Canon 1dx Owners Manual

271
Viewing the Images on TV
2Connect the camera to a TV set.
 Use an HDMI cable to connect the 
camera to the TV.
X The TV’s input will switch 
automatically to the HDMI port 
connected to the camera.
3Press the camera’s < x> button.
XAn image will appear on the TV 
screen and you can use the TV’s 
remote control to play back images.
4Select an image or movie.
  Point the remote control toward the 
TV set and press the /  button to 
select an image.
5Press the remote control’s Enter 
button.
XThe menu...

272
Viewing the Images on TV
1Connect the provided AV cable to 
the camera.
 With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < q > terminal.
2Connect the AV cable to the TV 
set.
 Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminal.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the...

273
Protecting an image prevents it from being erased accidentally.
1Select the image to be protected.
 Press the < 3> button to play back 
images, then turn the < 5> dial to 
select the image.
2Protect the image.
  When you press the  button, the 
image will be prot ected and the  
icon will appear at the top of the 
screen.
  To cancel the image protection, press 
the < J> button again. The < K> 
icon will disappear.
  To protect another image, repeat 
steps 1 and 2.
1Select [Protect images].
 Under...

274
J Protecting Images
3Protect the image.
 Turn the  dial to select the image 
to be protected,  then press <
0>.
XThe image will be protected, and the 
 icon will appear at the top of 
the screen.
  To cancel the image protection, press 
 again. The < K> icon will 
disappear.
 
To protect another im age, repeat step 3.
 Press the  button to return to 
the menu.
You can protect all the images in a folder or on the card at one time. When you select [All images in folder ] 
or [ All images on card ]...

275
You can append a voice memo to a captured image. The voice memo will 
be saved as a WAV sound file with the same file number as the image. It 
can be played back with the camera or provided software.
1Select the image to which you 
want to append a voice memo.
 Press the < x> button to play back 
images, then turn the < 5> dial to 
select the image.
2Recording a Voice Memo
  Hold down the  for approx. 2 sec.
  When [ Recording memo... ] appears, 
keep pressing the button and speak 
into the voice...

276
K Recording and Playing Voice Memos
When [85: J /K button function ] is set to [Play memo (Hold: Rec. 
memo) ] (p.330), you can play back a voice memo appended to an 
image.
1Set [8 5: J /K  button function] 
to [Play memo (Hold: Rec. 
memo)].
  Set this function while referring to 
page 330.
2Select the image whose voice 
memo you want to playback.
 Press the < x> button to play back 
images, then turn the < 5> dial to 
select an image that has the [ ] icon 
displayed on the top.
3Playback a voice...

277
The images recorded on one card can be copied to the other card.
1Select [Image copy].
 Under the [ 31] tab, select [Image 
copy ], then press < 0>.
2Select [Sel.Image].
  Check the copy source and target 
card’s capacity.
  Turn the < 5> dial to select 
[Sel.Image ], then press < 0>.
3Select the folder.
  Turn the < 5> dial to select the folder 
containing the image to be copied, 
then press < 0>.
  Refer to the images displayed on the 
right to select the desired folder.
X The images in the...

278
a Copying Images
 4Select the images to be copied.
  Turn the < 5> dial to select an image 
to be copied, then press < 0>.
X The < X> icon will appear on the 
upper left of the screen.
  If you press the < u> button and turn 
the < 6> dial counterclockwise, you 
can select an image from a three-
image display. To return to the single-
image display, turn the < 6> dial 
clockwise.
  To select other images to be copied, 
repeat step 4.
5Press the < J> button.
 After selecting all the images to be...

279
a Copying Images
8Select [OK].
  Check the copy source and target 
card’s information.
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X The copying will start and its progress 
will be displayed.
  When the copying is completed, the 
result will be displayed.
  Select [OK ] to return to the screen in 
step 2.
You can copy all the images in a fol der or on a card at one time. Under 
[x1: Image copy ], when you select [ Sel.n] or [All image], you can 
copy all the images in t he folder or on...

280
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.273) will not be erased.
Once an image is erased, it cann ot be recovered. Make sure you 
no longer need the im age before erasing it. To prevent important 
images from being erased accide ntally, protect them. Erasing a 
RAW+JPEG image will erase both the RAW and JPEG images.
1Play back the image to be erased.
2Press the  button.
X The Erase menu will appear at the 
bottom of the screen.
3Erase the...