Canon 5d Instruction Manual

111
Image Playback
You can magnify the image by 1.5x to 10x on the LCD monitor.
1Display the image.
 Display the image in the single-image 
or image info. display mode.
2Magnify the image.
 Press the < u> button.
X First, the center of the image will be 
magnified.
  To increase the magnification, hold 
down the < u> button.
  Press the < I> button to reduce 
the magnification. Hold down the 
button to continue reducing the 
magnification until it reaches the size 
in step 1.
3Scroll around the image....

Image Playback
112
You can playback the CF card’s images in an automatic slide show. Each image will be displayed for about 3 sec.
1Select [Auto play].
 Turn the < 5> dial to select [ x 
Auto play ], then press < 0>.
X The auto play screen will appear.
2Start the auto play.
XAfter [ Loading image... ] is displayed 
for a few seconds, auto play will start.
  To pause the auto play, press < 0>.
  During pause, [ ] will be displayed 
on the upper left of the image. Press 
 again to resume the auto play....

113
Image Playback
You can rotate an image by 90° or 270° clockwise. Images will then be displayed in the correct orientation during playback.
1Select [Rotate].
 Turn the < 5> dial to select [ x 
Rotate ], then press < 0>.
X The Rotate screen will appear.
2Rotate the image.
  Turn the < 5> dial to select the 
image to be rotated, then press 
< 0 >.
X Each time you press < 0>, the image 
will rotate clockwise.
  To rotate another image, repeat step 
2.
  To stop rotating the image, press the 
 button....

114
During the single image, image with shooting information, index, or 
magnified image display, you can jump forward or back to images 
stored on the CF card.
1Playback the image.
2Go to the jump display.
  Press the < C> button.
X The jump bar will appear at the 
bottom of the screen.
3Jump forward or back.
  Turn the < 5> dial. 
  To quit the image jump, press the 
 button. The jump bar will 
disappear.
  Turn the < 5> dial to view the next or 
previous image.
During the single image and informat...

115
CJump Display
Jumping during the single image or image with shooting 
information display
Jump 10 images / Jump 100 images
Turn the < 5> dial clockwise to jump forward by 10 or 100 images. 
Or turn it counterclockwise to jump backward by 10 or 100 images.
Jump shot date
You can jump to a picture taken on a specific date. (If there are 
multiple pictures taken on the same date, the display will jump to 
the first picture taken on that date.) Turn the < 5> dial to jump to 
the previous or next date....

116
By connecting the camera to a TV set with the video cable (provided), 
you can view the captured images on  a TV set. Always turn off the 
camera and the television before connecting or disconnecting them.
1Connect the camera to the TV.
 Open the camera’s  terminal cover.
  Use the video cable (provided) to 
connect the camera’s < q> terminal 
to the TV monitor’s VIDEO IN 
terminal.
  Insert the cable plug all the way in.
2Turn on the TV and switch the 
TV’s line input to Video IN.
3Set the < 4>...

117
This prevents the image from being erased accidentally.
1Select [Protect].
 Turn the < 5> dial to select [ x 
Protect ], then press < 0>.
X The protect setting screen will 
appear.
2Protect the image.
  Turn the < 5> dial to select the 
image to be protected, then press 
< 0 >.
X When an image is protected, the 
 icon will appear below the 
image.
  To cancel the image protection, press 
 again. The < K> icon will 
disappear.
  To protect another image, repeat step 
2.
  To exit the image...

118
You can erase images individually or erase all the images at one time in \
the CF card. Only protected images will not be erased.Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them.
1Display the image.
 Press the < x> button.
2Select the image to be erased.
 Turn the < 5> dial to select the 
image to be erased.
3Display the erase menu.
  Press the < L> button.
X The...

119
LErasing Images
1Display the image.
  Press the < x> button.
2Display the erase menu.
 Press the < L> button.
X The Erase menu will appear at the 
bottom of the screen.
3Select [All].
  Turn the < 5> dial to select [ All], 
then press < 0>.
X The confirmation dialog will appear.
4Erase the images.
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X All unprotected images will be 
erased.
  While the images are being erased, 
you can cancel the erasure by 
pressing < 0>.
Erasing All Images...

120
Format the CF card before using it in the camera.Formatting a CF card will erase everything in the card. Even 
protected images will be eras ed, so make sure there is 
nothing you need to keep. If necessary, transfer images to a 
personal computer before formatting the card.
1Select [Format].
  Turn the < 5> dial to select [ c 
Format ], then press < 0>.
X The confirmation dialog will appear.
2Format the CF card.
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X The CF card will be formatted...