Canon 80d Manual

431
8: Fine Adjustment of AF’s Point of Focus
4Make the adjustment.
For a zoom lens, select the wide-
angle (W) or telephoto (T) end. 
Pressing <
0> will turn off the frame 
and make the adjus tment possible.
Set the adjustment amount, then 
press . The adjustable range is 
±20 steps.
Setting it toward “-:a” will shift the 
point of focus in front of the standard 
point of focus.
Setting it toward “+:b” will shift the 
point of focus to the rear of the 
standard point of focus.
For a zoom lens,...

8: Fine Adjustment of AF’s Point of Focus
432
When [j Clear all] appears at the bottom of the screen, pressing the 
 button will clear all the adjustments made for [1: All by same 
amount
] and [2: Adjust by lens].
Clearing All AF Microadjustments
When shooting with the intermediate range (focal length) of a zoom lens, the 
AF’s point of focus is corrected automatically relative to the adjustments 
made for the wide-angle and telephoto ends. Even if only the wide-angle or 
telephoto end has been...

433
You can assign often-used functions to camera buttons or dials according to your preferences.
1Select [C.Fn III: Operation/
Others].
Under the [8] tab, select [C.Fn III: 
Operation/Others], then press 
<
0>.
2Select [4: Custom Controls].
The Custom Controls screen will 
appear.
3Select a camera button or dial.
Select a camera button or dial, then 
press <
0>.The name of the camera control and 
the assignable functions will be 
displayed.
The location of the camera control 
can be checked in the...

8: Custom Controls
434
Assignable Functions to Camera Controls
FunctionPageVrt
AF
aMetering and AF start
436kkk
b AF stop
kk
cONE SHOT z AI SERVO/SERVO
SAF point direct selection
Exposure q
Metering start
437k
tAE lock/FE lockkk
AAE lockkk
A AE lock (while button pressed) k
TAE lock (hold)kk
dFE lock
438
kk
e
Set ISO speed (hold button, turnS)
fExposure compensation 
(hold button, turn S)
sShutter speed setting in M mode
f Aperture setting in M mode
FlashyFlash exposure compensation
438
0/3Flash function...

435
8: Custom Controls
e0*sSTT
k
kk
kk
k
kk
kk
kk
kk
k
k
kk
kk
k
k
k
k
k
k
kk
k
kkk
* The AF stop button ( 0) is provided only on  super telephoto IS lenses. 

8: Custom Controls
436
When you press the button assigned to this function, metering and AF 
are executed.
The AF will stop while you hold down the button assigned to this 
function. Useful when you want to  stop the AF during AI Servo AF.
You can switch the AF operation. In One-Shot AF mode, when you hold 
down the button to which this functi on is assigned, the camera switches 
to AI Servo AF mode
*. In the AI Servo AF mode, the camera switches to 
One-Shot AF mode only while you hold down the button....

437
8: Custom Controls
When you press the shutter button halfway, exposure metering is 
performed (AF is not performed).
Normal shooting (No flash)
When you press the button assigned to this function, you can lock the 
exposure (AE lock) during the metering.  Useful when you want to focus 
and meter the shot at different areas or when you want to take multiple 
shots at the same exposure setting.
With flashDuring flash photography, pressing t he button assigned to this function 
will fire a preflash and...

8: Custom Controls
438
For flash photography, pressing the button assigned to this function will 
fire a preflash and record the required flash output (FE lock).
You can set the ISO speed by holding down <
0> and turning the 
<
6> dial. If this control is used  while ISO Auto is set, manual ISO 
speed setting will take effect. If  you use this function in the <
a> mode, 
you can adjust the exposure with  the ISO speed while maintaining the 
current shutter speed and aperture.
You can set the exposure c...

439
8: Custom Controls
Press  to display the image-recording quality setting screen 
(p.142) on the LCD monitor.
Press <
0> to display the Picture Style  selection setting screen on the 
LCD monitor (p.154).
Press <
0> to display the white balance setting screen (p.162) on the 
LCD monitor.
When you press the depth-of-field preview button, the aperture will stop 
down and you can check the depth of field (p.195).
If you press the button assigned to th is function when the lens’s IS 
switch is set to <...

440
Under My Menu tab, you can register menu items and Custom 
Functions whose settings you change frequently. You can also name 
the registered menu tabs and press the <
M> button to display the 
My Menu tab first.
1Select [Add My Menu tab].
Under the [9] tab, select [Add My 
Menu tab
], then press .
2Select [OK].
The [MY MENU1] tab is created.
You can create up to five menu tabs 
by repeating steps 1 and 2.
1Select [Configure: MY MENU*].
Turn the  dial to select 
[
Configure: MY MENU*] (tab for...