Canon 5d Instruction Manual

141
3 Print Ordering
4 Exit the menu.
 Press the < M> button.
X The Print Order screen will reappear.
  Next, select [ Order] or [All] to select 
the images to be printed.
Print type Standard Prints one image on one sheet.IndexMultiple, thumbnail images are printed on 
one sheet.
BothPrints both the standard and index prints.
DateOn[ On ] imprints the recorded  date on the print.Off
File No.On[On ] imprints the file  No. on the print.Off
K
L
L K
 RAW images cannot be  selected for printing.
  Even if [...

3 Print Ordering
142
1Select [Order].
 Turn the < 5> dial to select [ Order], 
then press < 0>.
X The order screen will appear.
2Select the image to be printed.
  Turn the < 5> dial to select the 
image to be printed.
  Press the < I> button to see a 
three-image view. To return to the 
single-image view, press the < u> 
button.
3Order the print.
  The print order will vary depending on 
the [ Print type ] (p.140) setting.
For [Standard] and [Both]
  For standard-type prints, you can set 
the quantity...

143
3 Print Ordering
For [Index]
 If you want to include the image in the 
index print, checkmark < X> the box. 
Otherwise, leave the box unchecked.
  Press < 0> to checkmark the box 
< X >, or press < 0> again to remove 
the checkmark.
  If there are other images you want to 
select, repeat steps 2 and 3.
  You can select up to 998 images.
4 Exit the menu.
 Press the < M> button.
X The Print Order screen will reappear.
  Press the < M> button again to 
save the print order to the CF card. 
The menu...

3 Print Ordering
144
The print order can also be set or  canceled for all the images in the CF 
card. For standard-type prints, a quant ity of one will be ordered for all 
the images.
Note that after following the “Selec ting Individual Images” procedure, if 
you do the “Selecting All Images” pr ocedure, the print order will change 
to “All images.”
1Select [All].
 Turn the < 5> dial to select [ All], 
then press < 0>.
X The All screen will appear.
2Select [Mark all].
  Turn the < 5> dial to select [...

145
With a printer compatible with direct printing, you can easily print 
images specified with DPOF.
1Prepare to print.
 See “Setting the Camera” (steps 1 
and 2) and “Connect the camera to 
the printer” (steps 1 to 5) on pages 
123 to 124.
2Select [Print order].
 Turn the < 5> dial to select [ x 
Print order ], then press < 0>.
X The Print Order screen will appear.
3Select [Print].
  Turn the < 5> dial to select [ Print], 
then press < 0>.
  [Print ] will be displayed only if the 
camera is connected...

3 Direct Printing with DPOF
146 A
CP Direct /  SBubble Jet Direct
  Set the [ Style]. (p.130/133)
5Start printing.
 Turn the < 5> dial to select [ OK], 
then press < 0>.
X The printing will start.
  To stop the printing, press < 0> while 
[ Stop ] is displayed, then turn the 
< 5 > dial to select [ OK] and press 
< 0 >.
  When printing with a PictBridge or Bu bble Jet Direct printer, be sure to 
set the paper size.
 
With PictBridge, the file No. cannot  be imprinted depending on the printer. If...

147
Customizingthe Camera
The current camera settings  can be saved under the 
Mode Dial’s < l> setting.
Also, Custom Functions enabl e you to fine-tune your 
camera to suit your shooting preferences.
  Custom Functions work in all modes except < 1> (Full 
Auto).  

148
Most of the current camera settings can be set under the Mode Dial’s  
setting. 
Set the shooting mode  to any mode except  (Full Auto). The camera settings cannot be  registered in the  (Full Auto) mode.
1Select [Register camera settings]. 
 Turn the < 5> dial to select [ c 
Register camera settings ], then 
press < 0>.
2Select [OK].
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X The following camera settings will be 
registered under the Mode Dial’s 
 setting:
Shooting settings
Shooting...

149
1Select [Custom Functions (C.Fn)]. 
 Turn the < 5> dial to select [ c 
Custom Functions (C.Fn) ], then 
press < 0>.
X The Custom Function screen will 
appear.
2Select Custom Function No.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
3Change the setting.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
  Repeat steps 2 and 3 if you want to 
set other Custom Functions.
 
On the bottom of the screen, you can see 
the current Custom Function settings.
4Exit...

3 Setting a Custom Function N
150
1Select [Clear settings]. 
 Turn the < 5> dial to select [ c 
Clear settings ], then press .
X The Clear settings screen will appear.
2Select [Clear all Custom 
Functions]. 
  Turn the < 5> dial to select [ Clear all 
Custom Functions ], then press 
< 0 >.
3Select [OK].
 Turn the  dial to select [OK], then 
press . All the Custom Functions 
will be reset to the default settings.
Resetting All Custom Functions N
 The C.Fn-00 focusing screen  setting will not be...