Canon camcorder HV10 User Manual

 Connecting to a TV or VCR
External Connecti ons
E
61
6This camcorder: Stop playback.
NOTES
   We recommend powering the camcorder 
using the compact power adapter.
   When recording to a VCR using an analog 
connection –connection type   ( 57)–, the 
quality of the edited tape will be lower than the 
original.
   When recording to a digital video recorder 
using the HDV/DV terminal –connection type   
( 57)–:
- If the picture does not appear, disconnect the 
DV cable and restore the connection after a...

Connecting to a TV or VCR 62
Digital Video Dubbing
You can input video from other digital 
video devices and record the input video 
on the tape in the camcorder. Video input 
will be recorded on the tape in the same 
standard of the original (HDV or DV).
POINTS TO CHECK
Set [PLAYBACK STD] to [  AUTO] 
( 34) before making the connections.
Connecting
Connect the camcorder to the video input 
source using the digital connection 
–connection type   ( 57)– shown in 
the previous section  Connection 
Diagrams...

 Connecting to a TV or VCR
External Connecti ons
E
63
RESTRICTED” appears and you will not be 
able to record the contents of the tape.
Analog/Digital Conversion 
Using the camcorder you can convert 
analog video signals (for example from a 
VCR) to digital signals (DV standard only) 
and output them to a digital recording 
device. 
Connecting
Connect the camcorder to the video input 
source using an analog connection
–connection type 
 (57)– shown in the 
previous section  Connection Diagrams .
Connect...

Connecting to a Computer 64
Connecting to a Computer
PC Connection Diagrams
Connecting to a Computer
USB TerminalOpen the rear terminal cover to 
access.
HDV/DV Ter minalCheck the type and orientation 
of the terminal and make sure 
you connect the DV cable 
properly.
Terminal on the Camcorder Connecting CableTerminal on the Connected 
Device
1Output connection (Signal Flow  ) to a PC or PictBridge compatible printer with an 
USB port.
USB Cable (Supplied)
2Output connection (Signal Flow  ) to a computer...

 Connecting to a Computer
External Connecti ons
E
65
Transferring Video Recordings
You can transfer recordings to a computer 
using the HDV/DV terminal.
Equipment and System Requirements 
   A computer equipped with an 
IEEE1394 (DV) terminal or an IEEE1394 
(DV) capturing board.
   A DV cable (commercially available).
   Video Editing Software.
   The appropriate driver
The standard of the video transferred 
depends on the standard of the original 
recording and the compatibility of the 
video editing...

Connecting to a Computer 66
Transferring Still Images – Direct 
Transfer
With the supplied USB cable and Digital 
Video Software, you can transfer still 
images to a computer simply by pressing  (print/share).
Preparations
The first time you connect the camcorder 
to the computer, you need to install the 
software and set the auto-launch setting. 
From the second time on, you will only 
need to connect the camcorder to the 
computer to transfer images.
1Install the supplied Digital Video 
Software.See...

 Connecting to a Computer
External Connecti ons
E
67
1Select ( ) a transfer option.
2Press .
[ ALL IMAGES], [ NEW IMAGES], 
[ TRANSFER ORDERS]:
• The images are transferred and 
displayed on the computer.
• The camcorder returns to the transfer 
menu once the transfer is complete.
• To cancel the transfer, press  .
IF YOU SELECT [ SELECT & TRANSFER] OR 
[ WALLPAPER] 
3Press .
4Press   or   to select the image 
you wish to transfer and press   to transfer it.
• [ SELECT & TRANSFER]: The 
selected image is...

Connecting to a Printer 68
*  appears on images marked with a transfer order. Press   to cancel the 
transfer order.
**After closing the menu the camcorder returns  to the index screen.
Erasing All Transfer Orders
Connecting to a Printer
Printing Still Images – Direct Print
The camcorder can be connected to any 
PictBridge compatible printer. You can mark 
the still images you want to print and set the 
desired number of copies as a print order 
( 71).
Canon printers: SELPHY CP and SELPHY 
DS printers...

 Connecting to a Printer
External Connecti ons
E
69
   We recommend powering the camcorder 
using the compact power adapter.
   Refer also to the printer’s instruction manual.
Printing with the  (Print/Share) 
Button
You can print a still image without 
changing the settings simply by pressing 
 (print/share).
1Press   or   to select the image 
you wish to print.
2Press  (print/share).
• Printing starts. The   button 
flashes and stays on when the  printing 
is completed.
• To continue printing, select...

Connecting to a Printer 70
print by selecting 2-, 4-, 9- or [16-UP]. You can 
also use this setting to print on the specially 
designed photo stickers sheets.
- When the paper size is set to [A4] you can 
print 4 copies on the same sheet by selecting 
[4-UP].
  
Canon PIXMA/SELPHY CP Printers: 
- When the paper size is  set to [CREDITCARD] 
you can print multiple small copies on a single 
print by selecting 2-, 4-, or [8-UP]. You can also 
use [8-UP] to print on the specially designed 
photo stickers...