Canon camcorder HV10 User Manual

 Connecting to a Printer
External Connecti ons
E
71
The trimming frame appears.
2Change the size of the trimming 
frame.
• Move the zoom lever toward  T to 
shrink the frame, and toward  W to 
enlarge it. 
• To cancel the trimming settings, 
move the zoom lever toward  W until 
the trimming frame disappears.
3Adjust the trimming frame as 
desired and then press   to 
return to the print setting menu. Repeatedly press   to toggle 
between the adjustment options and 
make the adjustment ( ) as 
necessary...

Connecting to a Printer 72
Setting Print Orders from the Index Screen
Move the zoom lever toward W to enter 
the still image index screen.
*  and the number of copies appear on  images marked with a print order. To cancel 
the print order set ( ) the number of copies 
to 0.
**After closing the menu the camcorder returns 
to the index screen.
Erasing All Print Orders
Printing
1Connect the camcorder to the 
printer using the USB connection –
connection type   ( 64)– shown 
in the previous section  PC...

 Trouble?73
Additional  Informati on
E
Additional Information 
Trouble?
If you have a problem with your camcorder, re fer to this checklist. Consult your dealer 
or a Canon Service Center if the problem persists.
Power Source
Recording/Playback
Troubleshooting
Problem Solution
• Camcorder will not turn on.
• The camcorder switches off  by itself.
• The cassette compartment  cover will not open.
• The cassette compartment  stopped half way while 
inserting/removing a tape.
• The LCD/viewfinder switches...

74Trouble? 
Recording
Playback
Video noise appears on screen. When using the camcorder in a room where a plasma TV is located, keep a distance between the camcorder and the 
plasma TV. –
Video noise appears on the TV 
screen. When using the camcorder in a room where a TV is located, 
keep a distance between the compact power adapter and the 
power or antenna cables of the TV.  –
The tape stops during record 
pause or playback pause. To protect the tape and video heads, the camcorder will enter 
the stop...

 Trouble?75
Additional  Informati on
E
Memor y Card Operation
No sound from the built-in 
speaker. Open the LCD panel. –
Speaker volume is turned off. Adjust the volume with the   
dial. 27
When playing back a tape 
recorded in HDV standard the 
playback is jerky or the sound 
stutters on and off. Video heads are dirty. Clean the video heads. 82
Image will not appear on the 
TV screen. Set [AV DV] to [OFF]. 33
Check again that the camcorder is properly connected to the TV. 57
When connecting the...

76Trouble? 
Printing
Editing
Others
List of Messages
Problem Solution
The printer is not operating 
even though the camcorder 
and printer are correctly 
connected.Disconnect the USB cable and turn off the camcorder and the 
printer. After a short while, turn them on again, set the 
camcorder to   mode and restore the connection.
–
Problem Solution
Cannot record with this 
camcorder video input from an 
external video device 
connected to the HDV/TV 
terminal using a DV cable.Set [AV DV] to [OFF]. 33...

 Trouble?77
Additional  Informati on
EINCORRECT TAPE 
SPECIFICATION You attempted to play back a tape recorded in a different television 
system (PAL or SECAM) or in a recording standard not supported 
by this camcorder. –
INPUT SIGNAL NOT 
SUPPORTED The digital device connected with the DV cable is incompatible with 
the camcorder. –
PLAYBACK STD LOCKED
INCOMPATIBLE VIDEO 
INPUT Current camcorder settings do not match the HDV/DV standard of 
the video input signal. Change the [PLAYBACK STD] setting to...

78Trouble? 
Direct Print Related Messages
NOTES
About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes or an error 
message appears on the printer’s operation panel, refer to the printer’s instruction manual.
Message Explanation/Solution
PAPER ERROR  There is a problem with the paper. The paper is not correctly loaded or the  paper size is wrong.
Alternatively, if the paper output tray is closed, open it to print.
NO PAPER Paper is not correctly inserted or there is no paper....

 Do’s and Don’ts79
Additional  Informati on
E
Do’s and Don’ts
Camcorder
   Do not carry the camcorder by the LCD 
panel. Be careful when closing the LCD 
panel.
   Do not leave the camcorder in places 
subject to high temperatures (like the 
inside of a car under direct sunlight), or 
high humidity.
   Do not use the camcorder near strong 
electric or magnetic  fields such as above 
TVs, near plasma TVs or mobile phones.
   Do not point the lens or viewfinder at 
strong light sources. Do not leave the...

80Do’s and Don’ts 
  Replace the battery pack if the usable 
time after full charge diminishes 
substantially at normal temperatures.
About the batter y terminal cover
The battery terminal cover has a [ ]-
shaped hole. This is useful when you 
wish to differentiate between charged and 
uncharged battery packs. 
Back side of the battery pack
Terminal cover attached
Charged
Uncharged
Cassette
   Rewind tapes after use. A slack or 
damaged tape may cause video problems 
and/or audio distorti ons during...