Canon 5d Mark 2 Instruction Manual

151
Basically, there are the following three ways to playback the movies you 
shot.
Use the provided stereo video cable or 
HDMI Cable HTC-100 (sold separately) 
to connect the camera to a TV set. You 
can then playback the captured movies 
and photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full HD (Full High-
Definition 1920x1080) movies with 
higher image quality.
You can playback movies on the 
camera’s LCD monitor. You can also...

152
k Enjoying Movies
(See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser)
The movie files recorded in the card can 
be transferred to a personal computer 
and played or edited with ZoomBrowser 
EX/ImageBrowser (provided software).
You can also extract a single frame from 
a movie and save it as a still photo.
Playback and Editing with a Personal Computer
 To have the movie playback smoothl y on a personal computer, the 
personal computer must be a high-performance model. Regarding the...

153
1Playback the image.
 Press the < x> button to display the 
image.
2Select a movie.
 Turn the  dial to select the image.  During the single-image display, the 
 icon displayed on the 
upper left indicates that it is a movie.
 
During the index display, the perforation 
on the left edge of  the image indicates 
that it is a movie. 
Movies cannot be 
played from the in dex display. Press 
the <
u> button to switch to the 
single-image display.
3Press < 0>.
 On the single-image display, press .XThe...

154
k Playing Movies
ItemPlayback Description
2 ExitReturns to the single-image display.
7 PlayPressing  toggles between play and stop.
8 Slow motionAdjust the slow motion speed by turning the < 5> dial. The 
slow-motion speed is indi cated on the upper right.
5 First frameDisplays the movie’s first frame.
3 Previous frameEach time you press , a single previous frame is 
displayed. If you hold down , it will rewind the movie.
6 Next frameEach time you press , the movie will play frame-by-
frame. If you...

155
You can playback the images in the card as an automatic slide show.
1Select [Slide show].
 Under the [ 4] tab, select [ Slide 
show ], then press < 0>.
2Select the images to be played 
back.
  Turn the < 5> dial to select the item, 
then press < 0>.
[All images/Movies/Stills]
  Turn the < 5> dial to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Folder/Date]
  Turn the < 5> dial to select either 
[
nFolder] or [i Date].
  When < z > is displayed 
brightly, press...

156
3 Slide Show (Auto Playback)
 3Set the playback time and repeat 
option.
 Turn the < 5> dial to select [ Set up], 
then press < 0>.
  For still photos, set the [ Play time] 
and [Repeat ] options, then press the 
< M > button.
4Start the slide show.
 Turn the < 5> dial to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed 
for a few seconds, the slide show will 
start.
  To pause the slide show, press < 0>. 
During pause, [ ] will be displayed 
on the upper left of the...

157
You can also view the still photos and movies on a TV set. Before 
connecting or disconnecting the cable between the camera and 
television, turn off the camera and television.
* Adjust the movie’s sound  volume with the TV set.* Depending on the TV set, part of the image di splayed might be cut off.
1Connect the provided stereo 
video cable to the camera.
 Connect the stereo video cable to the 
camera’s < q> terminal. Insert 
the cable plug all the way in.
2Connect the video cable to the TV 
set....

158
Viewing the Images on TV
The HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
 Connect the HDMI cable to the 
camera’s < D > terminal.
 
With the plug’s  logo 
facing the front of the  camera, insert it into 
the camera’s <
D> terminal.
2Connect the HDMI cable to the TV set.
  Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x>...

159
Protecting the image prevents it from being erased accidentally.
1Select [Protect images].
 Under the [ 3] tab, select [ Protect 
images ], then press < 0>.
X The protect setting screen will 
appear.
2Select the image and protect it.
  Turn the < 5> dial to select the 
image to be protected, then press 
< 0 >.
X When an image is protected, the 
 icon will appear on the screen.
  To cancel the image protection, press 
 again. The < K> icon will 
disappear.
  To protect another image, repeat step 
2....

160
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.159) will not be erased.
Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being er ased accidentally, protect it.
1Playback the image to be erased.
2Press the  button.
X The erase menu will appear at the 
bottom of the screen.
3Erase the image.
  Turn the < 5> dial to select [ Erase], 
then press < 0>. The image...