Home > Brother > Sewing Machine > Brother X-3 Manual

Brother X-3 Manual

Here you can view all the pages of manual Brother X-3 Manual. The Brother manuals for Sewing Machine are available online for free. You can easily download all the documents as PDF.

Page 31

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
20
KNOWING YOUR SEWING MACHINEOMPELUKONEESEEN TUTUSTUMINENCONOZCA SU MÁQ
UINA DE COSER
СВЕДЕНИЯ О ШВЕЙНОЙ МАШИНЕ
Costura con aguja doble (Opción)
Su máquina de coser ha sido concebida para poder utilizar una agu-
ja doble y permitir la costura con dos hilos superiores. Puede usar el
mismo color de hilo o dos hilos de colores distintos para puntadas
decorativas. Sin embargo, debe asegurarse de que los dos...

Page 32

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
21
KNOWING YOUR SEWING MACHINEOMPELUKONEESEEN TUTUSTUMINENCONOZCA SU M
ÁQUINA DE COSER
СВЕДЕНИЯ О ШВЕЙНОЙ МАШИНЕ
A-1 A
21 2
1
0123456789
B-1 B
21 2
1
0123456789
Thread Tension
Thread tension will affect the quality of your stitches. It may need to be
adjusted when you change fabric or thread type.
NOTE:
It is recommended that a test sample be made on a fabric scrap before
sewing on your project.
The basic...

Page 33

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
22
KNOWING YOUR SEWING MACHINEOMPELUKONEESEEN TUTUSTUMINENCONOZCA SU MÁQ
UINA DE COSER
СВЕДЕНИЯ О ШВЕЙНОЙ МАШИНЕ
D
21
2
1
NOTE:
The bobbin thread tension has already been adjusted at the factory for
general use. For most sewing applications, no adjustment is needed.
When sewing with thin thread on thin fabrics, the thread tension may
not be adjusted adequately with the upper tension control dial. There-
fore,...

Page 34

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
23
KNOWING YOUR SEWING MACHINEOMPELUKONEESEEN TUTUSTUMINENCONOZCA SU M
ÁQUINA DE COSER
СВЕДЕНИЯ О ШВЕЙНОЙ МАШИНЕ
CHART OF SEWING FABRICS, NEEDLES AND THREAD COMBINATIONS
SEWING FABRICS NEEDLE SIZES THREAD SIZES
Cotton: 80
Synthetic/ Polyester Long Fiber
Fine Mercerized Cotton
Cotton: 60~80
Silk: “A”
Synthetic/ Polyester Long Fiber
Mercerized 50
Cotton: 50~60
Silk: “A”
Synthetic/ Polyester Long Fiber...

Page 35

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
24
KNOWING YOUR SEWING MACHINEOMPELUKONEESEEN TUTUSTUMINENCONOZCA SU MÁQ
UINA DE COSER
СВЕДЕНИЯ О ШВЕЙНОЙ МАШИНЕ
TABLA DE COMBINACIONES ENTRE TEJIDOS, AGUJAS E HILOS
TEJIDOS TAMAÑO DE LA AGUJA TAMAÑO DEL HILO
Algodón: 80
Sintético/ Fibra larga de poliéster
Algodón mercerizado fino
Algodón: 60/80
Seda: “A”
Sintético/ Fibra larga de poliéster
Mercerizado 50
Algodón: 50/60
Seda: “A”
Sintético/ Fibra larga de...

Page 36

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
25
STRAIGHT AND ZIGZAG STITCHING
SUORA- JA SIKSAKOMMELPUNTADAS RECTAS Y ZIGZAG
ПРЯМАЯ СТРОЧКА И СТРОЧКА “ЗИГЗАГ”
Straight Stitching
STITCH LENGTH F-4
STITCH WIDTH 0
NEEDLE POSITION M, L, R (For twin needle sewing, always set
at  M.)
PRESSER FOOT Zigzag
NEEDLE Single or Twin
Starting Sewing
1. Raise the needle to its highest position and lift the presser foot le-
ver.
2. Pull up the bobbin thread by turning...

Page 37

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
26
STRAIGHT AND ZIGZAG STITCHING
SUORA- JA SIKSAKOMMELPUNTADAS RECTAS Y ZIGZAG
ПРЯМАЯ СТРОЧКА И СТРОЧКА “ЗИГЗАГ”
Changing Sewing Directions (fig. A)
1. Stop the machine at the point where you wish to change directions
with the needle still in the fabric. If  the needle ends in the up
position turn the balance wheel toward you (counterclockwise) until
the needle enters the fabric.
2. Raise the presser foot and...

Page 38

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
27
STRAIGHT AND ZIGZAG STITCHING
SUORA- JA SIKSAKOMMELPUNTADAS RECTAS Y ZIGZAG
ПРЯМАЯ СТРОЧКА И СТРОЧКА “ЗИГЗАГ”
Sewing Fabric Edges
For sewing thin fabric:
While pulling both the needle and bobbin threads toward the back of
the machine, start sewing at a slow speed.
For sewing thick fabric:
The fabric does not feed smoothly when the presser foot is slanted as
shown in the illustration. If this occurs, place...

Page 39

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
28
STRAIGHT AND ZIGZAG STITCHING
SUORA- JA SIKSAKOMMELPUNTADAS RECTAS Y ZIGZAG
ПРЯМАЯ СТРОЧКА И СТРОЧКА “ЗИГЗАГ”
For sewing denim
When sewing more than two layers of denim, help feed the fabric by
carefully guiding it over the feed dogs with your hands. (Feeding will
be easier if the fabric is slightly stretched, or if the sewing machine is
stopped, the presser foot lever raised and a piece of folded fabric...

Page 40

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
29
STRAIGHT AND ZIGZAG STITCHING
SUORA- JA SIKSAKOMMELPUNTADAS RECTAS Y ZIGZAG
ПРЯМАЯ СТРОЧКА И СТРОЧКА “ЗИГЗАГ”
Removing the Fabric from the Machine
1. Stop the machine.
2. Turn the balance wheel toward you (counterclockwise) to bring the
needle and thread take-up lever to their highest position.
3. Lift the presser foot and pull the fabric out gently to the left side.
4. Cut both threads using the thread...
Start reading Brother X-3 Manual

Related Manuals for Brother X-3 Manual

All Brother manuals