have to set the 
trimming again before printing.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
 The image area within the tri mming frame will be printed. The 
trimming frame’s aspect ra tio can be changed with [
Paper settings]....

308
wPrinting
 Depending on the printer,  the trimmed image area may not be printed as 
you specified.
  The smaller you set the trimming frame, the grainier the picture will look 
in the print.
  While trimming the image, look at th e camera’s LCD monitor. If you look 
at the image on a TV sc reen, the trimming frame may not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no in k, no paper, etc.) and select [Continue] to 
resume printing but it does  not resume, operate...

309
You can set the print type, date imprinting, and file number imprinting. 
The print settings will be applied to  all print-ordered images. (Settings 
cannot be set individually for each image.)
1Select [Print order].
 Under the [ 31] tab, select [Print 
order], then press < 0>.
2Select [Set up].
  Select [Set up ], then press .
3Set the option as desired.
  Set the [Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, 
then press < 0>.
W...

310
W Digital Print Order Format (DPOF)
4Exit the setting.
 Press the < M> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images  are printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded date on the print.
Off
File numberOn[On ] imprints the file  number on the print.
Off
  Even if [...